Used Belflex Bf100H Sc for sale (8,230)

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Dsdpfx Adowvv Rqogsci Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 200 t, table width: 2,000 mm, table length: 1,000 mm, total length: 1,900 mm, total width: 3,400 mm, total height: 4,600 mm, overall weight: 26,000 kg, die cushion stroke: 300 mm, with 60-ton draw cushion Herblitz feed: Max. material width: 550 mm Max. material thickness: 6 mm Siemens control SPS7, 1500F Dcedpfsyv A Ipex Adgoi

Condition: good (used), Year of construction: 1995, Format: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Cover format: max 642 mm; min 203 mm Output: max 12,000 c/h Equipment Gathering machine - 15 stations - 15 feeders 201 S Dsdpfx Adjquuxbsgjci - Vibrating element 3642 Perfect binder - 23 Tongs - Pincer pitch 24" - Vibrating station - Milling and roughening station - Hotmelt back gluing unit - Hotmelt side gluing unit - 2 premelters - Shingled cover feeder - 2nd SF cover pressing - Laydown device

Year of construction: 2010, condition: used, Stream delivery Djdpoc Nd Dbsfx Adgjci Built in 2010

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, RBO Portal Feeding System Advantage SC, Year 2006 The machine offered is being sold as a second-hand unit. The sale is made to the exclusion of any liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller provides no guarantee regarding functionality, performance, or suitability for any specific purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages resulting from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine is to be carried out by the buyer at their own responsibility and expense. The buyer bears all costs and risks associated with dismantling, loading, and transport. Dodjywfi Sjpfx Adgeci Transfer of Risk The risk passes to the buyer no later than at the start of dismantling or loading. Miscellaneous No liability is assumed for hidden defects. All information about the machine (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge, but without guarantee.

Condition: excellent (used), workpiece weight (max.): 18,000 kg, turning diameter: 3,300 mm, VERTICAL LATHE TITAN SC 32 (SAMU) – 2 RAMS Dedpfxjyyp Spj Adgjci TABLE DIAMETER: 3000 mm TURNING DIAMETER: 3300 mm MAX. ADMISSIBLE WEIGHT: 18 t RAM SECTION: 250 x 250 mm RAM STROKE: 1200 mm MAX. ADMISSIBLE HEIGHT: 2300 mm SPINDLE MOTOR POWER: 60 kW 02 TOOL CHANGERS WITH 12 POSITIONS EACH CNC: SIEMENS 840 D

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 2300 mm Cutting width at rip fence: 900 mm Cutting width at crosscut fence: 2310 mm Cutting depth: 100 mm Scorer: no Saw blade swivel range: +45° Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Dedpsxrbh Defx Adgeci Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Scorer adjustment: manual Saw blade diameter: 310 mm Speeds: 3500 rpm Motor power: 5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2200 mm Weight: 380 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 S PVC KALIPSIZ MODEL (MOLDLESS) CAM ÇITASI KESME MAKİNASI, • Complies with CE standards. • 45-degree cutting of PVC beading profiles performed with 4 saws. • Adjustable for 12 different beading cut types. • Ability to cut 2 beadings simultaneously. • 2.5-meter right/left conveyor system for long beadings. • Beading claw adjustment mechanism. • Pneumatic clamping system. • Optionally equipped with diamond-tipped saw for aluminum beading cutting (with cooling system). • Air gun. • Adjustable cutting speed. • Compatible with digital meter connection. • Operable with Bluetooth measuring station. Dcjdpfx Adsq U Tbregji

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 301 PVC CAM Çıtası KESME MAKİNESİ, • Conforms to CE standards. • 45-degree cutting capability for PVC glazing bead profiles. • Automatic operating system. • 2.5-meter conveyor system for long frames. • Adjustable cutting speed. • Pneumatic profile clamping system. • Saw blade diameter Ø200 millimeters. OPTIONS • Left conveyor attachment capability. • Notching saw. • Connectivity for digital meter. • Capability to connect a Bluetooth measuring station. Dcodpfoq U Tbksx Adgei

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 90 mm, saw blade diameter: 400 mm, height adjustment type: electric, rotational speed (max.): 5,000 rpm, overall weight: 1,810 kg, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,250 mm, extraction nozzle diameter: 100 mm, slide length: 3,200 mm, warranty duration: 12 months, Equipment: motor brake, SC-400/3200 Top. Machine with good quality and solid construction. A machine that meets your expectations. Stroke length 3200 mm, saw blade 400 mm, scoring blade. The machine is available in several different models and different sizes. Very affordable machine. Dodpfjwizxaex Adgjci

Condition: used, Year of construction: 2000, functionality: fully functional, Tunnel originally supplied by Nodema to the customer from whom we took it back in exchange. Inspected by Nodema. Djdpfjylnr Dsx Adgoci

Condition: reconditioned (used), Year of construction: 1996, Completely reconditioned BVM shrink tunnel. Dcodpfxjuihczs Adgei

Condition: good (used), Year of construction: 1991, Fladder SC 300 / 1000 Finishing and Brushing Machine Year of manufacture: 1991 Manufacturer: Fladder System Denmark Serial number: 560 Machine height: 2210 mm Machine width incl. carousel: 4000 mm Machine length incl. carousel: 4500 mm Working height carousel: 800 mm Working width: 1200 mm Max. workpiece height: 100 mm Feed speed: 0.3 - 10.0 m/min lock-itTM spindles and length: 6 x Ø100 x 350 mm Voltage: 3 x 400/500V - 50/60Hz Max./Min. fuse rating: 32 A Dcedokwcxyopfx Adgji Max. power consumption: 15 kW Extraction rate: 2500 m3/h Net weight: 1700 kg

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: Cordes sc-270.004, Lot of 450 units Furniture Transport Trolley L-Frame – Nestable and Stackable This furniture transport trolley with L-frame is a robust and space-saving solution for internal transport of furniture and large, bulky goods. Thanks to its sturdy construction and high load capacity, this transport trolley is ideal for intensive use in warehouses, distribution centers, and retail environments. Dedpfjyhp Acsx Adgsci The frame is made of durable, coated steel and features a strong particle board base. The trolley has a maximum load capacity of 600 kg and offers ample space for safely moving long and heavy items. Due to its smart L-frame design, the trolley is both nestable and stackable, significantly saving storage space when the trolleys are not in use. The furniture transport trolley is equipped with four swivel nylon castors with a diameter of 100 mm, at least one of which is fitted with a locking brake. This ensures smooth and stable movement, even when fully loaded. The nylon wheels are wear-resistant and suitable for various floor types. With external dimensions of 2500 x 1150 x 1800 mm and internal dimensions of 2380 x 1100 x 1610 mm, this transport trolley offers a generous capacity of approximately 4,214 liters. The unladen weight is approximately 114.5 kg, which adds to its stability during use. This furniture transport trolley combines strength, flexibility, and efficient space usage, making it a reliable choice for professional internal logistics. Cordes SC-270.004 600 kg load capacity Stackable up to 3 trolleys high 4x swivel castors, at least 2x with brake

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 661 h, Trench roller No. 4 Wacker Neuson RT 82 SC 2, built in 2012, 661 operating hours, weight 1490 kg, Kohler diesel 15.5 KW, serial no. 20140613, radio control + cable, functional Djdov I T E Ropfx Adgoci

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 781 h, Trench roller No. 2 Wacker Neuson RT 82 SC 2, year of manufacture 2011, 781 operating hours, weight 1,490 kg, Kohler diesel 15.5 kW, serial no. 20032212, remote control (radio + cable), fully functional. Djdsybag Ejpfx Adgeci

Condition: used, machine/vehicle number: 005693, Max. panel width: 1200 mm Max. panel length: 3200 mm Max. panel stack height from the ground: 1600 mm Dcedpfsyhbfpsx Adgji Lifting capacity: 100 Kg Work capacity: 16 Cycles/min Movement system: suction cups.

Condition: excellent (used), Weiss SC 1000/+20IU Corrosion Climatic Cycle Test Chamber Weiss SC 1000/+20 JU Corrosion Climatic Cycle Test Chamber The test system is a combination of a climatic test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. At-risk metallic components are tested for corrosion in a time-lapse manner according to the relevant standards. Temperature Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Climatic Working Range Temperature: +20 °C ... +60 °C Temperature variation over time: +0.5 °C Relative Humidity: 10...98 % RH Temperature variation over time: 3...5 % RH Dew point: +12 °C ... +59 °C Salt spray test SS (ambient temperature range +5 °C ... +50 °C) according to DIN 50 021 (salt spray via dual-fluid nozzle, 1.5 x 0.5 mV 80 cm h) Control Digital measurement and control system SIMCON/32*-Net with touchscreen control panel Interfaces - Serial interface RS 232 C - Parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Air conditioning mode - Salt spray test - Direct spraying with saline solution - Condensate load - Flushing test chamber walls - Drying/ventilating test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: Psychrome fresh measuring device TFT (with forced humidification) Technical data SC 1000/+20 JU Usable space dimensions Height up to sloped roof approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test room door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including unit components and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch control panel approx. 1700 mm Depth approx. 2600 mm Floor load max. 100 kg Brine storage tank approx. 200 l, with level monitoring separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Dcjdpjph U Dhefx Adgei Power rating: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Dcodpoya Da Hjfx Adgei Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Condition: used, System: Decanter, used Type: KHD SC 4-0.2 Year of manufacture: 1993 Machine number: 5311 Max. drum speed: 2500 rpm Max. operating speed: 2500 rpm Dodpfevz R Ehsx Adgeci Drum inner diameter: 758 mm Drum wall thickness: 20 mm Drum material: 1.7218 Filling volume: 715 dm3 Total weight: 13,500 kg Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 390 h, Trench roller No. 3 Wacker Neuson RT 82 SC 3, year of manufacture 2017, 390 operating hours, weight 1495 kg, Kohler diesel engine 14.8 kW, serial no. 24386997, remote control + cable, fully functional, with extensions. Dcsdpfx Ajym N N Hedgei

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 3,300 mm, turning diameter: 3,300 mm, spindle speed (max.): 92 rpm, spindle speed (min.): 92 rpm, travel distance X-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, spindle motor power: 60,000 W, rapid traverse Z-axis: 6 m/min, rotational speed (min.): 92 rpm, rotational speed (max.): 92 rpm, total height: 2,330 mm, total width: 6,282 mm, feed length Z-axis: 1,200 mm, workpiece weight (max.): 35,000 kg, overall weight: 50,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC vertical lathe SC 33 CNC MS Year of manufacture: 1995 Condition: used, fully functional Technical specifications: Maximum turning diameter: 3300 mm Maximum workpiece height: 2300 mm Dcodpjyzgtmsfx Adgsi CNC control system Condition: functional, live Video available on request. *The machine is in very good condition, fully functional, live and available for inspection and testing.

Condition: reconditioned (used), Connected load 380V 5.5kW Roller diameter 900 mm Machine height 2950 mm Dsdpfox Ezqbjx Adgsci Machine table 1310 x 1020 mm Stop

Year of construction: 2013, condition: ready for operation (used), Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible. Dcjdpfx Asyk Hcrjdgji

Condition: ready for operation (used), Year of construction: 2015, Connected load: 160kVA, length: 8328mm, width: 2768mm, height: 3665mm, weight: 9.5t, with documentation. Dcedpfx Aolnmv Dodgsi