Used Daewoo Mega 200-V for sale (68)

Condition: good (used), Engine freshly overhauled (over 12tys zl). 100% operational Ljdpfxott T Nfj Abnjhd I invite you to contact me

Condition: used, Year of construction: 2007, operating hours: 7,800 h, Empty weight: 8.000 kg Lhsdpfx Abjydl R Ioned = Additional options and accessories = - Rubber tracks

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 1,260 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: 18M, total height: 3,214 mm, total width: 2,980 mm, table load: 1,200 kg, overall weight: 12,000 kg, spindle speed (max.): 4,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,480 mm, number of axes: 3, This 3-axis DAEWOO ACE V 600 was manufactured in 1997. It features an impressive X-axis travel of 1,260 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1,400 x 700 mm and a maximum table load of 1,200 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO ACE V 600 vertical machining centre we have for sale. Contact us for further details. Lsdpfxoyq Exle Abnjhd • Spindle taper: BT50 / ISO 50 • Tool magazine capacity: 40 tools (header mentions 30 tools) • Spindle nose to table distance: 200–770 mm • Maximum workpiece height: 610 mm • Table size: 1,400 × 700 mm • Rapid traverse rate: 20 m/min • Distance from spindle center to column: 680 mm

Year of construction: 2002, condition: ready for operation (used), Offered is a vertical turning center: travels X/Y: 390mm/750mm, rapid traverse X/Y: 20m/min, swing diameter max.: 800mm, turning diameter max.: 730mm, turning height max.: 750mm, chuck diameter: 500mm, speed range: up to approx. 2000rpm, spindle nose: A2-11, torque max.: approx. 2300Nm, tool turret: 12 positions, tool holder: BMT75, CNC control: FANUC Series 18-iT, space requirement X/Y/Z: approx. 2100mm/3250mm/3350mm, machine weight: approx. 9500kg. Inspection possible by arrangement. Lhsdpfx Asylbt Iobned

Condition: used, Year of construction: 1998, Turning length 322 mm Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Lhedpfx Aex N A N Hebned Tail stock Various tool holders & collets 3-jaw chuck

Condition: used, Year of construction: 2001, Daewoo Puma V300 CNC Lathe Fanuc 18 – T Vertical lathe Daewoo PUMA V300 Year of installation: 2001 Kitagawa chuck, diameter 305 mm Lsdjyahy Dopfx Abnehd Max. swing diameter over bed: 550 mm Max. turning diameter: 410 mm Max. turning height: 420 mm Spindle speed: 2,500 rpm AC motor power (cont./30 min.): 18.5 kW Turret with 8 tools Drilling diameter: 50 mm Tool section: 25 mm Control: Fanuc Series 18-T Equipped with chip conveyor Complete with documentation

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Lhedolyrbzopfx Abnod Technical book with characteristics of machine is in attachment.

Condition: used, Year of construction: 2001, CNC FANUC 18i M Lhedpfjkx E Tbsx Abnod X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: ready for operation (used), Year of construction: 2000, Control Unit Brand FANUC Model 18-M Main Drive Ledsx Eni Rjpfx Abnehd Number of axis 3 Movement X-Axis Movement 560 mm Z-Axis Movement 570 mm Y-Axis Movement 400 mm This 3-axis DAEWOO ACE-V400 vertical machining center was manufactured in 2000. It features a working envelope of XYZ dimensions 560 x 400 x 570 mm and includes a hand wheel. If you are looking to get high-quality milling capabilities, consider the DAEWOO ACE-V400 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand FANUC Movement X-Axis Movement 250 mm Y-Axis Movement ±50 mm Z-Axis Movement 580 mm This 5-axis DAEWOO PUMA 2000 SY turn-mill centre was manufactured in 2003. It features a max turning diameter of 330 mm, length of 510 mm, and rapid feeds up to 24,000 mm/min. Includes main and sub-spindle capabilities, both with C-axis, and a 12-station turret with live tooling. Consider the opportunity to buy this DAEWOO PUMA 2000 SY turn-mill centre. Contact us for more information about this machine. Application Types Ljdpex D Sciefx Abnohd Turning

Condition: ready for operation (used), Year of construction: 2005, operating hours: 6,235 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 800 mm, spindle motor power: 22,000 W, overall weight: 11,600 kg, controller manufacturer: FANUC, controller model: 18i-TB, swivel angle C-axis (max.): 360 °, number of axes: 3, This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine. Additional equipment • Measuring Probe: Tool Measuring Probe • Automatic Bar Loader: ILS-RBK10016 L 2265 mm, W 1116 mm, Approx. 490 kg Ljdpfx Abjx D H Tconshd • Bar Loader Max. Material Length/Diameter: 1600 mm/5-65 mm • Magazine Short Bar Feed with Servo Drive • Main and Counter Spindle with Power Chuck D = 250 • Enclosed Work Area Enclosure According to Accident Prevention Regulations • Memory Card Input Socket, RS 232 Socket • Tool Load Monitoring, Bed Flushing • Workpiece Air Blow-off Function • Automatic Tool Measuring Probe // Driven Tools on Both Revolvers Machine Benefits Technical Machine Benefits • Chuck size (both spindles): 250 mm • Chuck force (both spindles): hydraulic 5-40 bar • Max. Turning diameter: approx. 390 mm / approx. 315 mm • Max. Workpiece length: 740 mm • Max. Bar diameter: 65 mm • Total power requirement: 75 kva / 11 kw with transformer • Regular maintenance has been performed Extra Information Additional equipment Coolant System, Chip Conveyor, Automatic Parts Catcher with Conveyor Belt, Many Accessories Technical Documents and Installation Plan Available Tools Tool Turret: BTM65 Live Tools: Yes Tool Load Monitoring: Yes Tool Holder Diameter: 40 mm Motor for Live Tools: 7.5 kW Collet Size for Rotary Tools: ER32 (D=3-20 mm) Max. Rotary Tool Speed: 4000 rpm Dimensions Machine Depth 4100 mm

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation Ljdpfoxlkq Ujx Abnjhd - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: used, DAEWOO DOOSAN D40S TRIPLEX - DIESEL All-Terrain Forklift ∗Very good overall condition, always stored indoors∗ Ledpfxoyutk Ro Abnehd ∗Fitted with all fork positioners∗ ∗All-terrain capable∗ ∗Minimal electronics∗ ● Enclosed cab (doors and rear made from transparent tarpaulin) ● Engine power: 58 kW / 79 HP ● Fuel: Diesel ● 2-speed automatic / torque converter transmission ● Unladen weight: 4,200 kg ● Rated capacity: 4,500 kg (at 500mm load center) ● Lifting height: 5,600 mm ● TRIPLEX mast with sideshift and fork positioner ● Fork length: 1,200 mm ● Dual front work lights ● Rear lighting ● Pre-installed for rotating beacon ● Pre-installed for towing hitch ● Front tires: 8.25 - R15 / tire tread in good condition! ● Rear tires: 250/75 R12 solid rubber tires / tread in very good condition! - UVV inspection and maintenance: NEW! Errors and prior sale excepted! = More Information = Contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: good (used), Year of construction: 2005, operating hours: 24,000 h, functionality: fully functional, travel distance X-axis: 520 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Fanuc, controller model: 21i, table load: 150 kg, spindle speed (min.): 10,000 rpm, spindle nose: ISO 30, number of slots in tool magazine: 14, Equipment: chip conveyor, TEHNICAL DATA : X- axis travel: 520 mm Y- axis travel: 320 mm Z- axis travel: 350 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 48 m/min Spindle nose- table distance: 150 ~ 470 mm Pallet size: 2 - 650 x 355 mm Pallet change time: 4s Table loading capacity: 2 x 150kg Max. spindle speed: 10.000 rpm/min Tool taper : ISO 30 Spindle power : 7.5kW Max. spindle torque: 49Nm Height: 2.430mm Length: 1.700mm Width: 2.900mm Weight: 5.000kg Lhjdeyk Sk Ujpfx Abnjd Additional options : Chip conveyor 4th axis preparation Pneumatic fixture preparation Workspace flushing with coolant

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Lhsdpfxoyi Abhs Abnjd

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, Vertical machining center with 3 axes with rotopallet DAEWOO ACE VC500 FANUC 18-M Accessories: Chip conveyor belt Lhsdega Edxopfx Abned High pressure cooling system 10 bar through the spindle line No. 2 rotary tables Comand TGV 200

Condition: used, Year of construction: 1996, Technical details: pressure: 300 t chamfer lenght: 6000 mm control: Delem DA 24e distance between columns: 2x5100 mm throat: 645 mm dayligth: 520 mm plate thickness: 5 mm total power requirement: ca. 10,0 je machine kW weight of the machine ca.: ges. ca. 66 t dimensions of machine: L:12,0xB:2,3xH:3,65 m Hydr. Pressbrake 6000-300 - jib arm length= 720mm - incl. back gauge (without crowning system) adjustment travel horizontal/vertical: 680/200mm motoric Optionally, two of these press brakes can be offered - also applicable as a Tandem Pressbrake with 2x 6 meter with 300t, with table size: W:165xL.12000mm, - program sequence via both presse(synchronized) and single available Optional are tools available! Lhjdpeu Ib Drefx Abnsd Copy of documentation available i.D. *

Condition: used, Year of construction: 2002, DAEWO machining center Lsdpfx Aoupkilebnshd ACE-VC 320

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, DOOSAN VC3600 YEAR 2018 TWIN PALLET 3 AXIS 20 TOOLS BT40 12K SPINDLE 22 KW SPINDLE THROUGH SPINDLE COOLANT Lhjdpfow Tangjx Abnod X TRAVEL 520 MM Y TRAVEL 360 MM Z TRAVEL 465 MM MACHINE CAN BE VIEWED RUNNING VIA APP FOR VIEWING PLEASE CONTACT ME AT THE OFFICE OR IF YOU WANT A WALK ROUND VIDEO LEAVE YOUR MOBILE WITH LYNDSAY IN THE OFFICE

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Lsdpjtzgaqofx Abnjhd Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,260 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HEIDENHAIN, table width: 700 mm, table length: 1,400 mm, table load: 1,200 kg, rotational speed (max.): 6,000 rpm, Heidenhain TNC 426 CNC Longitudinal travel X: 1.260 mm Lsdpow E Nl Hofx Abnjhd Transverse travel Y: 650 mm Vertical travel Z: 560 mm Table length: 1.400 mm Table width: 700 mm Maximum table weight: 1.200 kg Tool magazine: 30 tools Spindle mount: ISO 50 Maximum rotation speed: 6.000 rpm Machine complete with: • Remote electronic handwheel • Instruction manuals and CE declaration

Condition: used, - “DAEWOO” ACE V50P vertical machining center – Pallet changer – 30 stations for tools on chain – availability of over 40 tools/tool ​​holders, some of which are reamers with micrometric adjustment and 3 tool holders with tank for lubricant/coolant liquid - CNC Fanuc - machine still installed in the workshop, operational until 2021 - availability for any test - use and maintenance book - Price and detailed technical characteristics on request - Lhjdonr R A Iopfx Abnsd

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Lodpfx Abjxr N U Esnehd Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg Lsdpfsyuxm Dox Abnshd - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: PM301222, turning length: 648 mm, turning diameter: 400 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 282 mm, travel distance Z-axis: 1,330 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,000 mm, total length: 5,000 mm, total width: 2,200 mm, quill travel distance: 100 mm, quill diameter: 100 mm, overall weight: 5,000 kg, spindle nose: A2-8, bar diameter (max.): 77 mm, controller manufacturer: FANUC, controller model: SERIES 18i-T, Equipment: chip conveyor, documentation/manual, DAEWOO PUMA 300 B CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 10.499 A - Connection: 40.01 kVA - Swing diameter over bed: 570 mm - Swing diameter over carriage: 370 mm - Recommended machining diameter: 255 mm - Max. machining diameter: 400 mm - Max. working length: 648 mm - Bar capacity: 77 mm - Chuck diameter: 255 mm - Front spindle bearing diameter: 130 mm The machine is equipped with a tailstock, a 10-station turret, as well as a three-jaw chuck from SMW AUTOBLOK, diameter: 260 mm, and a chip conveyor. Attention: The item must be collected on a binding date, to be arranged, between 12.05. and 22.05.2026. Lhjdpfxjyvru Ss Abned FCA D-74821 Mosbach – loaded onto truck.