Milling Machining Centers 5 Axis

HERMLE C 20 U

Condition: new, Year of construction: 2025, Set of jaws for Metso LT120, QUARRY TOOTH Fixed jaw MM0521203 18%Mn2%Cr - 2120 kg Swing jaw MM0521201 18%Mn2%Cr - 1875 kg Very good quality castings ALL CASTING CHECKED WITH SPECTROMETER, TO PROOF BEST QUALITY Dwedpfx Agspit Rbotob Price for set EXW Poland, worldwide shipping can be arrange

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system Dedjw Hxiwspfx Agtswb c/w tooling ----- Clearance Sales -----

Condition: good (used), Year of construction: 2013, functionality: fully functional, DECKEL MAHO PFRONTEN GMBH DMG MORI DMU 60 eVo Dwedpeyzamaofx Agtob Universal Machining Center Travel X/Y/Z: 600 / 500 / 500 mm Standard Spindle Speed Range: 20 – 14,000 rpm Motor Spindle: 18.9 / 14 kW (40/100% duty cycle) Standard Tool Holder: SK40 to DIN 69871 Control: Heidenhain iTNC 530 HSCI Operator Interface: SmarT.NC Control Panel: DMG ERGOline Control Display: 19" NC Swivel Rotary Table Clamping Surface: 600 x 500 mm B-Axis Swivel Range: -5° to +110° C-Axis: 360° Table Loading Capacity: 400 kg Direct Measuring Systems Table Cooling Spindle Version: 20 – 18,000 rpm Tool Holder: HSK-A63 to DIN 69893 Tool Magazine: 60 positions Magazine Type: Chain magazine with double gripper Heat Exchanger for Spindle and Table Active Cooler for Control Cabinet Direct Position Measurement System Full Enclosure Cabin 3D Control Touch Probe: Heidenhain TS 649 DMG 3D quickSET Toolkit Preparation 3D quickSET Software Option 5-axis Machine Configurations Signal Light: Four-color Preparation for Handling System: PH 150-8 Chip Conveyor: Scraper belt chip conveyor with cleaned slotted screen Internal Coolant Supply (IKZ) Paper Band Filter: 40 bar / 231 l/min / 600 l tank Rotating Viewing Window Pressure Air Seal Linear Measuring Systems Bed Flushing Flushing Gun for Chip Removal Blow Air Through Spindle Center Selection via M-function Serviced Air with Low Oil Content Power Failure Safety Package Overvoltage Limiter Undervoltage Monitoring with Fast Braking Actuation Operating Mode 4 Production Process Monitoring Documentation: German Screen Text: German / English DMG / MORI SEIKI Messenger DMG Netservice Client Automation: DMG PH 150-8 Pallet Loading and Unloading System with Handling Unit and Pallet Magazine Rotary Storage: 8 positions Servo Axes: 2 Z-Axis: Pneumatic Gripper Arm / Fork IPC with Touch Panel DMG Automation Job Manager Graphical Operator Guidance Signal Light: 4-color Integration Kit: For DMU 50 / 70, DMU 40 / 60 / 80 eVo linear Chuck: Erowa UPC P Pallets: Erowa UPC 320 x 320 mm Number of Pallets: 8 Hole Grid: 50 mm Z Support: Steel Interface: Profibus Standard Automation Electrical Interface Version 4.0 Safety Door and Emergency Stop Signals Robot Side Machine Gross Weight: 11,000 kg Machine Net Weight: 9,500 kg Machine Dimensions: 400 x 280 x 315 cm IKZ Package Gross Weight: 800 kg IKZ Package Net Weight: 650 kg IKZ Dimensions: 200 x 175 x 190 cm Chip Conveyor Package Gross Weight: 640 kg Chip Conveyor Package Net Weight: 590 kg Chip Conveyor Dimensions: 355 x 140 x 170 cm Transport Traverse Package Gross Weight: 200 kg Transport Traverse Package Net Weight: 200 kg Transport Traverse Dimensions: 210 x 80 x 50 cm

Condition: excellent (used), Year of construction: 2006, X-Y-Z Axes travel:520x320x350mm Fanuc control system BT30 10000 rpm spindle APC Automatic Pallet Changer System Pallet size: 650x440 mm IN OUR STOCKS WE HAVE: Dedpfx Agsnyh Sqstswb *Horizontal Machining centers *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: good (used), Year of construction: 2012, Hasegawa PM150 Machining Center Manufacturer: Hasegawa Model: PM 150 Year of manufacture: 2012 Number of axes: 4 Travel X axis: 150 mm Travel Y axis: 225 mm Travel Z axis: 200 mm Swivel axis: YES Rapid traverse X, Y, Z: 30 m/min Table load capacity: 80 kg Table working surface: 300 × 260 mm T-slot table: 12H7 × 5 Spindle taper: HSK E32 Spindle speed: 100 to 30000 rpm Tool magazine: 10 tools Max. tool size: Ø50 mm Memory capacity: 5120 m 2048 kB Dodpfox Hqv Nex Agtowb Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Work area: 800x600x500 Rapid traverse rate: 30 m/min Spindle speed: 15000 RPM, SK40 NC rotary table, diameter = 280 mm Electronic handwheel module Electrical thermal expansion compensation Ethernet interface, TNC 426/430 Dwjdjzv Syfopfx Agtob Measuring probe system, SK40, Renishaw Chip conveyor without chip cart Enclosed cabin roof section Air blow-off device, C800 The spindle was replaced in May 2018 with a total operating time of 25,185 hours. The current operating time is 31,083 hours. This means that the spindle has been in operation for 5,898 hours since its replacement.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically Dwodpfozc D Aasx Agtjb - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: new, Nikon V-20 B profile projector NEW, never used (new price 52,400 euros) x,y 250 x 150 mm screen around 500 mm 10 x and 20 x magnification light through and light on the product heidenhain quadra chek digital readout with various measuring/ and calculation functions turntable to align the product Dwedsvlph Aspfx Agtob documentation

Year of construction: 2020, condition: used, overall weight: 90,000 kg, total length: 9,500 mm, total width: 10,000 mm, total height: 7,000 mm, The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control), AVD (Active Vibration Damping), and CTC (Cross Talk Compensation). These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm with a table load capacity of up to 15,000 kg. The custom rotary table plate is equipped with 16 AMF zero-point clamping modules, enabling short setup times and flexible workpiece clamping. The machining center features an 80-tool magazine with HSK-A100 tool holder and an additional 3-tool pick-up magazine for large tools. A BLUM laser system for tool measurement and a wireless 3D probing system support automatic setup and monitoring of machining. Dsdpfx Aezknwcogtowb Additional equipment includes two Barberis chip conveyors, a 2,500-liter coolant processing system with drum filter, oil separator, and coolant cooling, automatic front doors, a camera system for workspace monitoring, a wireless handwheel, and the Breton Smart Start & Stop energy-saving system. Control ON: 21,347 hours Machine ON: 13,503 hours Program runtime: 5,812 hours Spindle runtime: 5,740 hours Travel X-axis: 4000 - mm Dimensions (LxWxH) approx.: 9500 x 10000 x 7000 mm Travel Y-axis: 4000 - mm Tool Changer: Yes Weight approx.: 90,000 kg Control: HEIDENHAIN iTNC 640 HSCI Travel Z-axis: 1300 - mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes