Plasma Cutting Device

HBM CUT 60

Condition: good (used), Year of construction: 1997, machine/vehicle number: 71-000988, Offer 24820 Technical data: - Cutting current continuously adjustable 30 - 100 A - Duty cycle 80 A / 100% ED - 100 A / 80% ED - Max. cutting thickness - Steel approx. 32 mm - Aluminum approx. 25 mm Lhodpfx Ajvqbdyjphjl - Stainless steel approx. 55 mm - Air connection 5 bar - Gas mixing system - Connection 400 V / max. 14.5 kVA - Space requirement approx. W 800 x H 1650 x D 700 mm - Weight approx. 250 kg

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V Lhjdpfx Apow En E Eehjl weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles

Condition: used, Plasma cutting machine MB - Welding Technology, Type Plasmaprof 50 Identical construction to CEBORA Machine no. 244311, year of manufacture approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Setting range: 2 levels Hose pack length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 volts, 50 Hz, 32 amp plug Space requirement L x W x H: 500 x 350 x 700 mm Weight: approx. 80 kg In good condition Lsdpfx Apedzqa Hohehl

Year of construction: 1996, condition: good (used), machine/vehicle number: 598, Offer 22391 Technical data: - Cutting length up to 200 mm - Cutting thickness: - Steel with 400 N/mm² tensile strength: 6 mm - Stainless steel with 600 N/mm² tensile strength: 4 mm - Stepless cutting angle adjustment: 30 - 120° - Pneumatically clamped - Automatic cutting gap adjustment - Locking stops on the left and right, each 300 mm - Table surface area: 1000 x 800 mm - With T-slots and depth stops - Table height: approx. 900 mm Lhedpfx Apeiqgd Eshsl - Depth stops - Drive: 400 V / 4 kW - E – foot pedal - Space requirement: approx. W 1000 x H 1350 x D 1510 mm - Weight: approx. 1800 kg

Condition: used, Year of construction: 2018, overall weight: 70 kg, terms of delivery: EXW (ex Works) Ledpsthwrtofx Aphjhl delivery time: on request terms of payment: 100% prior to delivery Manufacturer: MB Conveyors Type: PA_ALL 2470 x 500 Condition: gebraucht CONVEYOR: - Effective length: 2470 mm Effective width: 500 mm Height min. / max.: 800 / mm Total installed power: - Other equipment: PU Gurt, Lichtschranke, Abräumtaste CONTROL: - Bildschirmsprachen: - Operating manuel: - GENERAL DATA: - Total weight: 70 kg Total size L x B x H: 2,5 x 0,6 x m

Condition: good (used), Year of construction: 2008, machine/vehicle number: 87920908, Offer 24228 Technical data: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E.- welding cable - Ground cable Ledpev Hzq Sofx Aphehl - Connection cable - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 587 kg, maximum load weight: 2,113 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 2700 2 NEW VEHICLE Internal dimensions: 406cm x 204cm Side wall height: 35cm Loading height: 66cm Ledpfx Aork Ivxophjhl Gross weight: 2100 kg Payload: 2113 kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2 x 1350 kg axle with brakes and reverse-automatic Low chassis Fully welded hot-dip galvanized steel frame 35cm aluminum profile side walls with tension locks Folding and removable on all sides 15mm thick, non-slip and durable phenolic plywood floor Automatic jockey wheel with 400 kg load capacity 8 noise-dampening lashing rings with 800 kg tensile strength Reinforced 13" C-grade tyres with steel valves M+S tires Net/rope hooks on frame 13-pin plug LED front marker lights Rear lights with reverse light, rear fog light, and triangular reflectors OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side walls (discounted price) - AL-KO cable winch 12.5m - Black Edition (powder-coated side walls and rims in black) - Integrated loading ramps, 2800 kg capacity - Steel plate on floorboard - Full LED lighting - Anti-theft device - Fine- or coarse-meshed net - H-frame - Mesh sides in different heights, also closed - 30cm extension side walls with tension locks - Flat tarpaulin with or without bows - High tarpaulin 180cm or 200cm Additional accessories available on request! Plus freight to Gera and vehicle registration documents: €200 net Images are for reference only and may show optional equipment at extra cost. Haven't found the right trailer yet? Iajbqupd Nsrk Iwnefjn We have 50–100 vehicles in stock and available for immediate collection. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Specialist in axle repairs, also for caravans. Large range of rental trailers. Hnobqeghpbyeupd Nfoh We also offer a wide range of spare parts and accessories for trailers of all brands. Get expert advice by phone, visit our website, or come by in person.

Condition: used, Plasma cutting machine CLOOS, type CPS 40/80 Year of manufacture: 1990 Output at 60% duty cycle: 80 Amps Output at 100% duty cycle: 40 Amps Adjustable range: 40 and 80 Amps (2 stages) Lhedpfx Apedzqccohel Cutting capacity in steel: max. 25 mm Torch cable length: 5.5 meters Power supply: 400 Volts with 32 Amp plug - CLOOS hand torch Dimensions (L x W x H): 700 x 600 x 750 mm Weight: 160 kg Good condition

Condition: excellent (used), Technical data: 2 rollers, hydraulically adjustable 2 support rollers 3 driven rollers NC control Shaft diameter: 80 mm Shaft length: 160 mm Roller diameter: 224 mm Motor power: 5.5 kW Mobile control panel Dimensions (length x width x height): approx. 1240 x 1460 x 960 mm Weight: approx. 1.4 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Lhedszv Ernepfx Aphsl

Condition: new, Year of construction: 2023, welding current 30 - 100 A cutting capacity max. 50mm mm open-circuit voltage 170 V Lsdpfx Asw En Erephjhl Required air-pressure min. 4 bar connected load frequency 400 V weight 0,75 kg Dimensions (LxWxH) 1,2 x 0,7 x 1,0 mm Plasma cutting machine with cart - 105 RTX torch - Includes 7m hose package - Spare nozzles - Like new, ready for immediate use