Cylindrical Grinding Machine

KELLENBERGER 600 U Nr. 35

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories Fodpfxorqwbie Afuofw - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis Ffedpfx Ajty A Ehofuow - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 Ffsdpfoyatx Sex Afuew hydraulischer Reitstock Mikroverstellung KEL SET Messsystem

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 path control in very good CONDITION CE compliant!! Fedpowrhxfefx Afusfw Technical data: >> Year of manufacture 2006 Machine-No. 348013 >> Rigid angle table >> Speed: stepless up to 4500 rpm >> Feed stepless in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Z axis 4000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare part diagrams, operating instructions for the control and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the machine: A Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 path control is being offered. This universal milling machine is in very good condition. It comes from a company where it was only used a little for training. A very easy-to-use control. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to view and test the Kunzmann live on site under power.

Condition: used, mileage: 443,865 km, power: 205 kW (278.72 HP), first registration: 11/2006, fuel type: diesel, empty load weight: 9,710 kg, maximum load weight: 8,290 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 5,700 mm, brakes: constant throttle, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: air, number of seats: 2, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, crane, cruise control, differential lock, immobilizer system, low noise, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Kz. House, 1x comfort seat, rear window, electric mirror, electric window left, electric window right, radio, cruise control, switch 8, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, front exhaust, differential lock, work lights, storage box, air suspension, low-noise G1, lashing eyes, U-protection, swivel drop sides, roof hatch, crane behind house, emergency stop, foldable, 2-point hydraulic outrigger, 2x hydr. extensions, yellow environmental sticker Wheelbase: 5700 mm Body: platform body with crane Palfinger PK9501-A, radio control 7.5t front axle, rear axle H6 13t disc wheel 440, disc brakes on front and rear axle, Telligent brake system with ABS and ASR, front underride guard, parameterizable special module (PSM), long-distance cockpit, pollen filter, Telligent maintenance system, tank capacity: 210l, auxiliary drive countershaft MB 131-2. Load diagram: 3.6m-2400kg, 5.5m-1560kg, 7.4m-1140kg. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Ffsdpjvhhxljfx Afusw - .

Condition: used, mileage: 232,000 km, power: 235 kW (319.51 HP), first registration: 10/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Int. No.: 1067 top-maintained Arocs 2532 with cable unwinder (3-way tipping) with FASSI crane * Mercedes Benz * Arocs 2532 * 6x2 * air-air suspension * permissible 26,000kg * cable unwinder (can be used with container as a 3-way tipper) * CRANE FASSI 165 A 2.22 * 2x hydraulic extension * 2x support * 5th + 6th control circuit * floor and high stand control * differential lock * central locking * 3-seater * * radio * AIR CONDITIONING * EURO * green sticker * very good condition * 1st hand * verifiable!!! trade-in possible financing from 1.99% subject to errors and prior sale! The information in this advert is a non-binding description and does not constitute a guaranteed property. The seller assumes no liability for typing and data transmission errors. The equipment listed must be checked separately. All information in the adverts is non-binding! Delivery throughout Germany on request Opening times: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!!! Fsdpfxjwhhnls Afuofw

Condition: good (used), Tool Milling Machine TOS FNGJ 40 with 3-axis Heidenhain Digital Display - Travel paths X/Y/Z: 600x400x400 mm - Automatic feeds and rapid traverse on all three axes - Spindle speeds from 63 to 3150 rpm - Tool holder ISO 40 - Hydraulic tool clamping - Swivel table 800x400 mm - Vertical and horizontal milling device - Swiveling vertical head with quill - Coolant system Fjdpfx Afox H Nx Asuefw - Tool trolley + tool holders + milling tools - Counter bearing + horizontal milling spindle - Clamping block for tool holders - Machine feet - Documentation Dimensions (LxWxH): 2.5 x 2 x 2.3 meters / Weight: 2600 kg Subject to errors and omissions.