4-axis bar machining center
elumatec SBZ 140

Name: elumatec SBZ 140
Brand: elumatec
Price: 78000 EUR
Availability: InStock

EXW Fixed price plus VAT

€78,000

Year of construction

2014

Condition

Used (fully functional)

Location

Bretten

4-axis bar machining center elumatec SBZ 140

Machine data

Machine type:: 4-axis bar machining center

Manufacturer:: elumatec

Model:: SBZ 140

Machine number:: 1400040685

Year of construction:: 2014

Condition:: excellent (used)

Functionality:: fully functional

Price & Location

EXW Fixed price plus VAT

€78,000

Location:: Gewerbestraße 22, 75015 Bretten, Deutschland

Call

Details about the offer

Listing ID:: A216-99528

Update:: 12.04.2026

Description

Special Features:
Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS
Water-cooled spindle, 9.5 kW S1
3-layer machining possible
Carefully cleaned and overhauled – excellent condition

Description:
Graphical operator guidance and graphical service support
A-axis for stepless machining from above – swivel angle 180°
HSC milling spindle for speeds up to 24,000 rpm
Large machining width
Standard with clamping detection and automatic clamp positioning
8 tool stations
Complete profile machining with stationary profile bar
Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis
Robust, low-wear direct drive
Protective hood
Digital axis controllers for all 4 axes with high-resolution measuring system
4-axis industrial PC control
2 1/2 D interpolation
15" TFT color screen
Network connection RJ45 10/100 MBit
Hard disk
Full PC keyboard
Remote maintenance via TCP/IP (requirement: internet access)

Technical Specifications:

Max. machining length without frontal machining: 7,600 mm
Max. machining length with frontal machining: 7,500 mm (tool-dependent)
Travel X-axis: 7,700 mm
Travel speed X-axis: 65 m/min
Travel Y-axis: 850 mm
Travel speed Y-axis: 60 m/min
Travel Z-axis: 650 mm
Travel speed Z-axis: 60 m/min
Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180°
Positioning accuracy:
X-axis: +/- 0.1 mm / 1 m
Y-axis: +/- 0.1 mm
Z-axis: +/- 0.1 mm
A-axis: +/- 0.1°
Max. spindle speed: 24,000 rpm
Max. spindle power: 9.5 kW S1
Tool holder: HSK F 63
Max. cutter diameter: 80 mm
Max. milling cutter diameter: 200 mm
Compressed air connection: > 7 bar
Knsdpfoy Ah Tkex Amveb
Voltage: 400 V, 3 PH, 50 Hz
Fuse: 35 A
8 tool stations

Included Accessories:
Tool setting gauge
8 pneumatic material clamps
Automatic clamp detection
Dosing spray device
Protective hood
Front light barrier
Side safety fences (left and right)
Central chip extraction
2 pneumatic material stops
3-circuit clamping system

Length measurement for profile bar
Barcode scanner with wireless transmission
Special version with light barrier

Additional options available on request:
Programming software (office) eluCad, incl. hotline contract for 6 months
3D import license for one machine of category "L"
Data import license package for one machine of category "L"
CSV import license for one machine of category "L"
Macro hashing license for one machine of category "L"

Other information:
The machine is delivered ready for transport, including transport locks, loaded onto truck

Additionally, we optionally offer the following services on request:
Installation and commissioning
Machine training
4/5-axis training package for machine and eluCad

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2005

3 listings online

Call

Send inquiry

Telephone & Fax

+49 7043 ... show

These listings may also fit your interest.

Listing

Poland

7,824 km

Elumatec SBZ-140
ElumatecSBZ-140

Call

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travels: • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Knsdpfszaq Eisx Amvsb Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)

See details

Listing

USED CNC-LATHE MANUF. MORI SEIKI, MODEL SL-3H MORI SEIKI SL-3H

Sweden

7,676 km

USED CNC-LATHE MANUF. MORI SEIKI, MODEL SL-3H
MORI SEIKISL-3H

Call

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Kjdexg Nd Aspfx Amvonb Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

See details

Listing

CNC turning and milling center Elumatec SBZ 140

Lithuania

8,343 km

CNC turning and milling center
ElumatecSBZ 140

€45,000

ONO plus VAT

Call

Listing

Germany

7,870 km

4-Axis Profile Machining Center
ElumatecSBZ 140

Call

Condition: ready for operation (used), Year of construction: 2018, Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, barcode scanner for reading orders/machining operations and documentation. Was serviced regularly, an on-site inspection is possible. Knedszbb Rrepfx Amvjb

See details

Listing

4-axis machining center Emmegi Phantomatic T3 Star

Scerne

8,667 km

4-axis machining center
EmmegiPhantomatic T3 Star

Call

Year of construction: 2010, operating hours: 900 h, condition: excellent (used), functionality: fully functional, AXIS TRAVEL X-AXIS (longitudinal) (mm) 4,300 Kjdpjzq Rn Djfx Amvsnb Y-AXIS (transversal) (mm) 270 Rotary table -90°/90° continuous ELECTROSPINDLE Maximum power in S1 (kW) 5.5 Maximum speed (rpm) 20,000 Tool clamping cone HSK - 63F AUTOMATIC TOOL MAGAZINE Maximum number of tools in magazine 8 Maximum diameter of blade that can be inserted into the magazine (mm) Ø = 180

See details

Listing

Germany

7,870 km

Profile Machining Center
ElumatecSBZ 140

Call

Condition: ready for operation (used), A 4-axis CNC bar machining center Elumatec is available. Version: 6,4m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible. Kedpfsy Aafxsx Amvsnb

See details

Auction

Groningen

7,504 km

4-axis CNC machine
ElumatecSBZ 140

Details

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, working length: 7,600 mm, machine/vehicle number: 1400040505, number of axes: 4, TECHNICAL DETAILS Max. machining length with end face machining: 7,600 mm Max. machining length without end face machining: 7,720 mm EQUIPMENT 12 pneumatic collet chucks Kodpezhuyfefx Amvjnb 2 work areas 4-axis profile machining center; stepless machining between -90° and +90° with each available tool Automatic clamping position adjustment with absolute measuring system Two separate machining zones for tandem operation 4-axis control 18.5" color monitor, USB ports, and network connection Windows operating system EluCam software Automatic profile length measurement (on both sides) Barcode scanner The traversing tool magazine ensures short tool change times and thus optimal machining cycles; the magazine can be equipped with eight tools. 8x tool holders with collet chucks

See details

Listing

Blow moulding machine Krupp Corpoplast Blomax 4

Velekincë

9,137 km

Blow moulding machine
Krupp CorpoplastBlomax 4

Call

Listing

Gütersloh

7,706 km

2003 Elumatec SBZ 140
ElumatecSBZ 140

€44,000

Fixed price plus VAT

Call

Year of construction: 2003, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. Processing length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 RPM Windows operating system Knjdpfx Ameuwq S Doveb minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed fume extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg Very good condition

See details

Auction

Rod machining center Elumatec SBZ 140/60

Brandenburg

7,941 km

Rod machining center
ElumatecSBZ 140/60

Details

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,280 h, functionality: fully functional, travel distance X-axis: 4,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, swivel angle A-axis (max.): 180 °, TECHNICAL DETAILS Max. machining length without end face processing: 4,200 mm Max. machining length with end face processing: 4,080 mm Travel distances X-axis travel: 4,200 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Traverse speeds X-axis traverse speed: 65 m/min Y-axis traverse speed: 60 m/min Z-axis traverse speed: 60 m/min Swivel range A-axis: 0° - 180° Knedpow Svmijfx Amvob Positioning accuracy X-axis positioning accuracy: ± 0.1 mm Y-axis positioning accuracy: ± 0.1 mm Z-axis positioning accuracy: ± 0.1 mm A-axis positioning accuracy: ± 0.1° Max. spindle speed: 24,000 rpm Spindle rated power: 7 kW S1 Tool holder: HSK-F63 Max. cutter diameter: 80 mm Max. saw blade diameter: 200 mm MACHINE DETAILS Air consumption: approx. 180 l/min Machine weight: 4,200 kg Operating hours Spindle hours: 1,280 h Machine hours: 13,066 h

See details

Listing

Corner joining machine Pressta Eisele Pressta 4000

Zambrów

8,364 km

Corner joining machine
Pressta EiselePressta 4000

Call

Auction

Päijät-Häme

7,901 km

Rod machining center
ElumatecSBZ 140

Details

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1400040164, workpiece length (max.): 7,900 mm, spindle speed (max.): 21,000 rpm, The spindle motor was completely factory overhauled a few years ago and has only operated for approximately 100 hours since. TECHNICAL DETAILS Workpiece length: 7,900 mm Knodpfxoxy Hcio Amvob Speed: 21,000 rpm MACHINE DETAILS Pneumatics Pressure: 8 bar Electrical Data Connection type: 3/PEN Voltage: 400 V Frequency: 50 Hz Current: 24 A

See details

Listing

Gütersloh

7,706 km

2010 Elumatec SBZ 140
ElumatecSBZ 140

€47,000

Fixed price plus VAT

Call

Year of construction: 2010, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Maximum machining length: 3,100 mm Knsdpfx Amoxvp Nkovjb Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 3,000 kg Windows 7 operating system Minimum quantity spraying Clamp detection and automatic repositioning 6 pneumatic material clamps Loading is included in the price

See details

Listing