VERTICAL MACHINING CENTER

DAEWOO MYNX 500

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, controller manufacturer: FANUC, controller model: 21-M, overall weight: 7,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DAEWOO MYNX 500 was manufactured in 2000. It features an X-axis stroke of 1,020 mm, Y-axis stroke of 510 mm, and Z-axis stroke of 575 mm. The machine includes a table dimension of 1,200 x 500 mm and a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 500 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1,200 x 500 mm Additional equipment Csdpfx Ahezmgiioyjri • Chip conveyor Technical Specification Taper Size ISO 40

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Csdpfx Aoxmkcashyjri

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, table load: 800 kg, spindle speed (max.): 1,100 rpm, number of axes: 3, This 3-axis DAEWOO Mynx 500 was manufactured in 1999. It features an X-axis travel of 1020 mm, Y-axis travel of 510 mm, and Z-axis travel of 575 mm. The machine includes a T-slotted table size of 1200 mm x 500 mm and a maximum table load capacity of 800 kg. If you are looking to get high-quality machining capabilities, consider the DAEWOO Mynx 500 vertical machining centre we have for sale. Contact us for further details. • CE Marked: Yes • Part Counter: 2,430 • Cycle Time: 0 h 3 min 14 s Codpfjzhb I Nsx Ahysri • Current Active Tool: T0006 • Table Type: T-Slotted • Table Size: Typically 1200 mm × 500 mm

Condition: used, Year of construction: 2001, Vertical machining center Daewoo MYNX 500 Control type: Heidenhain 426 Table dimensions: 1200 mm x 500 mm Travel: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 625 mm Tool magazine: 30 positions Spindle speed: 80-8000 rpm Through-tool coolant / high pressure Tool taper: ISO 40 mm Motor power: 12/16 kW Rapid traverse: 24 m/min Handwheel control Brand new automatic chip conveyor by LNS Year of installation: 2001 Credpfxeypakms Ahyei CE Weight: 7,500 kg Complete with all documentation

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe ZERBST - DPS 1400 MACH-ID 582 Cedjwvirhspfx Ahyori Make: ZERBST Type: DPS 1400 Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Spindle bore: 100mm

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: Fanuc 21T range of revolution per miute: 20 - 6300 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 kW electrics - voltage/frequency: 400 / 50- 60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x 1,62 m Crsdpfxsy Emfwe Ahyji The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Various accessories *

Condition: used, Year of construction: 2010, Equipment: all wheel drive, Internal vehicle number: T028 Available immediately at our yard in Kaufungen. Cjdpfx Ahezpcxfeysri More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: Manitowoc Lifting moment: 1230 kNm Capacity: 45 tons at a reach of 2.5 m Lifting capacity: 35 t at a reach of 3 m Maximum lifting moment: 125 kNm Reach: 34 m MAX. reach: 47 m 360-degree rotation Combined engine for driving and crane operation: HINO E 13 C, 6 cylinders, Euro engine III A, 330 kW at 1,800 rpm Torque: 1,930 Nm at 1,300 rpm Operating hours: approx. 5,900 Financing example: * Internal number: T028 * Purchase price: €109,900.00 * Down payment: 10% * Term: 60 * Monthly payment: €1,700.49 * Residual value: €22,000.00 If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: FANUC 21T revolution per minute: 50 - 3000 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 KW kW electrics - voltage/frequency: 400 / 50 -60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x1,62 m Credey Emfqepfx Ahyei The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Various accessories *