Miter saw

Graule ZS 170

Condition: good (used), Year of construction: 2007, Graule miter and crosscut circular saw Type: ZS 170 with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide of the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontally adjustable fixed stops Fgodpfxozzf Dzo Ag Tsg lower saw blade guard can be connected to a dust extraction system Model: ZS 170 Motor: 400 Volt - 2.0 kW Speed: 3500 rpm Cutting length: 410 mm at 90 degrees Saw blade diameter: 420 mm Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2010, functionality: fully functional, Manufacturer: KALLFASS Model: UNIVERSA 500, year 2010 Model: Shrink Tunnel COMPACT 650 SO, year 2010 SPECIFICATIONS KALLFASS UNIVERSA 500 - fully-automatic side sealer Transverse seal bar, length: 500 mm Product clearance height: up to 200 mm Power supply: 208 - 480 volt Film, center-folded film: 12 - 80 μm Transport speed: 10 - 35 meter / minute Packaging capacity, max.: 85 cycles / minute Fsdpfx Agjxnzlhs Tsgg Technical Data Compact 650 SO Tunnel clearance in width: 650 mm Tunnel clearance in height, adjustable: 100 - 400 mm Length of the heated tunnel hood: 1100 mm Air-flow regulation with patented ring nozzle system: standard Maintenance free plastic-mesh-belt: standard Transport speed infinitely variable, frequency controlled: approx. 10 – 35 m/min. Capacity of the tunnel blower infinitely variable, frequency controlled: standard Energy saving 2-stage heating with special insulation in tunnel hood: standard Temperature control by means of electronic thermostat: switching precision +/- 0.2° C Wear resistant and contactless temperature control: standard safety device according to EC regulation machines EN 60204: limit temperature control: standard Working height, adjustable: 800 - 900 mm Power supply: 400 Volts, 50 Hz, with protective earth conductor Heating capacity, installed, 2-stage switchable: 9.0 + 4.5 kW Rated capacity: 14.5 kVA Nominal current at 400 V: 21.0 amps Total connected load: max. 37.0 amps (incl. add. three phase power supply) Position of control cabinet and operating side: left hand side in working direction

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm Fodpfxoxabzto Ag Tegg - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, Year of construction: 2026, Miter and compound miter saw with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontal adjustable fixed stops lower saw blade guard, can be connected to a dust extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees -90 degrees Model-----Saw blade-----Dust extraction port-----Weight ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories available upon request: Roller conveyor / fence type RO, RL, RLK, RLH and RLHK for processing aluminum and PVC profiles and for wood profile board processing the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with at least 2 support feet 3 m type RLK: roller conveyor fence with a fence slide that can be folded back - Machine stand Fgjdpfscnz N Hjx Ag Teg - Main switch with lock - Infeed roller conveyor Ro-St60 3 meters, right - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty fence/roller conveyor mm - scale on the rear beam, measuring slide with magnifying glass and fence flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock at 54634 Bitburg - free loading - - immediately available - Location: In stock at 54634 Bitburg - free loading - - immediately available -

Condition: used, Year of construction: 2008, Format: 550 mm Speed: 120 Tacts er minute Equipment: Kallfass Universa 500 Servo Fully automatic, continuous side welding machine Type: Hybrid side sealer with continuous product flow Product Feed:Simple feeding system, compatible with products of different lengths and automatic production lines Transport:Vacuum conveyor belt Motion Control:SIEMENS?? SIMOTION?? with servos for all product-related drives Operator Interface:SIEMENS TP 270 touch panel Fgjdpfxjzpghws Ag Teg Operation Mode:Continuous product flow with intermittent cross-sealing Kallfass Compact 650 D High-Performance Energy-Saving Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, Year of construction: 1995, Motor: 3.0 kW Can swivel on both sides Cutting height: 170 mm, with stand Fedpfszd Tgisx Ag Tsgg Location: Nattheim

Condition: new, Year of construction: 2026, machine/vehicle number: ZS170N mit ES-F3, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 170 mm, cutting width (max.): 410 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 40 mm, actuation type: manual, total length: 6,400 mm, total width: 1,200 mm, total height: 1,550 mm, table height: 920 mm, Equipment: CE marking, Mobile saw carriage, overall length 6400 mm, with a Graule SZ170N saw mounted on it. Stop roller track with folding stop and scale on the left side, 3100 mm, measuring length on the folding stop 3050 mm + attached extension with stop and scale for a measuring length up to 5000 mm. Feed roller track on the right side, track length 3000 mm. Track width on the left and right sides is 500 mm. Crosscut and miter circular saw ZS170 N, cutting height at 90° is 170 mm, at 45° inclination is 115 mm. Cutting length is 410. Machine can be tilted on both sides using a hand crank, up to 45° to the left and up to 60° to the right. Machine with carbide-tipped circular saw blade for wood, 420x4.0x40 mm, 48 teeth. Fedpjzwn T Refx Ag Tegg

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Fjdpfx Aszpgh Deg Tegg Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Condition: used, Year of construction: 1996, functionality: fully functional, Graule ZS 170 saw, year 1996, 1,600 EUR Graule 6/250 milling machine, year 2008 2,550 EUR Fgsdpjwp Stzjfx Ag Tsg Rotating magazine for window sashes and frames 500 EUR Roller conveyor, 7.5 m, used as a magazine for windows before the glazing station 600 EUR

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Fodpfezu Azdox Ag Tegg Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand

Condition: used, total length: 2,300 mm, total height: 1,400 mm, total width: 1,160 mm, energy consumption: 20 kWh, Used shrink tunnel for sale from our showroom: Shrink tunnel POF-L (high speed) Pro version incl. downhold module for thin/soft products. Chamber size LxWxH: 1900x500x150mm. Tunnel size LxWxH: 2300x1160x1400mm Current: 20kW. 32A, 3P, 380V. Weight: 450kg. New Price: 13.650 Euro Fgedpfx Agjrwm N Rj Teg

Condition: new, Year of construction: 2026, Cutting height at 90°: 170 mm Cutting length: 430 mm Horizontal mitre angle range: 45°-90°-25° Vertical mitre angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Dust extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Fsdpfx Aeizkhvog Togg Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Fgodpeu R Sypjfx Ag Teg - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: excellent (used), Year of construction: 2017, Power 13 KW Fodpfoxx A D Hox Ag Tjgg clamping range 500 mm voltage 400 V

Condition: used, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Fodoiixxnepfx Ag Togg Horizontal miter angle range: 45°-90°-25° Vertical miter angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Dust extraction port: 100mm Machine length: Machine width: Weight: 110 kg