Machining center

DMG DMU 50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 3,600 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 9,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 vertical machining centre was manufactured in 2005. It features a Heidenhain iTNC 530 control, a main spindle speed range of 20 - 10,000 RPM, and a rotary table with a clamping surface of 630 x 500 mm. The machine has undergone significant overhauls, including a complete X-Axis bearing replacement and new coolant pump installation. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 machine we have for sale. Contact us for more information. Additional equipment • Tool Positions: 16 / Max. Tool Weight: 6 kg / Max. Tool Length: 300 mm • Max. Tool Diameter: Without adjacent tools: 130 mm / With adjacent tools: 80 mm • Total Power Requirement: 17 kVA • No chip conveyor included / No automatic measuring probe included / No tools included Machine Benefits Qualitative Machine Benefits • Low spindle hours and power-on hours. • Never used in series production; operated with care and proper procedures. • Warm-up programs and maintenance routines followed for optimal performance. Technical Machine Benefits • Torque: 57 / 82 nm / rapid traverse (x/y/z): 12 m/min /feed rate: 10000 mm/min • Table clamping surface: 630 x 500 mm • Swivel range: -5 / +110° Isdpfxjx E D U Ae Ad Noal • Max. Table load: 200 kg • T-slots: 14 h7 / t-slot spacing: 63 mm • C-axis rotation: +/- 360° • Complete x-axis bearing overhaul including ball screw and bearing assembly. / various hydraulic components overhauled. / tool changer readjusted and sensor system replaced. • New door switch installed. / new discs installed (with some chip debris affecting them). / new coolant pump installed. / new screen installed. / new handwheel hr410 installed. • Machine is 5-axis machine with 3+2 configuration Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Pallet Changer 2 pos. - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification Iajdpfx Ajx H Tt Dsd Nol - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: used, Year of construction: 2000, 5-axis machining center DMG DMU 50 evo, year 2000. More technical details and additional photos available on request. Iaedpox T A Spsfx Ad Njl

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG Deckel Maho Machining Center 5-Axis Simultaneous Type: DMU 50 EVO Linear Year: 2006 Complete Machine With Documentation Iaedpfoxtqfnox Ad Nsl CNC Heidenhain Mill Plus type Machine disconnected Ready for loading

Condition: good (used), Year of construction: 2019, Machine has 1500 spindle hours DMG Mori CLX 350 V 4, year of manufacture 2019, control DMG Mori Slim Line / Siemens Shoptrun, travel X/Z 185/540 mm, Y-axis travel 80 mm, 12-position turret, live tooling, C axis, Tooleye tool measurement, three-jaw chuck KNCS 225/66, collet chuck, VDI 30 tool holder, Iasdpfx Adoxy Hyzs Nsl high-pressure cooling 12 bar, tailstock, chip conveyor, prepared for bar feeder,

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1536000043E, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, total height: 2,500 mm, total length: 3,400 mm, total width: 2,500 mm, table length: 630 mm, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, Machine is still powered on. Technical Specification: Travel distances X = 500 mm Y = 450 mm Z = 400 mm Swivel rotary table (B/C-axis) B-axis: -5° to +110° C-axis: 360° (mostly indexed, partially simultaneous operation possible) Table Clamping surface: Ø 630 mm × 500 mm (round/square) Max. table load: 200 kg (for full 5-axis use; up to 300 kg horizontal) Main spindle Iodpfsx N Swmox Ad Noal Taper: SK 40 (DIN 69871) Speed: 20 – 8,000 rpm (standard for most 2012 Ecoline models) Power: 13 kW (40% duty cycle) / 9 kW (100% duty cycle) Rapid traverse & feed rate X/Y/Z: 24 m/min Tool magazine 20 positions Max. tool length: approx. 300 mm Max. tool weight: approx. 6–8 kg Control: Siemens SINUMERIK 840D (solutionline) with DMG SLIMline® 15" panel + ShopMill interface Machine weight: approx. 4,100 kg Dimensions: approx. 3,400 × 2,500 × 2,400 mm

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Iaedjxvzy Uspfx Ad Nsl Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage Ijdpfx Aex Hx Rhod Noal - Blowing air through the spindle center - Internal coolant supply 18–70 bar - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 1997, Heidenhain Mill-Plus control system Travel paths X/Y/Z: 500 x 380 x 380 mm Isdevu Slpspfx Ad Noal Clamping surface 500 x 400 mm Tool magazine for 24 tools, SK 40 Speed 8,000 min-1 NC rotary and swivel table Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Spindle Speed 18000 RPM Tool taper SK 40 This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Isdpfex Rd Hpex Ad Noal Application Types Milling

Condition: new, Fully automatic palletizing system HYDRA+ cobot palletizer: 👉 up to 20 kg payload (optionally up to 25 kg) and 👉 up to 2 m palletizing height Depending on customer requirements, we offer different configurations of our palletising system. 💶 For full price details of the Cobot palletiser with 20 kg payload, please refer to the detailed price package (see attached PDF in EN 👉 8136716-2.pdf). The palletizing system includes: → Collaborative robot DOOSAN ROBOTICS Cobot H2017 for up to 20 kg payload; (optionally adaptable up to 25 kg payload with DOOSAN H2515) → Robot base and operating elements → Pallet frame for 2 Euro pallets → FJM suction pad for handling packages, construction as required → innovative palletizer software → individual design according to customer requirements → palletizing system, firmware and software up to date ❗ For logistical reasons, we only deliver within the DACH regions and countries bordering Austria. HYDRA cobot palletiser by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. Isdpfx Aei Emapod Nsal ©Franz Josef Mayer GmbH 2021

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t Ijdpfx Ajxluf Asd Nsal

Condition: ready for operation (used), Year of construction: 2008, operating hours: 46,380 h, Main Drive Number of axis 5 Spindle Speed 14000 RPM Spindle motor power 19 kW Tool taper SK 40 Movement X-Axis Movement 500 mm Z-Axis Movement 400 mm Y-Axis Movement 450 mm Control Unit Brand HEIDENHAIN Model iTNC 530 Iaodpfx Adex Nknwe Njl Tools Slots in storage 30 This 3+2-axis DMG DMU 50 was manufactured in 2008, featuring a Heidenhain ITNC 530 control system and a spindle speed of 10,000 rpm. It includes a 30-position tool changer and a rotary table. IIf you are looking to get high-quality milling capabilities, consider the DMG DMU 50 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2011, LANDIS LT-2 TWIN WHEEL CNC ORBITAL CRANK GRINDER Iaedpfxjrtrxxe Ad Nsl Equipped with: Landis 6400 CNC Control Siemens TOUCH HMI Arobetech Steady Rest Marposs P7 Gage System Lateral Locator Twin CBN Grinding Wheels Rotary Dresser Headstock Tailstock Rittal AC Units Specifications: Maximum Center Distance: 680 mm

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Model 810 D Iaodpfxox D Hbgo Ad Nol General Data Measurements width 2815 mm Measurements depth 4325 mm Measurements height 2450 mm Machine weight 4010 kg Main Drive Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Table Outer length 630 mm Outer width 500 mm Table load 200 kg Additional Equipment No. of Tools: 16 This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information. Application Types Milling