Used Belflex Bf100 Sc for sale (63,439)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Dwsdpfxoxbd Raj Ac Hed Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: new, Year of construction: 2025, functionality: fully functional, sweeping width: 530 mm, fuel type: electric, drive type: Elektro, Scrubber dryer Dwedpfx Acsxl H U Ae Hsd Condition: New machine Technical condition: New Battery voltage: 24V Battery capacity: 180Ah Battery type: Gel Battery year: 2025 Battery condition: New Description: New machine with 12 months warranty

Condition: used, mileage: 823,150 km, power: 340 kW (462.27 HP), first registration: 04/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2024, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF XF460 FT SC hydraulic tractor unit----Nutzfahrzeuge Göppl GmbH - DAF authorized dealer---- EZ: 01.04.2016 HU: 04/2024 SP: 10/2023 Service: .000km Equipment: * Space Cab cabin * Mechanical cabin suspension * Roof spoiler, adjustable * Compressed air horns, 2 sets * Sun visor * Side paneling * Driver's seat: Luxury Air + armrest Dedpfx Acoxmpcxj Howd * Passenger seat: Basic * Upper bunk * Lower bunk with drawer * Refrigerator or cool box * Navigation radio * CB radio * Truck phone * Air conditioning * Auxiliary heating * Auxiliary air conditioning * DAF Night Lock * Adaptive cruise control with FCW and AEBS * Predictive Cruise Control * Engine MX13, 340kW/462 HP * Automatic idle shutdown after 5 minutes * 12-speed AS-Tronic transmission * AS-Tronic light * Rear axle ratio: 2.64 * ZF-Intarder * Tires: * -Front: 385/65R22.5 * -Rear: 315/70R22.5 * ALCOA alloy wheels * Axle load monitoring * Wheelbase: 3.80m * Suspension: * -Front Parabola 8.0t * -Rear: 13.0t air suspension * Aluminum fuel tank: 845 liters * AdBlue tank 90 liters * Dust protection shield * Transmission auxiliary drive (PTO) * Single-circuit hydraulic system * Storage box * Air intake at the top with cyclone filter Optional: * Installation of OBU * Speedometer check * New general inspection / TÜV * New service (X+Y) * New mattress * New protective covers Viewing and test drive possible by arrangement at the Weiden location. ----Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg DAF authorized dealer - DAF service partner - FIAT-Professional Service Partner Subject to errors and prior sale Sale to commercial customers only

Condition: used, New: No Empty weight: 5 kg Part suitable for: trucks Type number: 1726098, 2008635, 1510886 DC16 17L01 620hp Occ ECU motorbesturingseenheid DC16 17L01 620hp Scania OEM : 1726098, 2008635, 1510886 Article nr.: V155006184-veiling Used ECU engine control unit DC16 17L01 620hp Scan Dsdoxiq Smopfx Ac Hswd

Condition: used, mileage: 499,000 km, power: 340 kW (462.27 HP), first registration: 06/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XF 460 FT 4x2 tractor unit, Euro 6, automatic transmission, Space Cap cab with 1 bed, power take-off, hydraulic tilt, adaptive cruise control, Lane Guard, collision warning, differential lock, light bar, rotating beacons, air horns, refrigerated compartment, sun visor, auxiliary heating, air conditioning, heated seats, roof hatch, 315/80 R 22.5 tires, Alcoa alloy wheels, radio/CD/AUX, navigation system, CB radio, single-family home First owner Dwsdpfxexha Sge Ac Hsd Test logbook

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2019, operating hours: 78 h, Equipment: air conditioning, all wheel drive, hydraulics, HOLDER C65 SC Municipal tool carrier with winter service equipment Accessories: 1. FIEDLER KVS-1205 wedge vario snow plough with a maximum clearing width of 120 cm Dodpoxg Hwgofx Ac Hjwd 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper This HOLDER C65SC tool carrier was first put into operation in 2019, has only 78 operating hours according to the meter, and is in well-maintained overall condition with the typical signs of use and wear for this equipment class. Maintenance service has just been completed. - Net price €70,900 // Gross price €84,371 - Inspection / test drive available on request - Nationwide shipping can be arranged, costs depend on distance! - We would be happy to provide you with an attractive leasing or financing offer through our leasing partner!

Year of construction: 2025, condition: new, machine/vehicle number: 747924113, Dipperfox SC600 - the new standard for urban greening. The Dipperfox product family is growing with the new addition - the baby Dipperfox, called SC600. As an original, the Dipperfox 850 Pro is the world's most effective stump removal machine for large excavators, for use in construction and forestry. Our SC600 model carries the performance, but can be be adapted for smaller carriers. The DF600 is a tool for people in cities, municipalities, arborists, and gardens - Where full size crawler excavators are too big to use. The main advantages compared to conventional stump grinders are safety, noise level and efficiency. Because Dipperfox's rotation speed is a maximum of 60 RMP, there are no flying debris and if the blade hits the rock, it is simply pushed away. No need to create large Safety zones to get the job done. And as a true member of the Dipperfox family, the SC600 does does the same job, but much faster compared to vertical grinders. It can also be used to work up to half a meter below the ground. It is very useful when you need to plant a new tree in the same Djdjlqak Dopfx Ac Hjwd same place where the original stump was located. Dipperfox SC600 is a multi-carrier tool suitable for the following: * Backhoes between 6 and 14t * Backhoe loaders from 6t * Skid steer loaders and compact track loaders from 6t * Hydraulic pressure 170-280 bar and 65-150 l/min Further information Equipment: shears, Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: used, mileage: 730,612 km, power: 390 kW (530.25 HP), first registration: 12/2017, fuel type: diesel, overall weight: 19,000 kg, tire size: 385/65R22,5, axle configuration: 4x2, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, number of seats: 2, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, parking heater, soot filter, traction control, DAF XF 106.530 SC EURO 6 - Automatic transmission - Retarder - Differential lock - Leaf/air suspension - Sleeping berth x 2 - Air conditioning - Auxiliary heater (parking heater) - Cool box - Electric exterior mirrors + power windows - Fog lights - EURO 6 - Aluminum fuel tank - 2 bunks - Adaptive cruise control - LDW (Lane Departure Warning) - Full spoiler kit - Tyres: 315/70R22.5 Very good condition! Export price! Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, so you will generally find export prices in our listings, as these are independent of the place of use. Yourtrucks GmbH compiles the content of this website with utmost care and ensures regular updates. This information is intended as non-binding general information and does not replace detailed individual advice for purchase decisions. Only the terms specified in the purchase contract shall be decisive. Changes, errors, typing mistakes, and prior sale reserved. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español Dodpfjxfa N Tex Ac Hswd - Falamos português - Parliamo italiano

Condition: used, SCM SC3 classic Djdpew Nwdwsfx Ac Hjwd Model: SCM GROUP SPA Manufacturer: SC 3C Max. saw blade diameter with scoring blade installed: 315 mm 90%45° max. saw blade projection from table: 100/79 mm Cutting width on parallel fence: 900 - 1270 mm Squaring stroke: 2310 - 2260 mm Three-phase motors starting from: 5(6)/50(60)

Condition: used, New: No Empty weight: 5 kg Part suitable for: trucks Type number: 1878368, 2039722 DT1217 L01 480pk Dedpfoxiq Hqsx Ac Hjwd Occ ECU motorbesturingseenheid DT1217 L01 480pk Scania OEM : 1878368, 2039722 Article nr.: V155006189-veiling Used ECU engine control unit DT1217 L01 480hp Scan

Condition: new, Year of construction: 2025, Control Fanuc 0I-TF chuck diameter 380 mm Dsdpsg Ix Rfsfx Ac Howd Max. swing diameter mm 850 Max. turning diameter mm 750 Max. workpiece height mm 700 Max. workpiece weight kg 1300 Z axis mm 620 X -axis mm -55, +425 ATC with 12 positions output kW 16/24 torque Nm 4195 place requirements mm 3205X2330x3500

Condition: used, functionality: limited functionality, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: poor Front tires type: Superelastic Front tires condition: 0 - 20% Rear tires type: Superelastic Dwsdpfxovcf Rnj Ac Hjd Rear tires condition: 0 - 20% Description: Engine defective Sideshift, 3rd valve, front work light, full free lift, dual tires,

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm - blade length approx. 250 mm - Profile steel shear cuts angles - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm Dedpfx Acjg Eubno Howd - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Condition: used, current capacity max 114 kVA throat 550 mm contact pressure capacity . kp weight of the machine ca. 290 kg Dedpfxsw Nrvno Ac Hewd Little used, in good condition, comes from a public institution including water cooling unit

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Dwodpoxdnn Iofx Ac Hjd Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: used, New: No Dwjdpfxsxhu E Io Ac Hed Empty weight: 5 kg Part suitable for: trucks Type number: 1392755 Scania 4 serie Occ ruitenwissermotor en ruitenwissermechanisme Scania 1392755 Scania 4 serie OEM : 1392755 Article nr.: B461006003-veiling Used wiper motor and wiper mechanism Scania 139275

Condition: used, mileage: 363,741 km, power: 330 kW (448.67 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XF 450 SC PXP ICE WHITE Central locking MX-11 engine, 330 kW/449 hp Cab emblem: 450 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 Upper bunk for luggage storage Halogen headlights Rear: 13.00 t, air suspension, SR1344 Emission class Euro 6 Traction control (ASR) DPF and SCR on the right side Drive rear axle with disc brakes Front underrun protection Automatic transmission, TraXon, 12 gears Interior trim color: Dark Sand Cab interior trim: Piano Black Passenger seat: Basic Front axle 1, 8000 kg, load index 156 Rear axle 1, 13,000 kg, load index 149 Adaptive cruise control with FCW and AEBS Soft-grip steering wheel, black Electronic Stability Control (VSC) Driver's seat armrest Glass roof hatch, electric operation Lane change warning system Power windows: electric Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Navigation radio for trucks, 6 speakers Exterior sun visor, green translucent Air-suspended cab Rear axle 1: 315/80R22.5 Rear view alarm Digital tachograph, VDO Aluminum fuel tank 430 l, height 620 mm ZF Intarder ADR, class AT PTO, rear of engine at 1 o'clock, spool valve 100 mm Tail light with LEDs Front axle 1: 385/65R22.5 Space Cab - Driver's cab Wheelbase 3.80 m / rear overhang 0.99 m Front: 9.00 t, parabolic, normal, 187 N First transmission PTO NH/4c-R-32/25 M8870 Ice white Alcoa aluminum wheels, brushed, 32 mm Automatic cab climate control Work lights, LED ECO performance 75-liter AdBlue tank, left side of the chassis Truck phone ECAS remote control with advanced functions Driver's seat: Luxury Air Rear axle ratio 2.79 Lower bunk with drawer, 65 liters Antennas: AM/FM, 2x GSM, GPS. Extras: CB Fog lights and cornering lights F1.385/65R22.5 R1.315/80R22.5 Lift axle switch CB radio 40 channels Additional speaker for radio Tilt hydraulics including separate 200l tank (ex works) Dwjdpfx Aowfvk Noc Hod High/low pressure tilt valve Swivel arms 350mm PXP hydraulically driven front axle -Supports when driving on roads with unfavorable traction conditions -It serves exclusively as a starting aid and can be used up to speeds of 20km/h. -Max. front axle load 8t - All information is provided without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, power: 47.81 kW (65.00 HP), fuel type: diesel, fuel: diesel, Year of construction: 2019, Equipment: all wheel drive, HOLDER C65 SC Municipal implement carrier with winter service equipment Accessories: 1. FIEDLER KVS-1205 Keil Vario snow plow with a maximum clearing width of 120 cm 2. FIEDLER FSSA-650 brine silo spreader with control panel 3. FIEDLER FKM-1310 front-mounted snow sweeper This HOLDER C65SC implement carrier was first commissioned in 2019, has only 88 operating hours according to the meter, and is in well-maintained overall condition with the typical signs of use and wear for this equipment class. A recent service has been carried out. - Net price: €69,900 // Gross price: €83,181 - Viewing and test drive possible by arrangement Dsdsxbf Nkjpfx Ac Howd - Nationwide shipping can be organized; costs depend on distance! - We would be happy to provide you with an attractive leasing or financing offer through our leasing partner!

Condition: used, Year of construction: 2002, machine/vehicle number: 9385/E, SECOND-HAND BAND SAW CML TYPO SC800 - CE RULES - S/N 9385/E Djdswr Ekrepfx Ac Hswd - Year 2002

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: SC2-00252, total width: 1,980 mm, total length: 1,250 mm, total height: 1,270 mm, empty load weight: 350 kg, Connection: 230V/ 50Hz/ 15Amp. Compressed air supply: not included in delivery Dwodpfsw Tlp Nex Ac Hod Serial number: GP2/ SC-2 - 252 Smallest tyre size: 170H x 219W mm Largest tyre size: 400H x 771W mm without angle direction

Condition: new, Year of construction: 2024, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, Vertical Turning center SCR 44 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 2.000 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 X 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines 2 X ATC for 12 turning / milling tools Tool Storage 24 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: Djdpfx Ajg Uwmqoc Hewd -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 5 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Year of construction: 2018, condition: used, New: No Empty weight: 5 kg Part suitable for: trucks Type number: 2064884 R Occ ECU G5 MAX versnellingsbakbesturingseenheid Scania OEM : 2064884 Article nr.: V155006109-veiling Used ECU G5 MAX gearbox control unit Scania Djdpjxhtl Hofx Ac Howd

Condition: like new (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 315 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, The SC 20 circular saw with tilting blade is a compact machine but with high level performances. Flexibility: The sliding table with steel hardened guide-ways assures processing without vibrations, exact movements and long lasting Ergonomics: ergonomically positioned control panel at the front of the machine. Besides machine "basic" configuration this machien has added big exctraction hood to more safer and comfortable working. The circular saw SC 20 with tilting blade and 1600 mm carriage is a compact machine but with high level performances that assure excellent results in any working condition. The carriage with sliding on guides made of hardened steel assure stability and precision machining Sawblade tilting 90 ÷ 45°: maximum flexibility Squaring frame with telescopic swinging arm support and 2 lenght stops Fixed table dimensions: 1020 x 325 mm Max. diameter of saw blade with scoring unit installed: 315 mm Saw blade tilting: 90° ÷ 45° Saw blade rotation speed RPM: 3500 Max. saw blade projection at 90°/45° with blade Ø 315 mm: 100/68 mm Max. squaring stroke: 1600 mm Standard cutting width on rip fence: 1270 mm Saw blade motor power at 50/60 Hz (HP) (S6): 5,5 kW Scoring unit with belt transmission Suction hoods diameter: 1 x Ø 120 mm/1 x Ø 60 (80) mm Suction speed: 20 m/sec Djdpfexawv Hex Ac Hjwd Air consumption: 850 m³/h Net weight basic machine: 350 Kg

Condition: excellent (used), functionality: fully functional, power: 50.01 kW (67.99 HP), fuel type: diesel, fuel: diesel, gearing type: hydrostat, Year of construction: 2016, Equipment: air conditioning, all wheel drive, car registration, hydraulics, HOLDER C70SC Municipal implement carrier with winter service equipment Accessories: 1. KUGELMANN B160/74 snow plough with a maximum clearing width of 160 cm 2. KUGELMANN Duplex silo spreader with 600 l capacity and control panel Dwodpfx Asxa Artjc Hed This HOLDER C70SC implement carrier was built in 2016, has only 1,052 operating hours as per the meter, and is in well-maintained overall condition with the usual signs of use and wear for this equipment class. Maintenance recently carried out. - Net price: €50,336 // Gross price: €59,900 - Inspection / test drive available by appointment - Nationwide shipping can be arranged; costs depend on distance! - We are happy to provide an attractive leasing or financing offer through our leasing partner!

Condition: used, axle configuration: 2 axles, first registration: 08/1989, color: other, Year of construction: 1989, Empty weight: 3.500 kg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm righ 8 mm Axle 3: left mm right mm We have the possibility to stack trailers! Dwsdpfx Acow Sml Ae Hsd