Surface Grinding Machine

JUNG HF50 RD ZST

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. Iodpfoh U A I Rjx Af Sstr -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. -The machine can be pushed or fixed in place by means of lockable castors.

Year of construction: 2021, condition: new, Retrofit kit 2-axis digital display consisting of: FAGOR digital display with scales in Y- and Z-axis. Suitable scale holders f. HF50 Bracket for mounting the display behind the machine (see picture) Isdehcn Efopfx Af Sstr

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck Iodpfx Afewz Hf No Sjtr - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange.

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Ijdewb Hygspfx Af Sotr Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 2006, operating hours: 6,500 h, functionality: fully functional, grinding length: 2,000 mm, grinding width: 600 mm, total length: 2,000 mm, total width: 850 mm, workpiece weight (max.): 2,300 kg, grinding height: 750 mm, grinding wheel diameter: 450 mm, table speed: 40 mm/min, spindle speed (max.): 1,500 rpm, power: 15 kW (20.39 HP), input voltage: 400 V, - Machine in very good condition, with few operating hours. - Additional screen installed for better visibility of axis positions. - Accessories included with the machine: see photos. Itjdpjwhn Hnsfx Af Sor -Video available on demand. Installation possible by us: quote available.

Condition: refurbished (used), grinding length: 600 mm, grinding width: 200 mm, grinding length 600 mm Itjdpfxexal Hyj Af Ser grinding width 200 mm electromagnetic chuck 450×175 mm X-travel 660 mm Z-travel 225 mm grinding wheel size 250x25x51 mm Control Jung TouchScreen weight approx. 3000 kg

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control Itjdpfjxflclex Af Sjr -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Year of construction: 2021, condition: new, Conversion to holding force control f. JUNG HF50 / JF520 Can also be carried out "on site" if necessary Itsdpfx Ashcn Idef Sor

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0112F-01, grinding length: 600 mm, grinding width: 300 mm, total height: 1,800 mm, total length: 2,500 mm, total width: 2,400 mm, grinding wheel diameter: 320 mm, overall weight: 2,500 kg, PROTH PSGS-3060AH Surface Grinding Machine, year of manufacture 2002 TECHNICAL DATA & EQUIPMENT: Serial number: 0112F-01 Magnetic chuck dimensions: 600 x 300 mm Max. grinding wheel diameter: approx. 320 mm Including coolant filtration system REFERENCE NUMBER 63 DIMENSIONS & WEIGHT: 2500 x 2400 x 1800 mm 2500 kg NOTES ON COLLECTION: Collection can be arranged on a mutually agreed date between 17 and 20 November 2025 FCA D-54634 Bitburg, loaded onto truck Iodpfx Afexd Dzqs Sjtr

Condition: used, Year of construction: 1968, grinding length 500 mm grinding width 200 mm workpiece height 250 mm turning speeds 1000 - 4000 U/min table surface area 600 x 200 mm grinding wheel size 225 x 20 x 51 mm grinding spindle drive 1,5 kW table feed 1 - 20 m/min total power requirement 2,6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,6 x 1,6 x 1,8 m Automatic feed; 2-axis digital display; stepless speed control; Water-cooled sine angle magnetic clamping plate 400x135mm; 10mm magnetic pitch Itjdpfx Ajwuuwysf Sjr Sony digital display with scales for transverse and height adjustment Swing-out dresser on the grinding head Table direction reversal with contactless inductive switches LOSMA belt filter coolant system