Vertical turning lathe

FREMTAS 16MFR3

Year of construction: 2023, condition: ready for operation (used), Two Vecoplan scraper chain conveyors are available. 1) VKU 800, year of construction: 2023, drive power: 5.5kW, belt speed: 24m/min, conveying capacity: approx. 120m³/h, belt width: 820mm, max. incline: 70°, section length: 10.2m. 2) VKU 1100, year of construction: 2023, drive power: 11kW, belt speed: 24m/min, conveying capacity: 180m³/h, belt width: 1150mm, max. incline: 70°, section length: 22mm. Documentation available. On-site inspection is possible. Ksdpst Iw Ryjfx Ad Ejdk

Condition: used, SPE Renergi Low Temperature Dryer. Kdedpfx Adowp Rqfj Eek The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Kdjdpfxel Dq U Ue Ad Esk Length 2900mm, width 1400mm Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified

Condition: as good as new (ex-display), Year of construction: 2023, Container turning device 10 tons load capacity Kdodpfed Nmx Tex Ad Eok Speed infinitely variable Hand and foot remote control Diameter from 320mm to 2800mm Roller diameter 300mm speed 6 - 60 m./h power 2 x 0,55 KW

Condition: like new (used), Year of construction: 2000, Welding turntable Heinrichsglück 15 tons load capacity Condition as new complete with accessories hand remote control, foot remote control, manual, documents, electrical plans everything available dimensions: Diameter of the clamping disk 2200 mm Height tilted to the middle 1450 mm Ksdpfx Adohcbmpe Ejdk Height horizontal 1800 mm speed 0,025 to 1,1 rpm Tilting range 0 to 135 Length 3400 mm Width 1800 mm plus 300 mm Dead weight 8000 Kg

Condition: new, Year of construction: 2024, Protec KT 10000 Welding Positioner Kjdpfx Asid Szvod Ejdk Complete set with handheld remote control 10,000 kg load capacity Clamping plate diameter: 2000 mm Tilted height to center: 1600 mm Horizontal height: 1920 mm Stepless speed from 0.01 to approx. 0.35 rpm (higher speeds possible) Tilting up to 120° Length: 2800 mm Width: 1920 mm Foot remote control available for an additional €390

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 Dimensions (L/W/H) 3500 x 2300 x 2400 mm Kdedpohy T Nvofx Ad Esk +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), machine/vehicle number: 5336, carrying power: 6000 kg surface plate measures: 1500 x 1500 mm dumping area: horizontal bis - 145 ° turning speed: 0 - ca. 1 Upm electrical connection: 400 V, ca. 5 kW space needed: 2800 x 2350 x 3250 mm weight: 5000 kg Ksdpogbt Sqefx Ad Esdk

Condition: new, Year of construction: 2024, load capacity: 10,000 kg, Welding turntable, container turning device 10000 Kg load capacity Double drive synkron with hand and foot remote control speed digital display diameter from 160mm to 4000 mm drive rollers diameter 300mm Kjdpfx Aok Admgsd Eedk dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 100 - 1000 mm / min. Motor AC 380 V

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece Ksdpfekwcnzox Ad Eedk 120 T Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!