DMG DMC80U DuoBlock

DMG DMC80U DuoBlock

This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details.

• Control: Heidenhain iTNC 530 3D path control
• B-axis Travel: 180° (Universal milling head with controlled B-axis)
• Spindle Type: Integrated motor spindle without gearbox
• Spindle speed ranges:
• Operating mode 1: 0–10,000 rpm
• Operating mode 2: 0–800 rpm
• Operating mode 3: 0–5,000 rpm
• Spindle performance:
• Spindle Power (40% Duty Cycle): 28 kW
• Spindle Power (100% Duty Cycle): 19 kW
• Spindle hours: 34,062 h
• Machine on hours: 79,252 h
• Spindle: New spindle installed end of 2025
• Table Type: NC rotary table with pallet carrier
• Pallets Included: 2 pallets
• Pallet Clamping Surface: 800 mm x 630 mm
• Pallet T-slots: 14 mm per DIN 55201-A2
• Pallet Weight: 300 kg per pallet
• Maximum Permissible Workpiece Weight on Pallet: 1,400 kg
Kjdpsy Egbljfx Acdsdn
• Maximum Workpiece Height: 1,330 mm
• Maximum Workpiece Diameter: 900 mm
• Feed Rate (X/Y/Z): 0 - 60,000 mm/min
• Axis Acceleration (X/Y/Z): 7 / 6.5 / 6.5 m/s²
• Maximum Feed Force (X/Y): 13 kN
• Maximum Feed Force (Z): 9 kN
• Linear Scale Resolution (X/Y/Z): 0.001 mm
• Table Max Torque (40% duty cycle): 5,000 Nm
• Table Holding Torque (40% / 100% duty cycle): 5,000 Nm / 3,660 Nm
• Table Maximum Rotation: 35 rpm
• Pallet Changer Type: Rotary pallet changer
• Measuring Probe: Heidenhain TS 649 DMG Infrared probe
• Kinematics Verification: 3D quickSET toolkit
• Chip Management: Chip conveyor
• Mist Extraction System: Oil and emulsion mist extraction system with mechanical filter (1,600 m³/h flow rate)
• Cooling Capacity (Machine / Cabinet): 3.3 kW / 1.0 kW
• Electrical Connection Data: 86 kVA, 400 V, 50 Hz, Max Nominal Current 124 A
• Workpiece dimensions (max): Diameter 800 mm, height 600 mm
• Feed force (X/Y/Z): 10 kN
• Rapid traverse: 60 m/min
• Tool Holder Taper: SK 50 per DIN 69871 Form AD / Form B
• Tool Clamping Pull Stud: DIN 69872 Form A / Form B or ISO 7388/2 Typ B
• Tool Clamping Mechanism: Mechanical via spring force, hydraulic release
• Tool Magazine Capacity: 120 slots (vertical chain magazine)
• Delivery: January 2027

Additional equipment

• Dual pallet changer system
• Internal coolant supply (ICS) with 980 l tank and band filter (40 bar through spindle center)
• Clamping hydraulics
• Infrared measuring probe

Technical Specification
Taper Size SK 50
Through-spindle Coolant Yes