Cycle controlled lathe

Gildemeister NEF 320

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts Iedpfexn Ar Ajx Abrjih 3-jaw chuck SCHUNK ROTA plus Ø 200 mm 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Operating manual The machine is in very good condition!

Condition: ready for operation (used), Year of construction: 2004, Immediately available from CH mold making facility: Iodpfxexn Ryuo Abreih

Condition: used, Year of construction: 2001, turning diameter max. 320 mm turning length max. 740 mm control Manual Plus 3110 Heidenhain greates pass round over bed 320 mm Swing dia. over traverse guideway 150 mm turning length 740 mm cross movement 185 mm centre distance 750 mm turning speed range - main spindle 10 - 4.000 min/-1 power capacity - main spindel 11 kW max. Torque 410 Nm spindle head No. 6 DIN 55027 spindle diameter in front bearing 85 mm spindle bore 50,8 mm max. chucking diameter 200 mm chucking diameter 200 mm type MultiFix - B dia. of quill 70 mm capture MK 5 quill stroke 120 mm rapid traverse x/z: 8 / 10 m/min Feed force ( X / Z ) x/z: 3 / 6 kN total power requirement 14 kVA weight of the machine ca. 2,0 t dimensions of the machine ca. 3,5 x 2,5 x 2,0 m Cycle controled Lathe GILDEMEISTER - NEF 320 Iijdpfx Asxmaghjbrjh - Operating-Hours (Power-On) : 21.529h

Condition: excellent (used), Swing over bed 212 mm Distance between centers 750 mm Spindle speeds 10-4'000 rpm Control: HEIDENHAIN Manual Plus Misc. accessories Ijdpfjud Nb Ijx Abroih MARCELS MASCHINEN CH

Condition: used, Year of construction: 2001, turning diameter over bed 320 mm turning diameter over slide rest 150 mm Iiodpfxexfwcqo Abrjh turning length 750 mm cross movement 185 mm turning speeds 14 - 3550 U/min centre height 160 mm spindle bore 52 mm tailstock quill taper MT 5 MK tailstock travel 120 mm tailstock quill diameter 70 mm rapid traverse X-axis 2000 mm/min rapid traverse Z-axis 2000 mm/min Control SINUMERIK 810 spindle drive 7,0 kW total power requirement 11,0 kW weight of the machine ca. 2,0 t dimensions 2,6 x 1,4 x 1,4 m Cycle lathe - 200mm chuck with reversible jaws - Multifix tool post - Machine feet - Documentation

Condition: like new (used), Year of construction: 2001, Gildemeister NEF 320 K Cycle-Controlled Lathe Siemens Sinumerik 810 DL Control Year of Manufacture: 2001 Very Good Original Condition Technical Specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Centre distance: 750 mm Cross travel: 185 mm Feed X: 4 m/min Feed Y: 4 m/min Rapid traverse X: 8 m/min Rapid traverse Y: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100%): 7 kW Speed range: 14–3550 rpm (2 ranges) Tailstock quill diameter: 70 mm Tailstock quill stroke: 120 mm Tailstock taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: Iiodpfxswx Rbps Abroh About the Machine: Offered here is a Gildemeister NEF 320 K cycle-controlled lathe with cycle control, year 2001, in very good original condition. The machine is, of course, fully operational. The slides run very smoothly and evenly. Even at high speeds, the Gildemeister operates very quietly. This latest generation of lathes is very user-friendly and allows for surface finishes similar to grinding. The machine comes from a training workshop of a large industrial company. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Coolant system Iedpfx Aoxn Apbjbroih Chip rinse gun 6 machine feet Operating manual

Condition: used, Year of construction: 1999, control Heidenhain Isdew Syd Sepfx Abroih centre distance 1400 mm weight of the machine ca. 3,6 t

Condition: good (used), Year of construction: 1999, Machine has 12,300 operating hours Gildemeister NEF 320 / cycle lathe, Year of manufacture: 1999, Control: Manual Plus, Centre distance: 750 mm, Swing diameter over bed: 320 mm, Iodpfxjw Rm Tds Abroih Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Accessories,

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Gildemeister NEF 320 K lathe cycle-controlled Siemens Sinumerik 810 DL control built in 2001, very good original condition Technical data: >> Built in 2001 >> Swing diameter over bed: 320 mm >> Swing diameter over slide: 150 mm >> Distance between centers: 750 mm >> Plane travel: 185 mm >> Feed X: 4 m/min >> Feed Y: 4 m/min >> X rapid traverse: 8 m/min >> Y rapid traverse: 10 m/min >> Spindle head DIN 55027 size 6 >> Spindle bore: 52 mm >> Drive power 100%: 7 kW >> Speed range: 14-3550 (2 levels) rpm >> Tailstock quill diameter: 70 mm >> Tailstock quill stroke: 120 mm >> Tailstock quill taper: ISO MK 5 >> Dimensions: 2600 X 1440 X 1440 mm Isdpfx Ajv Aix Asbrsih >> Weight of the machine approx.: 2.0 t Accessories and equipment: >> 1 three-jaw chuck Röhm 200mm with 2 sets of jaws >> Mulifix size B with 4 steel holders >> Operating instructions, electrical plans >> Machine feet About the machine: Offered is a Gildemeister NEF 320 K lathe with automatic cycles, built in 2001, in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Gildemeister runs very quietly even at high speeds. This newer generation of lathes is very user-friendly and surfaces can be produced as if they were ground. The machine comes from a training workshop of a large company. Take the opportunity to inspect this machine on site under power and convince yourself of its condition.