Lathe - cycle-controlled

FLOTT - XYZ ProTurn SLX 425

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Bedpfx Afsxt E Nns Uocw Maximum cutting length 1080mm Swing over bed 480mm Swing over cross slide 257mm Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Tailstock quill taper No. 5 MT Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: used, Year of construction: 2004, grinding length 600 mm grinding width 400 mm workpiece height 375 mm digital readout 2 Achsen HEIDENHAIN table-size 650 x 350 mm max. table load 400 kg magnetic clamping plate 600 x 350 mm dist. center of grinding spindle - table 525 mm table travel longitudinal 650 mm table travel cross 350 mm table feed 2 - 28 m/min grinding wheel size 300 x 30 x 76,2 mm Bcjdpfx Afjym D A Ij Ujw dressing device Kopfabrichter voltage 400 V total power requirement 11,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,20 x 1,70 x 2,25 m band filter unit 1,00 x 0,75 x 0,80 m electric cabinet 0,90 x 0,40 x 2,25 m - Serial-No.: 25940604 - Automatic vertical feed - Electric handwheel - HEIDENHAIN digital display, 2 axes - Head dresser with compensation - Coolant device - Belt filter system

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2007 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Bcjdpfx Ajxawdkef Ujw Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, control Grind-X Bjdpfx Afoyiu Sxo Uscw weight of the machine ca. 2900 kg

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Y-axis: 498 mm, travel distance Z-axis: 640 mm, controller manufacturer: FANUC, overall weight: 6,000 kg, total width: 2,940 mm, total height: 2,203 mm, spindle motor power: 7,500 W, product length (max.): 3,400 mm, spindle speed (max.): 2,800 rpm, table length: 605 mm, table load: 1,500 kg, table width: 600 mm, number of axes: 3, This OKAMOTO ACC 64-6 CA-iQ was manufactured in 2023. It features a variable wheel speed up to 2800 min⁻¹, a spindle motor power of 7.5 kW, and a grinding wheel size of 405 x 50 mm. Ideal for precision surface grinding, this machine offers advanced control with its hydraulic and servo motors. Contact us for more information about this machine. • Feeds & speeds (common to all models) • X-axis (longitudinal) • Feed rate (hydraulic): 3–25 m/min (variable) • Handwheel feed: 47 mm per revolution • T-slots: 3 x 17 mm (optional) • Y-axis (vertical / grinding head) • Rapid feed: 2000 mm/min • Auto infeed (coarse): 0.001–0.03 mm (12 steps) • Auto infeed (fine): 0.0001–0.01 mm • Spark-out strokes: 0–5 • Handwheel division: µm • Z-axis (cross feed) • Continuous feed: 0–2 m/min • Intermittent feed: 0.5–20 mm • Rapid feed: 4 m/min • Handwheel division: 1 / / 50 µm • Grinding wheel & motors • Wheel dimensions (dia x width): 405 x 50 mm • Bore diameter: 127 mm Bsdpfx Afsyfuv Ao Uecw • Wheel speed: 1–2800 min⁻¹ (variable) • Spindle motor power: 7.5 kW • Hydraulic pump motor: 2.2 kW • Vertical servo motor: 0.5 kW • Cross feed servo motor: 0.75 kW • Electrical requirements • Voltage/frequency: 400 V / 50 Hz • Connected load: approx. 24 kVA

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication Bcsdpfx Afjxt Ibys Usw *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 400 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 3400 x 2647 x 2203 mm Additional information Horizontal surface grinder in almost new condition with few operating hours! Operating hours: see image PC control Okamoto Travel X-axis: 600 mm Travel Y-axis: 22.5 – 497 mm Travel Z-axis: 400 mm Speed range rpm: 1-2800 (stepless) Rapid traverse mm/min: 4000 Main drive kW: 7.5 Maximum table load in kg: 1000 Bedpfjym Twusx Af Uocw Accessories: - Electro-permanent magnetic clamping plate: 400 x 600 P13 mm, height 80 mm (make Wagner) - 2 grinding wheel flanges - Table dresser - Automatic straight dresser, spindle box mounted - Automatic compensation of the wheel dressing amount - Automatic central lubrication - Ball screw in the Y and Z axes with AC servo motor and measuring system - Coolant system with belt filter system