Used Daewoo Solar 150Lc-V for sale (55)

Condition: used, Year of construction: 2002, feed length Y-axis: 1,200 mm, feed length Z-axis: 900 mm, Make: Daewoo-Doosan Model: PUMA V-1200M Category: Vertical CNC Turning Center Year of manufacture: 2002 CNC Control: FANUC Series 18-T Machine weight: 23,000 kg Machine dimensions Length: 8,500 mm Width: 4,900 mm Height: 5,650 mm Capacities Maximum turning diameter: Ø 1,600 mm Maximum machining diameter: Ø 1,600 mm Maximum machining height: 1,200 mm Maximum load on spindle: 6,000 kg Main spindle Chuck diameter: Ø 1,200 mm Spindle speed: 2 ÷ 320 rpm Number of ranges: 2 Motor power: 37/45 kW (continuous / 30 min) Powered spindle (RAM) Tool holder: ISO-50 Speed: 15 ÷ 1,500 rpm RAM section: 240 × 240 mm Travels X-axis: 1,200 mm Z-axis: 900 mm C-axis: 360° (minimum resolution 0.001°) Feed rates Rapid traverse X/Z axes: 10,000 mm/min Working feed rate X/Z: 3,000 mm/min Turret Pedpfx Amjziavnelogu Number of stations: 16 Tool holders: BT-50 Drawbar type: 403 P50T-I Maximum tool diameter: Ø 400 mm Maximum tool length: 450 mm Maximum tool weight: 50 kg Maximum tool weight in the magazine: 600 kg Accessories Chip conveyor Coolant tank with washing pumps Spindle line cooler Powered and fixed tool holders Manuals, electrical diagrams, and CE Declaration.

Condition: used, Year of construction: 2005, controller manufacturer: Fanuc, controller model: 21i-TB, _____ Description: Year of manuf. : 2005 Control : Fanuc 21i-TB Turning diam. : 730 mm Turning length : 750 mm In General: Year of manufacture:2005 Control system:Fanuc 21i-TB Max. speed:2,000 rpm Turning diameter:730 mm Turning height:750 mm X-axis:390 mm Z-axis:780 mm Chuck diameter:600 mm Tool turret:8 stations Equipment: Pgodsz Am Scopfx Amleu Chip removal:Chip conveyor Coolant supply:Coolant pump Tool measurement:Renishaw tool setter Chuck:SMW Autoblok 3-jaw chuck

Condition: used, Year of construction: 2001, controller manufacturer: Fanuc, controller model: 18i-T, _____ Description: Pedpfx Aoz Am R Semlegu Year of manuf. : 2001 Control : Fanuc 18i-T Turning diam. : 730 mm Turning length : 750 mm In General: Year of manufacture:2005 Control system:Fanuc 18i-T Max. speed:2,000 rpm Turning diameter:730 mm Turning height:750 mm X-axis:390 mm Z-axis:780 mm Chuck diameter:600 mm Tool turret:8 stations Equipment: Chip removal:Chip conveyor Coolant supply:Coolant pump Chuck:3-jaw chuck

Condition: used, Year of construction: 2002, DAEWO machining center Pedpsupkiljfx Amlogu ACE-VC 320

Condition: used, CNC Vertical Lathes (2) DOOSAN V400 - CNC Control Model: Fanuc i-series - Spindle Nose: ASA 8 - Max. Turning Diameter: 500 mm - Max. Turning Length: 450 mm - Main Spindle Speed: 3,000 RPM Pjdpfo Ad Hbdjx Amlegu - First Turret Tool Stations: 12 - X-Axis Travel: 265 mm - Z-Axis Travel: 490 mm The machines can be inspected under power at our warehouse in Gussago (BS), Italy. Mimu Macchine Utensili

Condition: used, Year of construction: 2001, travel distance X-axis: 2,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 850 mm, DAEWOO ACE V - 850 MACHINING CENTER CNC FANUC 18 - M TABLE SIZE: 2,000 mm x 800 mm TRAVEL: X: 2,000 mm Y: 820 mm Z: 850 mm DISTANCE SPINDLE NOSE - TABLE SURFACE: 200 - 1,030 mm Pjdsyup T Ujpfx Amlsgu SPINDLE SPEED: 6,000 RPM MAXIMUM PERMISSIBLE TABLE LOAD: 3,000 kg TOOL MAGAZINE CAPACITY: 40 positions TAPER: ISO 50 DIN 69871 CHIP CONVEYOR MACHINE COMPLETE WITH ALL DOCUMENTATION YEAR OF FIRST INSTALLATION: 2001 MACHINE IS IN EXCELLENT CONDITION

Condition: good (used), Year of construction: 2006, functionality: fully functional, QUICK SALE / FAST PURCHASE Daewoo Puma 2000SY lathe + LNS 1.5 m bar feeder. Year of manufacture: 2006 Numerical control: FANUC 18i-TB Maximum diameter over the bed: 600 mm Maximum turning diameter: 330 mm Maximum turning length: approx. 510 mm X-axis travel: 250 mm Z-axis travel: 580 mm Y-axis travel: ±50 mm Sub-spindle travel: approx. 580 mm Bar capacity: 65 mm Main spindle speed: up to 4,500 rpm Main spindle power: approx. 15–18.5 kW Sub-spindle speed: up to 6,000 rpm Sub-spindle power: approx. 7.5 kW Tool positions in turret: 12 Motorized tool speed: up to 5,000–6,000 rpm Pgjdpfo Ad Ic Aox Amlsu Motorized tool power: approx. 3.7–5.5 kW Approximate weight: 4,850 kg

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Pjdpfxjtzgaqe Amlegu Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 3,504 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Duplex Transmission: Torque converter Condition: Ready for operation and fully functional Technical condition: good Front tire type: Superelastic Rear tire type: Superelastic Description: Podpfx Ao Agdkmemlsgu Side shifter, 3rd valve, front work light, roof protection

Year of construction: 2000, condition: excellent (used), machine/vehicle number: AV5C0171, 3-axis vertical machining center with rotary pallet DAEWOO ACE VC500 FANUC 18-M Psdpfx Aega Edxsmlegu Accessories: Chip conveyor with belt High-pressure cooling system (10 bar) through the spindle line No. 2 rotary tables, Comand TGV 200

Condition: used, Year of construction: 2001, CNC FANUC 18i M X AXIS STROKE 2000 MM Y AXIS STROKE 850 MM Z AXIS STROKE 830 MM Pgedekx E Tbopfx Amlsu SPINDLE SPEED 6000 RPM SPINDLE TAPER ISO 50 DIN 69871 TABLE 2000 X 800 MM WORKPIECE LOAD 3000 KG RAPID FEED I X - Y - Z 12 MT/MIN COOLANT INTERNAL 5 BAR EXTERNAL HIGH PRESSURE 20 BAR ATC 40 PLACE 4 CNC AXIS ROTARY TABLE WITH TAILSTOCK CHIP CONVEYOR

Condition: new, Year of construction: 2022, Available in multiple units! Brand: Daewoo Model: DDAE10500DSE-3G Year of manufacture: 2022, New Capacity (kVA): 8.1 kVA (230V) / 7.5 kVA (400V) Engine brand: Daewoo Engine model: 500 Engine capacity (kW): 15 hp Fuel: Diesel Voltage: 230-400 Frequency (Hz): 50 Dimensions L x W x H (mm): 880 x 560 x 720 Weight (kg) approx.: 165 Quantity in stock: 100+ Pgjdpfsiv Hf Nex Amlsu Comments: Max power: 8.1 kVA (400 V) / 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) / 6.7 kVA (230 V) Engine power: 15 hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time at 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7m: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

Condition: good (used), Year of construction: 2004, Daewoo Puma 2000 LSY lathe Year of manufacture: 2004 CNC control: FANUC 18i-TB Maximum diameter over the bed: 600 mm Maximum turning diameter: 330 mm Maximum turning length: approx. 510 mm Travel of axis X: 250 mm Travel of axis Z: 780 mm Travel of axis Y: ±50 mm Travel of the counter-spindle: approx. 780 mm Bar diameter: 65 mm Spindle speed of the main spindle: up to 4,500 rpm Power of the main spindle: approx. 15–18.5 kW Spindle speed of the counter-spindle: up to 6,000 rpm Power of the counter-spindle: approx. 7.5 kW Number of tools in the turret: 12 positions Speed of driven tools: up to 5,000–6,000 rpm Pedpfxe Ad U Hus Amljgu Power of driven tools: approx. 3.7–5.5 kW Chip tray (no chip conveyor) Weight: approx. 5,350 kg Tools Documentation

Condition: new, Year of construction: 2022, Daewoo, DAFL50A, 2022, scrub machine, brand: Daewoo; type: Pgodsh Nuy Aspfx Amlsu DAFL50A; year: 2022; NEW, NEVER USED, working width: 850 mm; electric: yes; hours on display: 0 hr; battery charger: yes; electric connection: 220 V; own weight: 160 kg; total dimension L: 1100 mm; total dimension W: 540 mm; total dimension H: 1020 mm; description: internal charger, unused, works on battery, batteries included; LOCATED IN POLAND

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Pedpjidabkjfx Amljgu Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: used, New diesel generator set, power generator, emergency power generator RTE Type 50kVA - identical to DAEWOO DAGFS 50 New, unused Serial No. 6739 - FB2512886 - Year of manufacture 2026 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 Amps Voltage 400/230 Volts, 50 Hz 230 Volts, 50 Hz Fuel consumption 99-liter tank capacity for an operating time of up to 8.5 hours at 75% load Fuel consumption at 75% load approx. 11 liters/h Fuel consumption in standby mode approx. 4 liters/h Drive engine 4-cylinder diesel inline engine RICARDO ZH4105ZD Engine power at 1500 rpm 45 kW Engine power at 1800 rpm 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal housing - Forklift pockets for easy and safe transport - 3x CEE-16 Amp socket (3-pole, 230 Volt) - 1x CEE 16 Amp socket (5-pole, 400 Volt) - Terminals for cable power connection for external consumers, e.g. construction power distribution box - ATS module for grid replacement operation, for automatic emergency power switchover in case of power failure Space requirement L x W x H 2150 x 950 x 1200 mm Weight 900 kg Pjdpjz Ek R Sefx Amljgu New machine from stock

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Year of manufacture: 2005 Colour: Grey Operating hours: 10.690 Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Psdjyuxm Depfx Amlogu Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Pgodeyi Abhspfx Amleu

Condition: excellent (used), Year of construction: 2002, Daewoo Puma 230 MA Year of manufacture: 2002 C-axis Live tooling Tool setter Pgedpfx Amoz Tv N Rjleu Tailstock Chip conveyor Includes 200 mm hydraulic chuck

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Pgjdpsxxlmwofx Amlju Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Pjdpfx Amox Ad Nlologu Distance from spindle nose to table center: 150–1,000 mm Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: used, Year of construction: 2004, turning diameter 320 mm turning length 305 mm Podpfx Amez Icz Ujlegu control Fanuc weight of the machine ca. 3500 kg

Condition: used, functionality: fully functional, operating hours: 12,953 h, load capacity: 7,000 kg, lifting height: 6,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,350 mm, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Pgjdjz S Sr Espfx Amlju Side shifter, fork positioner 3rd valve, 4th valve, windshield, full cabin, interior mirror, windshield wiper

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Pgjdpfx Amevcf Rnolou Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED Pgedpfxoyuqace Amlju ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION