CNC Lathe

GILDEMEISTER NEF 520

Condition: good (used), Year of construction: 2002, Gildemeister NEF 520 K Gildemeister NEF 520 K Cycle-Controlled Lathe with Siemens Sinumerik 810 DL Control, year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Details Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Turning length: 1,250 mm Control: Siemens Simatic Cross slide travel: 260 mm Distance between centers: 1,500 mm Main Spindle: Speed range – main spindle: 8 - 3,000 rpm Drive power – main spindle: 12 kW Max. torque: 920 Nm Gear stages: 2 Spindle nose: No. 8 DIN55027 Spindle diameter in front bearing: 120 mm Max. bar capacity: 62 mm Spindle mount: ME80 Chuck diameter: 250 mm Tool Turret: Tool system: MultiFIX - C Tailstock: Quill diameter: 80 mm Quill taper: MT 5 Quill stroke: 180 mm Cedew Iqd Iopfx Ahysri Feed Rates: Rapid traverse x/z: 4 / 6 m/min Feed force x/z: 5 / 10 kN Total power requirement: 28 kVA Machine weight approx.: 3.0 t Space requirements approx.: 3.5 x 2.5 x 2.0 m Accessories and Equipment: 1 coolant system About the machine: We are offering a Gildemeister NEF 520 K cycle-controlled lathe, year of manufacture 2012, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is extremely user-friendly and can produce surface finishes comparable to grinding. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Cjdozr Rugjpfx Ahyjri

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, spindle bore: 70 mm, center width: 1,350 mm, turning diameter over bed slide: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, quill diameter: 80 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 3,000 rpm, feed rate X-axis: 8 m/min, feed rate Z-axis: 10 m/min, total length: 3,400 mm, total width: 1,950 mm, total height: 1,850 mm, type of input current: three-phase, spindle motor power: 12,000 W, overall weight: 3,100 kg, travel distance X-axis: 260 mm, distance between centers: 1,350 mm, Used, very well-maintained cycle-controlled lathe "GILDEMEISTER" model: NEF 520 - HEIDENHAIN control system - Three-jaw chuck SCHUNK ROTA-S plus - Quick-change tool holder MULTIFIX size "B" - Centering tool - Coolant system Crsdez S Uarjpfx Ahyei - Documentation Technical data and dimensions: Subject to change without notice. The machine can be inspected in operation by appointment.

Condition: used, Year of construction: 2001, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain Crodpfx Asw Syc Ishyji weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m

Condition: used, Year of construction: 2000, operating hours: 3,273 h, machine/vehicle number: 15015702974, travel distance X-axis: 710 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, torque: 130 Nm, controller manufacturer: Heidenhain 426/430, workpiece weight (max.): 350 kg, total height: 2,724 mm, total length: 2,756 mm, total width: 2,020 mm, table width: 500 mm, table length: 700 mm, rotary table diameter: 700 mm, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-Axis Machining Center DECKEL MAHO DMU 70V We offer for sale an advanced, universal vertical machining center, the Deckel Maho DMU 70V (part of the renowned DMG MORI group), equipped with a numerically controlled (NC) rotary/tilting table. The machine features a compact and robust design, minimizing its footprint in the production hall while offering full capabilities for advanced 5-axis machining. AXIS SPECIFICATIONS AND WORKING AREA • Axis travel (XYZ): X = 710 mm | Y = 520 mm | Z = 520 mm • Working travel: 710 mm (X) / 520 mm (Y) / 520 mm (Z) INNOVATIVE NC ROTARY/TILTING TABLE (4th and 5th AXIS) • Mounting surface dimensions: ∅ 700 mm x 500 mm (practical design with factory-cut sides, facilitating optimal mounting of vises and fixtures) • Maximum table load: 350 kg (full mechanical safety of the gearbox, bearings, and measuring system) • Axis rotation range: • C-axis (rotation): continuous / multi-rotation operation (advanced trochoidal milling strategies) • B-axis (tilting): wide working range of over 180°, providing excellent access to the workpiece and freedom for angled undercutting MAIN DRIVE AND SPINDLE • Spindle speed: continuously (steplessly) adjustable in the range of 20 – 12,000 rpm • Spindle power: 15 kW • Maximum torque: up to 130 Nm (powerful cutting force guaranteeing excellent stiffness and stability during heavy rough machining of hard materials) Cjdezumh Iepfx Ahysri CONTROL SYSTEM AND TOOL MAGAZINE • Control system: Reliable and widely appreciated by operators, the Heidenhain 426/430 (simple dialog programming, intuitive menu) • Tool magazine: Automatic, compact chain-type magazine with a capacity of 32 positions (fast tool change in automatic cycles) LOGISTICAL AND CONNECTION PARAMETERS • Overall dimensions of the machine ready for operation (with chip conveyor): • Length: 2756 mm • Width: 2020 mm • Transport height: 2724 mm (the machine fits easily on standard trailers and passes through conventional hall doors) • Total machine weight: approx. 5,500 kg • Maximum power consumption (connection): up to 42 kVA • Input voltage: 400 V (AC - three-phase current) • Current protection (fuse): 63 A • Power supply frequency: 50/60 Hz MACHINE CONDITION AND ADDITIONAL INFORMATION The machine is in good technical condition, regularly serviced and maintained. It is ideally suited for both serial production and tool shops producing complex molds, dies, and precise 5-axis parts. The machine comes complete with a chip conveyor.

Condition: used, Year of construction: 2003, turning diameter 500 mm Crjdozc Ryrjpfx Ahyoi turning length 1000 mm control Heidenhain weight of the machine ca. 3200 kg t

Condition: used, Year of construction: 2001, turning diameter . mm turning length . mm control . Csdsyqwb Espfx Ahyeri type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2015, operating hours: 12,068 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 5,200 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 14,500 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Crjdpfx As Ahpfbjhyji Year of manufacturing: 2015 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 2.1 R8 Colour touch screen: 15 ["] Number of axes: 5 Stroke X axis: 460 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.0001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 14.5 [kW] Max. diameter grinding wheel: 200 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 12068 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 5200 [Kg] ADDITIONAL EQUIPMENT: CO2 fire extinguishing system (to be inspected by the buyer through a qualified body) A-axis for cylindrical grinding (Hollowshaft option) 8-position grinding wheel changer Electrostatic mist separator with noise silencer, DSL type AES-GAMMA 30 Hydraulic and electrical connections for automatic steady rest operation Automatic steady rest Manual tailstock Combined filtration system with paper band filter + cartridge filters, connected to a cutting fluid cooling unit 3-color signal tower light "Eco Loader" tool loader with its tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12 and Ø16) E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20) Grinding wheel holders x2 electrode holders L = 25 mm x1 electrode holder L = 45 mm x5 grinding wheel holders L = 45 mm SOFTWARE: TOOLSTUDIO Standard & Advanced TOOLSTUDIO Step Tools License TOOL STUDIO PC License WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for erosion) WALTER WINDOW MODE Package 63 for PCD drills More information upon request.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 650 mm, controller model: HEIDENHAIN 530, table width: 710 mm, table length: 1,400 mm, overall weight: 12,000 kg, WEMAS VZ 1200 Due to company restructuring, we have for sale: HIGH-SPEED 3-AXIS MACHINING CENTER Manufacturer: WEMAS Model: VZ 1200 Control: HEIDENHAIN 530 Year of manufacture: 2008 Table size: 1400x710 mm Travel: X 1200, Y 750, Z 650 mm Max. workpiece weight: 1800 kg Spindle: HSK 63A 16,000 rpm Power S1/S2: 15kW/19kW Cjdox Emm Uspfx Ahyeri Tool changer: 30 positions Workpiece probe: HEIDENHAIN Tool probe: HEIDENHAIN Chip conveyor Internal coolant supply (IKZ) The machine is in very good condition, serviced, and in continuous use.

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, Codpezqr Hnjfx Ahyjri coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.