Used Daewoo Solar 160W-V for sale (54)

Year of construction: 1996, condition: good (used), functionality: fully functional, 2 Buckets, 1 7 finger grapple Dwsdo Aglzkopfx Ap Ajd Good working order Chains and sprockets 60%

Condition: used, Year of construction: 2002, feed length Y-axis: 1,200 mm, feed length Z-axis: 900 mm, Make: Daewoo-Doosan Model: PUMA V-1200M Category: Vertical CNC Turning Center Year of manufacture: 2002 CNC Control: FANUC Series 18-T Machine weight: 23,000 kg Machine dimensions Length: 8,500 mm Width: 4,900 mm Height: 5,650 mm Capacities Maximum turning diameter: Ø 1,600 mm Maximum machining diameter: Ø 1,600 mm Dodpfx Aoziavnep Aswd Maximum machining height: 1,200 mm Maximum load on spindle: 6,000 kg Main spindle Chuck diameter: Ø 1,200 mm Spindle speed: 2 ÷ 320 rpm Number of ranges: 2 Motor power: 37/45 kW (continuous / 30 min) Powered spindle (RAM) Tool holder: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 × 240 mm Travels X-axis: 1,200 mm Z-axis: 900 mm C-axis: 360° (minimum resolution 0.001°) Feed rates Rapid traverse X/Z axes: 10,000 mm/min Working feed rate X/Z: 3,000 mm/min Turret Number of stations: 16 Tool holders: BT-50 Drawbar type: 403 P50T-I Maximum tool diameter: Ø 400 mm Maximum tool length: 450 mm Maximum tool weight: 50 kg Maximum tool weight in the magazine: 600 kg Accessories Chip conveyor Coolant tank with washing pumps Spindle line cooler Powered and fixed tool holders Manuals, electrical diagrams, and CE Declaration.

Condition: good (used), Year of construction: 2002, machine/vehicle number: AV4C0039, functionality: fully functional, operating hours: 50,000 h, input voltage: 400 V, travel distance X-axis: 570 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 570 mm, number of slots in tool magazine: 32, overall weight: 7,600 kg, coolant supply: 15 bar, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, nominal power (apparent): 40 kVA, number of spindles: 1, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 32 m/min, rotary table diameter: 712 mm, spindle nose: DIN ISO40, spindle speed (max.): 8,000 rpm, table load: 300 kg, operating hours of spindle: 50,000 h, Equipment: documentation/manual, rotational speed infinitely variable, General Information • Manufacturer: DAEWOO • Model: ACE VC400 • Year of Manufacture: 2002 • CNC Control: FANUC 18M • Machine Type: Vertical CNC Machining Center with Twin Pallet System • Condition: Good working condition Technical Specifications Travels • X-Axis Travel: 560 mm • Y-Axis Travel: 400 mm • Z-Axis Travel: 510 mm Pallet System • Twin Pallet Changer (2 Pallets) • Pallet Size: 650 × 450 mm • Maximum Pallet Load: 300 kg Spindle • Spindle Taper: BT40 • Maximum Spindle Speed: 8,000 rpm • Main Drive Power: 11 kW Tool Changer • Automatic Tool Changer (ATC) • Tool Capacity: 30 Positions Equipment Included • FANUC 18M CNC Control • Twin Pallet Changer • Hydraulic Clamping System • Röhm Hydraulic Vises • Automatic Tool Changer • Coolant System • Central Lubrication System • Chip Conveyor • Electronic Handwheel (MPG) • Fully Enclosed Working Area Machine Condition The machine is in good working condition and has been used continuously in single-shift production. It is fully operational and can be inspected and tested under power. The machine is currently in production and demonstrates reliable performance in daily machining operations. Regular maintenance has been carried out throughout its service life. Advantages • Proven and reliable FANUC control system • Twin pallet system for increased productivity • Hydraulic clamping system with Röhm vises included • Suitable for milling, drilling and tapping operations • Ideal for steel, aluminum and cast iron machining • Immediate demonstration possible under power Dedpfsvt Sgqex Ap Ajwd Availability The machine is available for inspection by appointment. Live machining demonstration and operational testing under power can be arranged for serious buyers. Additional photos, videos and technical information are available upon request.

Condition: used, Year of construction: 2002, DAEWO machining center Djdpjupkiljfx Ap Aewd ACE-VC 320

Condition: used, Year of construction: 2001, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 850 mm, DAEWOO ACE V - 850 MACHINING CENTER CNC FANUC 18 - M Dwjdpfeyup T Ujx Ap Ajd TABLE SIZE: 2,000 mm x 800 mm TRAVEL: X: 2,000 mm Y: 820 mm Z: 850 mm DISTANCE SPINDLE NOSE - TABLE SURFACE: 200 - 1,030 mm SPINDLE SPEED: 6,000 RPM MAXIMUM PERMISSIBLE TABLE LOAD: 3,000 kg TOOL MAGAZINE CAPACITY: 40 positions TAPER: ISO 50 DIN 69871 CHIP CONVEYOR MACHINE COMPLETE WITH ALL DOCUMENTATION YEAR OF FIRST INSTALLATION: 2001 MACHINE IS IN EXCELLENT CONDITION

Condition: used, CNC Vertical Lathes (2) DOOSAN V400 Dwodpfx Aps Ad Hbdo Asd - CNC Control Model: Fanuc i-series - Spindle Nose: ASA 8 - Max. Turning Diameter: 500 mm - Max. Turning Length: 450 mm - Main Spindle Speed: 3,000 RPM - First Turret Tool Stations: 12 - X-Axis Travel: 265 mm - Z-Axis Travel: 490 mm The machines can be inspected under power at our warehouse in Gussago (BS), Italy. Mimu Macchine Utensili

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Djdpjtzgaqefx Ap Ajwd Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, 3-axis vertical machining center with rotary pallet DAEWOO ACE VC500 FANUC 18-M Accessories: Chip conveyor with belt High-pressure cooling system (10 bar) through the spindle line Dodpoga Edxefx Ap Ajwd No. 2 rotary tables, Comand TGV 200

Condition: used, Year of construction: 2001, CNC FANUC 18i M X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM SPINDLE SPEED 6000 RPM Dwodpfxokx E Tbe Ap Ajd SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: new, Year of construction: 2022, Daewoo, DAFL50A, 2022, scrub machine, brand: Daewoo; type: DAFL50A; year: 2022; NEW, NEVER USED, working width: 850 mm; electric: yes; hours on display: 0 hr; battery charger: yes; electric connection: 220 V; own weight: 160 kg; total dimension L: 1100 mm; total dimension Dsdpfxoh Nuy As Ap Aowd W: 540 mm; total dimension H: 1020 mm; description: internal charger, unused, works on battery, batteries included; LOCATED IN POLAND

Condition: used, New diesel generator set, power generator, emergency power generator RTE Type 50kVA - identical to DAEWOO DAGFS 50 New, unused Year of manufacture 2026 Rated power 50 kVA Continuous power max. 40 kVA Dwedpfx Ape Ah Ifis Asd Standby power 55 kVA / 44 kW Rated current 33 amps Voltage 400/230 volts, 50 Hz 230 volts, 50 Hz Fuel consumption 99-liter tank capacity for an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load approx. 11 liters/hour Fuel consumption in standby mode approx. 4 liters/hour Drive engine 4-cylinder diesel in-line engine RICARDO ZH4105ZD Engine power at 1500 rpm 45 kW Engine power at 1800 rpm 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal housing - Forklift pockets for easy and safe transport by forklift - 3x CEE-16 amp socket (3-pole, 230 volts) - 1x CEE 16 amp socket (5-pole, 400 volts) - Terminals for cable power connection for external consumers, e.g., construction site power distribution - ATS module for network replacement operation, for automatic emergency power switchover in case of power failure Space requirement L x W x H 2150 x 950 x 1200 mm Weight 900 kg New machine from stock

Condition: new, Year of construction: 2022, Available in multiple units! Brand: Daewoo Model: DDAE10500DSE-3G Dsdpfxjiv Hf Ns Ap Aowd Year of manufacture: 2022, New Capacity (kVA): 8.1 kVA (230V) / 7.5 kVA (400V) Engine brand: Daewoo Engine model: 500 Engine capacity (kW): 15 hp Fuel: Diesel Voltage: 230-400 Frequency (Hz): 50 Dimensions L x W x H (mm): 880 x 560 x 720 Weight (kg) approx.: 165 Quantity in stock: 100+ Comments: Max power: 8.1 kVA (400 V) / 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) / 6.7 kVA (230 V) Engine power: 15 hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time at 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7m: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Condition: used, Year of construction: 2006, MAKE DAEWOO DOOSAN, MADE IN KOREA MODEL MYNX SERIES NM 410 YEAR 2006 CONTROL FANUC 0iMC TABLE SIZE 920.0 x 430.0mm TRAVERSES (X, Y, Z axes) 762.0 x 410.0 x 510.0mm SPINDLE SPEED Upto 8,000rpm SPINDLE SIZE BT 40 ATC 20 stations SPINDLE POWER 11.0Kw/15.0HP MAX. TABLE LOAD 600.0kgs MACHINE DIMENSIONS 2200.0 x 2600.0 x 2600.0 mm MACHINE WEIGHT 5000kgs PLUS SIDE ARM TOOL CHANGER COOLANT SYSTEM SET OF MANUALS Dsdpj Ah Td Sofx Ap Aowd

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 3,504 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, drive type: Diesel, Diesel forklift Dwedo Agdkmspfx Ap Aed Load center: 500 Mast type: Duplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Description: Side shifter, 3rd valve, front work light, roof protection

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter Dodsidabkopfx Ap Aowd weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Djdsx Ad Nljpfx Ap Aewd Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Year of manufacture: 2005 Colour: Grey Operating hours: 10.690 Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm Dodpsyuxm Dofx Ap Ajwd - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Manuel Yousif

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Dodsyi Abhspfx Ap Aowd

Condition: good (used), Year of construction: 2004, Daewoo Puma 2000 LSY lathe Year of manufacture: 2004 CNC control: FANUC 18i-TB Maximum diameter over the bed: 600 mm Maximum turning diameter: 330 mm Maximum turning length: approx. 510 mm Travel of axis X: 250 mm Travel of axis Z: 780 mm Travel of axis Y: ±50 mm Travel of the counter-spindle: approx. 780 mm Bar diameter: 65 mm Spindle speed of the main spindle: up to 4,500 rpm Power of the main spindle: approx. 15–18.5 kW Spindle speed of the counter-spindle: up to 6,000 rpm Power of the counter-spindle: approx. 7.5 kW Number of tools in the turret: 12 positions Dweds Ad U Hujpfx Ap Asd Speed of driven tools: up to 5,000–6,000 rpm Power of driven tools: approx. 3.7–5.5 kW Chip tray (no chip conveyor) Weight: approx. 5,350 kg Tools Documentation

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Dodpfoxxlmwex Ap Aewd Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, functionality: fully functional, operating hours: 12,953 h, load capacity: 7,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,350 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Dwsdpfx Apoz S Sr Eo Ajd Rear tire type: Pneumatic Side shifter, fork positioner 3rd valve, 4th valve, windshield, full cabin, interior mirror, windshield wiper

Condition: used, Year of construction: 2004, turning diameter 320 mm turning length 305 mm Dodpfxoz Icz Uo Ap Aewd control Fanuc weight of the machine ca. 3500 kg

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm Dwedpfx Apsyuqace Aed BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Dwjdpfx Apsvcf Rnj Asd Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: good (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, DAEWOO ACE-H500 For sale Daewoo ACE-H500 horizontal machining center, a heavy-duty and reliable HMC designed for high-precision and high-productivity machining. The ACE-H500 is well known for its rigid construction, powerful spindle, and long service life, making it an excellent choice for subcontracting and industrial production. Daewoo (now DN Solutions) machines are highly regarded worldwide for durability, accuracy, and ease of maintenance. Technical specifications: Pallet size: 500 × 500 mm Number of pallets: 6 Max. workpiece size. Ø800 × 1000 mm Max. workpiece weight. 800 kg Dsdpjx Htawefx Ap Aswd X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 650 mm Spindle taper: BT50 Max. spindle speed: 6000 rpm Spindle motor power: 12 kW Tool magazine capacity: 120 tools Tool change type: Automatic CNC control: FANUC Rapid traverse (X/Y/Z): 24 m/min Machine dimensions (L × W × H): approx. 4.5 × 2.8 × 3.0 m Machine weight: approx. 12,000 kg General: Rigid box-type construction for stable heavy cutting High torque spindle suitable for steel and cast iron Excellent accuracy and repeatability Ideal for series production and flexible manufacturing Proven platform with strong spare parts availability Test run possible by appointment. Ask for the price delivered. Verify the details with the seller.