Surface grinding machine

ELB-Schliff Optimal 4250 NC-K

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) Fedpfxelkgvbj Ahasgf accessories: coolant equipment, collet chuck incl chucks

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm total power requirement:18 kW weight of the machine ca.:2,7 t Fodpfxjdmbrxj Ahasgf dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication Fgedpfx Ahsxapdcoaof  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: used, Year of construction: 2001, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI30 - Overhauled 2023 - Year of construction 2001 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min Fgedpfjvf I Diox Ahasf - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 6.8 Nm - DC motor X-axis power: 3.4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2300 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Year of construction: 1981, condition: used, Manufacturer: Deckel Type: FP 4 Fodpfx Aoihp U Dshajgf Table: Dimensions: 1000 x 470 mm Longitudinal movement (X-axis): 700 mm Transverse movement (Y-axis): 400 mm Vertical movement (Z-axis): 450 mm Spindle overhang: 50 - 450 mm Spindle mount: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5 - 1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5 - 1600 rpm Machine weight: 2000 kg Feeds (X, Y, Z axes): 18, 10 - 500 mm/min Accessories: Milling head with quill Table: 1000 x 470 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, space requirement width: 1,975 mm, space requirement length: 1,800 mm, space requirement height: 1,900 mm, Equipment: documentation/manual, Machine is in very good condition - used as a training machine until 2018; since then, the machine has hardly been in operation. Operating voltage 400 V Spindle mount ISO 40 Quill stroke 100 mm Fgedpfx Ahsw U Aahoasf Spindle speeds 63 – 3150 rpm Fixed table

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray Fgjdpfx Ahjyitxqeajf • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Base holder - 3-jaw chuck - Various PARAT tool holders Fgsdpfx Ahoxlz Rxjajf With original operating manual Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee

Condition: refurbished (used), functionality: fully functional, grinding length: 630 mm, grinding width: 230 mm, total height: 1,650 mm, total length: 1,535 mm, total width: 1,770 mm, grinding height: 360 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 20 m/min, grinding wheel diameter: 400 mm, table load: 180 kg, rotational speed (max.): 3,220 rpm, power: 1.5 kW (2.04 HP), disc diameter: 250 mm, Retrofit of Surface Grinding Machine TOS BSKF 20 NC with SCHNEIDER Control System - Machine is fully dismantled and retrofitted Standard Accessories: - 2-axis cycle control, manufactured by Schneider-Electric Functions: Infeed, Spark-Out, Dressing, and Compensation - Grinding wheel 250 x 20 x 76 mm - Grinding wheel flange - Electro-magnetic chuck 600 x 200 mm - Automatic feed on Y and Z axes - Diamond dresser holder (without diamond) - Coolant system with settling tank - Machine lamp - Centralized lubrication - Operating tools - Operating manual - CE declaration - Inspection report Fodpfx Ahsxf Ez Uoajgf Included: Transport and packaging On-site relocation with crane/forklift Commissioning Travel and accommodation expenses Accessories: - Partial enclosure - Single-point diamond, 0.75 ct - Balancing arbor with nut and wrench - Grinding wheel balancing stand - Set of levelling elements - Oil filling

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 Fgedpsxf Inksfx Ahajf with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.