5-axis machining centre

Hermle C 60 U

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Nwjdpfx Asx Eh Iqeahsb Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg Nsdpou Hag Nsfx Aahewb engine output 7,5 kW turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments

Condition: excellent (used), Year of construction: 2016, MAZAK Integrex i-300 1000U Max. machining diameter: 658 mm Max. machining length: 1,010 mm Nwedpfex A Ub Eex Aahob Max. main spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - Mazatrol SmoothX CNC control - SCHUNK three-jaw chuck, diameter 254 mm - Tool Eye - C-axis - Y-axis - Number of tool positions: 110 !!! - Tailstock - Reinforced coolant pump - Chip conveyor

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: HEIDENHAIN, controller model: i TNC 530, total height: 3,090 mm, table load: 1,600 kg, overall weight: 12,600 kg, spindle speed (max.): 15,000 rpm, swivel angle A-axis (min.): -15 °, swivel angle A-axis (max.): 136 °, number of axes: 5, General Data Measurements width 2300 mm Measurements depth 5100 mm Measurements height 3090 mm Machine weight 12600 kg Control Unit Brand HEIDENHAIN Model i TNC 530 Main Drive Spindle speed range 15000 Spindle motor power HSK-A 63 Number of axis 5 Movement X-Axis Movement 1350 mm Y-Axis Movement 1150 mm Z-Axis Movement 700 mm A-Axis Movement 136° (-16 +120) Table Table load 1600 kg Additional Equipment A.P. cooling through spindle Chip evacuation Tool control with Dual Laser Radio frequency touch probe Nwodpfxjx D I Nxs Aahjb Air through spindle APS (Advanced Process System) ITC (Intelligent Thermal Control) This 5-axis MIKRON HPM 1350U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON HPM 1350U machine we have for sale. Contact us for more information. Application Types Milling