CNC turning and milling center

DMG NEF 600

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Kedpfsxnpbqox Ad Eodk Type of machine: Nef 600 Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Spindle opening: 90 mm

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Kdedpfx Ajwbuyzod Eok

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg Kdsdjyztyajpfx Ad Eek max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm Kdedpfx Ajhqqnzjd Eok DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Kdedpowl A H Defx Ad Eek Equipped with internal grinding attachment Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Max Load Weight: 500 kg Working temperature: 150-750⁰C Kjdpfx Adem E Tvhs Eedk Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Kdedpfx Aetvar Iod Ejk

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm Kedpfsx Emvisx Ad Eedk turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as NC steady rest and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: good (used), Year of construction: 2011, Ref. -No.: 10622 Ksdpfx Aoym Nfzed Ejdk Manufacturer: BLANSKO Type: SKD 50 Year of construction: 2011 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Z - stroke: 1950 mm Turning Height: 4130 mm Faceplate Diameter: 4770 mm Swing Diameter: 5300 mm Max. Load on the face plate: 100000 kg Traverse path of the crossbar: 3600 mm Adjustment speed of the crossbar: 500 mm / min Further information: Pickup magazine with 8 tool holder positions Automatic clamping of the tool holder in the ram 1x straight boring head 1x 90° angle head (not in the pickup magazine) 1x set of jaws The machine can be inspected under power.

Condition: used, Year of construction: 1988, pressure 400 t Kjdpfx Adsvuukne Eedk distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F