Used Belflex Bf712 Sc for sale (69,819)

Condition: reconditioned (used), Year of construction: 2018, Operating hours: 794 h, Nilfisk SC 2000 EcoFlex Workshop overhauled scrubber dryer with 3 months warranty and new DGUV V3 test including test report. Working width without squeegee: 53 cm Working width with squeegee: 72 cm Max. area coverage: 3180 sqm/h Fresh water tank: 70 L Protective water tank: 70 L Traction drive: Yes E32Ginru Drive type: Electric 24V Battery: 2 x 12 V 105 Ah GEL battery New parts installed / repairs carried out: - Suction motor 24V 600W new - Drain hose new - New fresh water hose - Disc brushes new - Suction lips new - Dirt filter new We also offer: Service, repair and sales for all current Hako models.

Year of construction: 2014, Condition: used, General information Mileage: 976.365 km Colour: Blue Cab: Space Cab, sleep Ultpvbtlpf Technical information Power: 321 kW (436 HP) Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Axle configuration: 6x2 Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Tyre size: 275 / 70 / R17.5; Lift axle; Max. axle load: 4400 kg; Tyre profile left: 25%; Tyre profile right: 25%; Suspension: air suspension Rear axle 2: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Measures Dimensions (LxBxH): 641 x 255 x 400 cm Wheelbase: 405 cm Weights Empty weight: 11.865 kg Carrying capacity: 13.035 kg GVW: 24.900 kg Functional Crane: Hiab X-Hipro 192 E-4, year of manufacture 2014, behind the cab Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6 Maintenance APK (MOT): tested until 02/2025 History Service history: Present Condition General condition: good Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters)

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Crhj7Tgaf3 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Axe configuration: 3 axles, Wheelbase: 9,090 mm, Loading space length: 13,330 mm, Loading space width: 2,500 mm, Loading space height: 2,600 mm, First registration: 10/2007, Suspension: air, Tire size: 385 55 R 22,5, Year of construction: 2007, Condition: used, Equipment: Abs, Tail-Lift, General information Colour: Unknown Registration number: OJ-10-ZY Axle configuration Tyre size: 385 55 R 22,5 Brakes: disc brakes Rear axle 1: Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Rear axle 2: Lift axle; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Rear axle 3: Steering; Tyre profile left: 30%; Tyre profile right: 30% Measures Dimensions (LxW): 1400 x 260 cm Weights Cccle3S Empty weight: 9.800 kg Carrying capacity: 32.200 kg GVW: 42.000 kg Functional Tail lift: Hollandia, 3000 kg Condition General condition: good Visual appearance: good Other information Cargo space outer length: cm Cargo space outer width: cm Cargo space outer height: cm Additional information Please contact Rob Veldhuis or Arjan Kamsteeg for more information

Year of construction: 2014, Condition: excellent (used), Model: ET 94/SC Serial number: SN006968 Year of manufacture: 2014 Number of levels: 4 Number of doors: 1 Interior dimensions (WxD): 920x1300 mm Oven dimensions (WxDxH): 1440x2010x2720 mm Oven height + extractor: 2300 + 420 mm Cooking surface: 4.80 m² Power: 20.04 kW Voltage: 400 V - 50 Hz Weight: 2000 kg Bstwrhbt9O Revised equipment: The equipment is prepared when ordered, and the handling and return times are agreed upon at that moment.

Color: other, Condition: used, New: No 2Eqfmfgxq Empty weight: 3 kg Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: ready for operation (used), STAYER SC/250 cap saw, mitre saw Dpqt3P Specifications: * blade diameter - max 250 mm * motor power - approx. 1.0 kW * engine speed - 3,600 rpm * spindle - 30 mm * cutting adjustment +/- 45 degrees * max cutting cross-section - 70x100 mm * weight - about 40 kg * overall dimensions 80 x 45 x 40 cm ( W x D x H ). Additional information: * factory technical and visual condition. * presented photos illustrate the actual state of the object of sale * possibility of switching on and checking the device on site * the price given in the auction does not include VAT

Condition: used, adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Diameter hollow shaft: Ø 19 mm -Construction: B5 -Number: 2 motors available -Price: per piece -Dimensions: 350/180/H200 mm -Weight: 14 kg Jauondnem

Condition: excellent (used), White N7Wp8M7Csn Type: SC / KWT - 1000 Technical data: Salt spray mist test MIN 5 K > Tu MAX +50°C Condensation water test MIN 5 K > Tu MAX +45°C Humidifier MIN 5 K > Tu MAX +75°C Temperature constancy The temperature deviation over time is ±1 K Dimension with hood: Test chamber: H 1190 mm x W 1650 mm x D 570 mm Dimensions without hood: Test area: H 740 mm x W 1650 mm x D 570 mm Dimensions with hood: Outside: H 1370 mm x W 2730 mm x D 800 mm Dimensions without hood: Outside: H 920 mm x W 2730 mm x D 800 mm Capacity approx. 700 - 1130 liters 3/N/PE AC 400V ±10%50Hz Rated power 4 KW Rated current 7.5 A Weight: 180 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2024, Condition: new, SUPER CRUSHER Shredder + Granulator Bjloqbluqw Super Crusher produced for converting e-waste and electronic cards into 1-2-3-4-5 mm granules. The main body of the machine has a shredder (at the top) and granulator (at the bottom). Electronic cards/e-waste fall from the conveyor belt into the shredder. Electronic cards/e-waste shredded in the shredder and reduced to the desired size in the granulator. In the end, granules collected with Cyclone. Electrical system: Simens and Schneider Hydraulic system: Bosch Rexroth Siemens PLC touch control panel SKF roller bearing

Year of construction: 1999, Condition: not inspected (used), For sale is a built-in salt spray chamber/corrosion test chamber from Weiss Technik, type: SC/KWT 450 The system must be cleaned and serviced before use. The system can be inspected on site, shipping is possible. Manufacturer Weiss Technik B2misngk99 Type: SC/KWT 450 Test chamber capacity: 480 l Max. load: 100 kg Brine storage tank: 180 l Corrosion tests: Salt spray test: Room temp. up to +50 °C Babumc3umw Condensation water test: Room temp. up to +45 °C Voltage: AC 230V Salt spray test SS: DIN 50021 Boe830Xfxbr Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014

Year of construction: 1996, Condition: excellent (used), Offered is a vacuum machine Röschermatic, camera size approx 56x50cm. Depth ca.25cm. 380v. Ready for immediate use, is workshop tested, defects removed. Vwgpfa More on request. Cash or prepayment! Sale only to advertisers, no warranty, no warranty.

Condition: used, tires, solid rubber tires, forklift tires Uuf8A8P8Sb -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 10 -Tire size: 23 x 9-10 SC 10 RIM 6.50F -Bolt circle: Ø 162 x 20 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimension: Ø 570 x 190 mm -Weight: 56 kg

Year of construction: 1989, Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Enfucir Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: excellent (used), Year of construction: 2019, Fomaco FGM 32 SC injector. 2019. 4 Stage Tray Filtration. New Motor. Meat / Fish Brine Injector. Belt width approx. 260 mm. Overall dimensions approx 1.6 m x 700 mm x 2.1 m. Uuufojhz02

Mileage: 1,208,000 km, First registration: 07/2014, Fuel type: diesel, Axe configuration: 4x2, Fuel: diesel, Wheelbase: 3,800 mm, Brakes: retarder, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Year of construction: 2014, Condition: used, Equipment: Abs, Air Conditioning, Parking Heater, Sleeping Cabin, Spoiler, = Further options and accessories = - Aluminum fuel tank - Roof spoiler - Electric windows - Remote-controlled central locking - Speed limiter - Intarder - Fridge - Alloy wheels - Fog lights - Radio/CD player - Sleeping cabin - Sun protection flap - Stability control - Parking heater - Power take-off shaft (PTO) - PTO shaft (PTO) - Central locking = Further information = AdBlue system: Yes Maximum front axle load: 8000 kg Maximum rear axle load: 11500 kg Number of cylinders: 6 Engine displacement: 12,902 cc Unladen weight: 8,019 kg Payload: 12,481 kg GVW: 20,500 kg Dimensions (L x W): 616 x 255 cm Uwgxe7Rrjv

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, Machine/vehicle number: 20120748931 + 20120748932, Warranty duration: 12 months, Film width: 650 mm, Input voltage: 400 V, Product height (max.): 220 mm, Product width (max.): 450 mm, Year of last overhaul: 2024, Equipment: Documentation/Manual, Servo-controlled and with maintenance-free sealing stamp drive The film packaging machines in the Compacta series are suitable for both fully automatic and semi-automatic packaging. Working in line, a light barrier control system enables manual and fully automatic loading. In combination with a half-tube film, three-sided sealed packaging can be produced. Shortest changeover times, highest quality standards The Compacta EGS is converted quickly and easily using motors without handwheels. This guarantees maximum precision and therefore maximum production reliability. Added to this is the wide range of format ranges, which enables a professional solution for all packaging tasks. With high-performance shrink tunnel C93Eri3 The SC 4530 SD is already equipped with a heat-resistant conveyor belt for processing fine shrink film and a switchable hold-down system. This means that even very thin products can be packaged perfectly. The air flow inside the shrink tunnel can be adjusted separately from the outside via double ventilation flaps. The transport speed can be infinitely adjusted on the control panel. A digital temperature controller and electronic air volume control enable the shrink tunnel to be set at a constant temperature of up to a maximum of 250°C. Compacta 5022 EGS Servo • Electrical control: Vipa • Sealing system: permanently heated with blade separation • Switch cabinet in running direction: right, with touch panel on the left • Feeding in running direction: in line • Operating side in running direction: Left • Max. film width: 650/650mm • Sealing stamp width: 500mm • max. sealing width: ca. 450mm • max. passage height: 220mm • Paint: brilliant blue (RAL 5007) • Inlet/outlet height: 850mm +/- 50mm • Power connection: 400 VDS, 50 HZ with earth and zero • Control voltage: 24 V DC • Pneumatic version: Rexroth • Compressed air connection: 6 bar, 9mm • Type of film: Polyolefin oder PE • Film thickness: 15 - 40 my • Electronically controlled sealing stamp drive for Compacta 5022 and BM (EGS), (servo mode, speed infinitely variable) • Needle perforation via 3-fold needle roller for the use of non-needled film • Needle perforation via needle roller additionally (to item 050) • Mechanical distribution device for film waste rewinding in conjunction with a large waste film store • Fully automatic format adjustment = Compacta Servo, motorised, can be called up in the touch panel via format data memory SC 4530 SD • Heating zones: 2 • Passage width: max. 450mm • Passage height: max. 300mm • Length of tunnel cover: 1.100mm • Heating power: 12,6 KW • Connected load: ca. 16 KW • Transition rollers: yes • Switch cabinet in running direction: left • Lacquering: brilliant blue (RAL 5007) • Inlet/outlet height: 850mm +/-50mm • Power supply: 400 VDS, 50 Hz mit Erde und Null • Conveyor belt size 1 • Device (chicane) for the plastic conveyor belt for processing polyolefin film. Attention: For a tunnel with a passage width of 450 mm, the effective passage width is reduced to 380 mm. • Cooling fan mounted in the outlet

Condition: good (used), Basic machine with sawing station for 90° cuts, including: Infeed roller with workpiece positioning stop Sawing unit Electronic control and control panel with TFT flat-panel display Hydraulic power pack Tilting and angular drive of sawing station Reversal of machining direction from right to left Lateral infeed Automatic loading system Support for machining short workpieces Combination support for vertical tools Pre-equipped for horizontal combination support Btr8Hxwxu Reinforced drilling machine Vertical router Revolving cutter Front marking device Waste evacuation control unit Modem maintenance Console labeller Waste evacuation belt Internal piping for micro-dust extraction Double horizontal cutter MACHINE CURRENTLY IN PRODUCTION - AVAILABLE IN NOVEMBER

Condition: used, tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tires CSE-Robust Super Elastic SC 10 2 pieces -Tire size: 23 x 5 SC 10 RIM 3.75 P Gpf3Ok -Bolt circle: Ø 160 x 18 mm -Recess: Ø 110 mm -Price/Delivery: complete -Weight: 41 kg/piece

Axe configuration: 2 axles, Wheelbase: 8,850 mm, Loading space length: 13,450 mm, Loading space width: 2,470 mm, Loading space height: 2,400 mm, First registration: 07/2010, Suspension: air, Tire size: 385 65 R 22,5, Year of construction: 2010, Condition: used, Equipment: Tail-Lift, General information Colour: Unknown Registration number: OL-70-BZ Gpgcqc Axle configuration Tyre size: 385 65 R 22,5 Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: air suspension Rear axle 2: Max. axle load: 9000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Measures Dimensions (LxW): 1388 x 260 cm Weights Empty weight: 9.800 kg Carrying capacity: 20.200 kg GVW: 30.000 kg Functional Tail lift: dhollandia, tail lift, 2000 kg Cooling: -30 °C to 30 °C Condition General condition: good Visual appearance: good Other information Cool unit make: Thermo King Additional information Please contact Rob Veldhuis or Arjan Kamsteeg for more information Cool unit brand: Thermo King

Mileage: 546,298 km, Power: 316 kW (429.64 HP), Fuel type: diesel, Color: white, Axe configuration: 4x2, Fuel: diesel, Brakes: engine braking, Driver cabin: sleeper cab, Gearing type: mechanical, Emission class: euro2, Suspension: steel, Year of construction: 2001, Condition: used, Equipment: Abs, Sleeping Cabin, Spoiler, General information Year of manufacture: 2001 Axle configuration Cccq938 Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.410 kg Carrying capacity: 8.590 kg GVW: 16.000 kg Condition General condition: good Technical condition: good Visual appearance: good Additional information Please contact Cees, Pedro or Arie for more information

Mileage: 211,212 km, Power: 300 kW (407.89 HP), First registration: 04/2022, Fuel type: diesel, Color: grey, Axe configuration: 4x2, Tire size: 385 / 55 / R22.5, Fuel: diesel, Wheelbase: 5,700 mm, Brakes: engine braking, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Suspension: steel-air, Loading space width: 2,460 mm, Loading space length: 7,510 mm, Loading space height: 2,780 mm, Year of construction: 2022, Condition: used, Equipment: Abs, Air Conditioning, Cruise Control, Differential Lock, Sleeping Cabin, Spoiler, Tail-Lift, General information Number of doors: 2 Cab: Space Cab Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Transmission Transmission: ZF Traxon, 12 gears, Automatic Axle configuration Make axles: DAF Brakes: disc brakes Front axle: Tyre size: 385 / 55 / R22.5; Max. axle load: 8000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle: Tyre size: 315 / 70 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75%; Reduction: single reduction; Suspension: air suspension Measures Dimensions (LxBxH): 995 x 255 x 395 cm Weights Empty weight: 10.610 kg Carrying capacity: 8.890 kg GVW: 19.500 kg Functional Tail lift: Dhollandia DHSM.20, slider lift, 2000 kg Make of bodywork: Hertoghs Schuifzeil Interior Interior: black Number of seats: 2 Maintenance APK (MOT): tested until 04/2025 History Service history: Present Number of owners: 1 D7V3Cpo Condition General condition: very good Technical condition: very good Visual appearance: very good Number of keys: 2 (2 hand transmitters)

Condition: new, Year of construction: 2023, Operating hours: 200 h, Machine/vehicle number: SCR 45 2SF, Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 1.800 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning / milling tools Tool Storage 20 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Ehgegon Coolant Pressure / Flow Rate: -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 3 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Year of construction: 2024, Condition: new, Functionality: fully functional, sink 1400 x 700 x 900 mm WxDxH 1x basin on the left, drainer on the right Pool size 600 x 500 x 300 mm with base cabinet left; right open for dishwasher Iuo8Lgkv incl. standpipe valve and drain plug, without siphon Stainless steel sink center NEW

Mileage: 410,152 km, Power: 355 kW (482.67 HP), First registration: 11/2019, Fuel type: diesel, Color: white, Axe configuration: 4x2, Tire size: 315/80 R22,5, Fuel: diesel, Wheelbase: 3,800 mm, Brakes: engine braking, Driver cabin: sleeper cab, Gearing type: automatic, Emission class: euro6, Suspension: other, Year of construction: 2019, Condition: used, Equipment: Abs, Air Conditioning, Cruise Control, Differential Lock, Parking Heater, Sleeping Cabin, Spoiler, AdBlue system: Yes Transmission: TRAXON, 12 gears, Automatic Tyre size: 315/80 R22,5 Brakes: disc brakes Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: parabolic suspension Ustwsetswv Rear axle: Double wheels; Differential lock; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Number of cylinders: 6 Engine capacity: 12.902 cc GVW: 20.500 kg