USED CNC-LATHE MANUF. GILDEMEISTER, MODEL MF SPRINT 65

GILDEMEISTER MF SPRINT 65

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit Njdpfx Ahsxa Epbe Newf - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Nwsdpfx Aswym Nfsh Nef Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 1997, Technical details: turning diameter: 65 mm turning length: 80 mm total power requirement: 30 kW spindle bore: 79 mm speeds: 25 - 4500 U/min slide I - cross travel: 155 mm slide II - cross travel: 82 mm longitudinal traverse (z-axis): 280 / 130 mm weight of the machine ca.: 6,5 t Njdeykrgiopfx Ah Nswf dimensions of the machine ca.: 10,8 x 3,8 x 1,8 m

Condition: excellent (used), Year of construction: 1997, operating hours: 65,543 h, functionality: fully functional, machine/vehicle number: 501637, rotational speed (max.): 4,500 rpm, bar diameter (max.): 65 mm, number of slots in tool magazine: 16, Equipment: documentation/manual, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Sinumerik 840C Bar loader: Irco RBK 7212, built in 1999 Bar length: 1 m Bar diameter/spindle bore: 65 mm Spindle Main spindle: Hainbuch chuck Counter spindle: 3-jaw chuck Nwodpfjwkp Ifsx Ah Nef Main drive Drive power: 28 / 21 kW Speed range: 25 – 4,500 rpm Torque: 320 / 240 Nm Feed rate for thread cutting: max. 10 m/min C-axis speed: 120 rpm C-axis torque (holding torque): 180 Nm Tool carrier Number of tools: 8 Shank diameter according to DIN 69880: 30 mm Number of driven tool stations: 4 Power: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Tool carrier 1 speed: max. 4,000 rpm Tool carrier 2 speed: max. 4,000 rpm Slide 1 Transverse travel / Longitudinal travel: 155 / 280 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X: 15 × 25 mm Thread spindle pitch Z: 15 × 32 mm Slide 2 Transverse travel / Longitudinal travel: 82 / 120 mm Rapid traverse speed X/Z: 22.5 / 22.5 m/min Feed force X/Z: 900 / 900 daN Thread spindle pitch X/Z: 15 × 25 mm MACHINE DETAILS Operating hours: 65,543 h Dimensions including bar feeder and chip conveyor (LWH): approx. 6 × 2 × 2 m Weight: approx. 6.5 t Operating voltage: 50 Hz, 400 V EQUIPMENT - Holder for finished parts - Cooling system - Chip conveyor - Documentation - Various guide tubes for the bar feeder - Including 2 tool holders