Folding machine

Jorns

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hydraulic Bending Machine Jorns CH-4932 – 8 meters Type: MAXI-MULTI-LINE-200-SM-CNC400A-8 Year of Manufacture: 2000 Technical Specifications: Bwsdpewt Eikjfx Aaqsh - Working length: 8 meters - Installed power: 11 kW

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Bwedpfxeh Uhb Ss Aaqjh Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: spray head, crane lugs Design: vertical Bwedpfsyclrvex Aaqoh Notes: manway approx. 325 x 440 mm; minor dents in the cylinder Speed: 1390 rpm Internal diameter: 2,090 mm Total height: 4,500 mm Power: 1.1 kW Location: Bremen Nameplate: Volume: 13,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,760 mm Last application: animal feed TANK Max. permissible operating temperature: 50 °C Support type: height-adjustable feet Number of feet: 3 pcs EQUIPMENT Manway / access port: on the cylinder Outlet: DN65 DIN 11851 MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator manufacturer: PRG Voltage: 220/380 volts Agitator arrangement: mounted laterally on cylinder Agitator equipment: agitator shaft and propeller no longer available

Condition: used, tank capacity: 150,000 l, GENERAL Equipment: Venting/intake, crane lugs Construction type: upright Remarks: Minor dent in cylinder Outside diameter: 4,000 mm Total height: 11,600 mm Top head: conical bottom Location: external storage Nameplate: Volume: 150,000 liters Product-contact material: V2A 1.4301 (AISI304) Bwedpfx Aaoyci Alsqoh Condition: used Previous application: food VESSEL Lower head: flat bottom with slope Support design: flat bottom with slope EQUIPMENT Manhole / cover: in cylinder Outlet: present

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min Bwjdpfx Ajvh I T Noaqeh total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: K10027, control type: CNC control, degree of automation: semi-automatic, throat depth: 1,000 mm, bending angle (max.): 140 °, Equipment: CE marking, emergency stop, foot remote control, Jorns Long Folding Machine for folding Sheet Metal I have operated this machine from new. It is a very capable and reliable machine made by Jorns of Switzerland who are known to be at the very top of their game. It is capable of folding 1.2mm in steel and 2mm in aluminium. The machine has a 1m insertion depth and four backstops which are adjustable. (there is an option to add more, but we never needed to.) The machine also has a slitter installed for slitting sheets along the full length of the machine to desired width. This is all controlled from the CNC. The machine was manufactured in 2010. It has the Jorns CNC50 control system which can be programmed with 100 different programs. The machine is very easy on power as all folding movements are hydraulicly driven. Overall the machine is in extremely good condition and can be seen operating until Mid January. Machine comes with safety light curtains. Machine will be ready for collection middle/end of January. I would prefer buyer to collect but if delivery is necessary, it could be arranged as an extra charge. Machine is approx 8m long x 2m wide and weighs approx 7 Tonne. Bsdpfsx Ilx Iox Aaqswh New Jorns machine forces sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 05053-00/K22170, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 6,400 mm, Working length: 6400 mm Working thickness: 1.5 mm (400 N/mm²) Without shear Back gauges Bodpfoxm Sbdox Aaqowh Taper stop New controller (2022)

Condition: used, round bar steel 25 mm square edge steel 22 mm L-beam 70 x 7 mm cutting capacity 100 x 10 mm plate thickness 10 mm Bwsdpfx Aaehwaufjqsh total power requirement 1,3 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,1 x 0,65 x 1,5 m

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, working width: 6,100 mm, total length: 6,750 mm, total width: 1,550 mm, total height: 1,820 mm, input voltage: 400 V, - Hub cylinder seals have been gradually replaced over the last 6 years - Oil change carried out 2 years ago Bodpfxoxv Akbe Aaqowh - Machine was inspected by a specialist - Two adjustable angle presets - Electric cutting device - Cable for the cutting device was renewed 3 years ago

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, total length: 10,000 mm, CNC 5000 control with 17-inch color TFT touchscreen. - Automatic rotary cutting - Double hydraulic clamping set for sheet metal clamping (short and long) Upper beam with water bending groove, oil filler, clamping and leveling material, emergency stop rail along the entire length of the machine, emergency stop actuation integrated into the pedal for the upper beam and bending beam, a second pedal for two-person operation, a safety device for the upper beam, two clamping fingers for short pieces The machine is repaired, inspected, and cleaned by a specialist and is fully operational. A functional test will be performed. Bwodpewnyu Dofx Aaqjh Sheet metal width: 10,000 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm VA sheet thickness: 1.5 mm Back width: 150 - 1150 mm Color: Light blue/light gray Total power requirement: 400 V Space requirement: 12,500 x (2,367 x 700) + 2070 mm fence Insertion depth: 1150 mm Machine weight: 18,500 kg Positioning speed: 250 mm/sec Number of uprights: 8 Number of clamping jaws: 8 Bending angle: 145 degrees

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T Bjdpfx Aajit T Hysqowh - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Year of construction: 1993, condition: ready for operation (used), A total of 21 identical tanks are available. 1-12) 12x V2A stainless steel tanks, capacity: 10000l. 13-14) 2x V2A stainless steel tanks with removable agitator, capacity: 10000l. 15-21) 7x V2A stainless steel tanks, capacity: 11000l. All tanks have two taps and a tank lid. Documentation available. On-site inspection is possible. Bwjdpfed R Azlsx Aaqeh