CNC Lathe

GILDEMEISTER MF 65

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Turret w/8 stations Control: Hfodpfey Hppzex Af Uog Siemens Sinumerik 840 C Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. Hodpfx Afeyz Sdqs Uofg This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, Year of construction: 2003, Technical details: Hfjdpfjyzyudjx Af Ueg weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Hsdpfx Afjxa Epbs Uefg Total weight: approx. 6,000 kg

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders Hfedeyaqr Ajpfx Af Ueg

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Hodpfewym Nfsx Af Uofg MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.