Lathe Stanko 1K62

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Dkedpezx E N Sofx Agtst Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: defective spare-parts repository (used), Year of construction: 2015, functionality: not functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item by September 18, 2026! A forklift will be provided on-site for loading. The machine is defective and is intended as a source of spare parts. TECHNICAL DETAILS Printing technology: Inkjet Color system: 7 colors MACHINE DETAILS Electrical connection data Dkjdpfx Agjzx E Axetjt Three-phase connection 1: 3/N/PE, 380–415 V, 50/60 Hz, 14 A SCCR three-phase connection 1: 1.5 kA Three-phase connection 2: 3/N/PE, 380–415 V, 50/60 Hz, 4 A SCCR three-phase connection 2: 1.5 kA Single-phase connection: 220–240 V, 50/60 Hz, 16 A SCCR single-phase connection: 35 kA EQUIPMENT Compliance: CE, KCC Safety approval: TÜV Rheinland – Type Approved Safety

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Djdpfxozw Ak Re Agtjkt Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Dedpfozvb I Esx Agtjkt Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 1,800 mm, turning length: 600 mm, spindle bore: 130 mm, spindle speed (max.): 400 rpm, controller model: Siemens 840D Powerline, TECHNICAL DETAILS Turning diameter: 1,800 mm Turning length: 600 mm Spindle bore: 130 mm Spindle nose: DIN 55027, size 11 Speed range: 1–400 rpm MACHINE DETAILS Control system: Siemens 840D Powerline Total power requirement: 38 / 52 kW Dimensions & Weight Djdpfx Aszv Rlgogtjkt Machine weight: approx. 25 t Transport width: 3,700 mm EQUIPMENT 6-jaw chuck

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! Dodpfx Aszv N Hpsgtokt TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, controller model: Siemens 840 D, table diameter: 1,220 mm, TECHNICAL DETAILS Dkjdpfxszuy Eas Agtot Table diameter: 1,220 mm Max. turning diameter: 1,500 mm Max. height under the cross beam: 900/1,200 mm Saddle travel, X-axis: 1,000 mm Table speed range: 4.5 to 100 RPM Feed rate range: 0.127 to 6.35 mm/rev Tool changer: 30 positions MACHINE DETAILS Control system: Siemens 840 D Main drive motor: 41 kW EQUIPMENT 8 clamping jaws 30 tool holders Full enclosure Mist extraction system

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Sheet thickness steel max.: 20 mm Dedozyakgepfx Agtokt Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Central lubrication system Cooling unit Documentation / manual Dust extraction Emergency stop switch Safety light curtain

Condition: used, Year of construction: 2001, lifting height: 11,500 mm, TECHNICAL DETAILS Platform height: max. 11.50 m Number of people: max. 2 Weight of people: 215 kg Weight of materials: 55 kg The height and weight of the item must be taken into account when selecting the transport vehicle. A forklift is available for loading. Dkjdpszwpd Refx Agtot If the item is not collected on time, a storage fee of €20.00 per lot and for each day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the photos provided or inspect the item on-site before the end of the auction.

Condition: used, machine/vehicle number: 425130268, Year of construction: 2016, operating hours: 813 h, load capacity: 1,000 kg, fork length: 1,150 mm, empty load weight: 500 kg, No minimum price – guaranteed sale to the highest bidder! Auction of two Jungheinrich EPL 110 (manufactured in 2016 & 2015) The 2015 unit is defective and will be sold as a source of spare parts! TECHNICAL DETAILS Lifting capacity: 1,000 kg Fork length: 1,150 mm Dkjdpfozwpctjx Agtot MACHINE DETAILS Battery voltage: 24 V Battery capacity: 85 Ah Dimensions & Weight Dimensions (L x W x H): 1,600 x 800 x 1,940 mm Self-weight: 500 kg Serial number, unit 1: 425130268 Operating hours, unit 1: 813 h UVV certificate, unit 1: 04/2026 EQUIPMENT Integrated battery charger The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No liability is assumed for typographical or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.