Mot. Welding rotary and tilt table

DEUMA KDT - 3000 G

Condition: good (used), Manufacturer: Deuma H015 Wheelbase: 640 mm Load capacity: max: 3000 kg Nihjt7Vl

Year of construction: 2013, Condition: ready for operation (used), The tape was checked in the workshop for its function;there is a functional description in addition, div spare parts free of charge. Length : 3000mm width : 680mm Useful width : 600 Height adjustable : 600-1200mm Cqminfbp Stop bar By means of the Mitsubishi control system and the light barriers, 3 pairs of cylinders are controlled at a time.

Condition: used, Year of construction: 2008, turning diameter 520 mm turning length 3000 mm control SIN 840 D Siemens z-axis 3150 mm Feed z- axis 1 - 40.000 mm / min rapid traverse Z-axis 40,00 m/min x-axis 600 mm feed x-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min Main spindle S1 spindle turning speed range 1 - 3.300 U/min power capacity at 100 % load 29,00 kW spindle head DIN 55026 - Size A11 spindle diameter in front bearing 160 mm spindle bore 115 mm C-axis 360 x 0,001 ° milling spindle S2 tool taper Capto C6 turning speed range - stepless 1 - 6.000 U/min y-axis -100 / +150 mm B - axis -110 / +110 ° tool magacine with 100 slots total power requirement 145 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,40 x 4,90 x 3,20 m Main spindle full clamping cylinder on the left, 2-compression clamping, with SMW 3-jaw chuck KNCS-N 315-91 Counter spindle, full clamping cylinder on the right, 2-compression clamping, clamping path monitoring, with SMW 3-jaw chuck KNCS-N 315-91; tailstock function Cross slide below with 2x12-fold disc turret, tool holder Capto C6 hydraulic steady Ø 35 - 245 mm, incl. holder for installation on the left or Dptbix right tool disc (not swivelling) probe plug gauge various tool holders Capto C6 Coolant paper band filter system DGS 1000L with skimmer air filter system

Condition: used, Year of construction: 2004, turning diameter 520 mm turning length 3000 mm control SIN 840 D Siemens z-axis 3150 mm Feed z- axis 1 - 40.000 mm / min rapid traverse Z-axis 40,00 m/min x-axis 600 mm feed x-axis 1 - 30.000 mm/min rapid traverse X-axis 30,00 m/min Main spindle S1 spindle turning speed range 1 - 3.300 U/min power capacity at 100 % load 29,00 kW spindle head DIN 55026 - Size A11 spindle diameter in front bearing 160 mm spindle bore 115 mm Bob7Vgnqs C-axis 360 x 0,001 ° milling spindle S2 tool taper Capto C6 turning speed range - stepless 1 - 6.000 U/min y-axis -100 / +150 mm B - axis -110 / +110 ° tool magacine with 100 slots rated current 168 A output 117 kVA total power requirement 145 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,40 x 4,90 x 3,20 m Main / counter spindle with hydr. Power chuck SMW-Autoblok KNCS-N 225-65 SMW steady rest type KLU-222-ZSW (Ø20-254mm) Coolant band filter system POLO SB-A0.4 pressureless volume V1=100L/V2=1100L Chain oil skimmer Flexo Cooling lubricant care Hamma Mikro 1000 electronic hand wheel Infrared probe Pickup station for 3 tools max. length 1000mm chip conveyor leveling elements wooden grates

Condition: good (used), Year of construction: 2014, Functionality: fully functional, Machine/vehicle number: 321 14, Total length: 210,000 mm, Total width: 30,000 mm, The Mahler continuous furnace is used and in good condition. Ideal for soft annealing, stress relief annealing, normalizing and soldering. An additional cooling section has been installed. This allows the system operator to carry out loading and unloading. A turntable at the end of the cooling section serves as a buffer for the finished material. The almost new water cooler is from Güntner. Accessories: Package for converting from natural gas to liquid gas, a new 800 mm wide braided link belt and various spare parts The Mahler continuous furnace is used and in good condition. Ideal for soft annealing, stress relief annealing, normalizing and soldering. An additional cooling section has been installed. This allows the plant operator to carry out loading and unloading. A turntable at the end of the cooling section serves as a buffer for the finished material. The almost new water cooler is from Güntner. Accessories: Package for converting from natural gas to LPG, a new 800 mm wide braided link belt and various spare parts. Technical data oven: Year of construction 2014 Belt width 800mm Working height above belt 220mm Heated length 3000mm Electrical heating capacity 170KW Heating zones 3 Working temperature 850-1120°C Belt speed 50-500mm/min Gross throughput 550 kg Weight 15,6t Technical data cooler (Güntner company): Year of construction 2021 Dimensions 5200 x 1600mm Dpbweb Max. permissible pressure 10bar Last test 2021-03-15 The machine can be inspected under power. Dismantling and transportation is at the buyer's expense.

Condition: new, GMN TSE 240 g-3000/20 Spindle SN 392977 0/03.90855.135,unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bg7R3Zrdfs8

Condition: used, Year of construction: 2001, Machine/vehicle number: 30202601, turning diameter:670 mm turning length:3000 mm control:840 z-axis:3150/3000 Z+ mm x-axis:700/260 X+ mm b-axis:-110/+90 ° c-axis:0,001 ° main drive motor:60/40 kW spindle turning speed range:2600/3300 U/min spindle diameter in front bearing:160 mm spindle bore:115 mm C0Gk28Ek0L lower slide:2 x 12, VDI 40 upper slide:25 KW no. of tools in the magazine:90 Stück wotkpiece diameter with 2 vacant positions:200 mm tool length - max.:900 mm tool taper:HSK 100/ VDI 40 rapid traverse::15/20 m/min weight of the machine ca.:35 t total power requirement:140 kW dimensions of the machine ca.:13 x 4,5 x 3,6 m CNC Turninig-Boring-Milling Center with opposed spindles and 2 saddles - SIEMENS 840 C safety integrated control for 8 axis - Left/Right spindle with C-axis, KNCS 400 mm power chucks - Lower saddle with 2 x 12-fold revolving heads - Turning,- boring,- milling unit on top saddle, HSK 100 tool taper, 25 kW drive motor, 10-4000 r/min, integrated B and Y axis - Coolant device with 80 bar and rotating filtering, coolant liquid cooler, oil mist exhauster - MARPOSS workpiece measuring device - Chip conveyor, complete splash housing with sliding doors.

Condition: new, Year of construction: 2023, Container turning device 3000 Kg load capacity with hand and foot remote control speed infinitely variable 120 to 1200 mm / min. Psxohpil diameter from 50mm to 3000mm Wheel size diameter 300mm x 50 dimensions per piece approx. 1680 mm x 550mm

Condition: good (used), Year of construction: 1999, Construction height: 550 mm, Lifting height: 1,550 mm, Carrying capacity: 3,000 kg, Platform: 2000x1000mm Lifting height: 550-1550mm Uaruunezxz

Condition: good (used), max. working width: 2000 mm for metal sheets up to: 1 mm opening width top clamping bar: 70 mm adjustment bending cheek: 10 mm Cdea7B0L space needed: 2300 x 600 x 1050 mm

Condition: like new (used), Year of construction: 2008, Functionality: fully functional, Fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Vss3Qy Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! We have 4 pieces on Stock!

Condition: good (used), grinding diameter max. 300 - 350 mm regulating wheel width 20 - 110 mm max. width of grinding wheel 110 mm turning speeds 1400 U/min Cspah889Qe total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,6 x 1,2 x 1,8 m

Year of construction: 1980, Condition: used, Volume: 25250 Liter Ckjzhuupnd Operating pressure: 3 bar Systemic volume: 25250 Liter Tank trailer - semi-trailer with bright beer tank for beer transport; the construction year of the trailer is 2012.

Condition: excellent (used), Catalog number 7426 Dpmcrr TECHNICAL DATA - max diameter of processed log 320mm - min length of processed log 2000mm - number of spindles 2pcs - circular saw blade diameter 500mm - smooth regulation of the feed speed on the inverter - power of the drive engine of the lower spindle 75kW - power of the drive engine of upper spindle 75kW - power of feed motor 2×2,2kW - power of motor of upper, input, pressing shafts 1.1kW - motor power of side shafts, bringing out, pulling 2×2.2kW top: - 2 pulling, gear shafts - saw shaft - from the side 2 output shafts, pulling, toothed - 2 outfeed shafts, sliding, smooth from below: - track - shaft with saws - caterpillar - total dimensions L/W/H 5900x2500x1900mm + control 1050x1300x2000mm - weight 3800kg Net price: 159900 PLN Net price: 36340 EUR depending on the price 4.4 EUR (Prices may change with higher fluctuations) Possibility to buy a feeder, which is listed on our other auction.

Year of construction: 2024, Condition: new, Functionality: fully functional, New 300 Ton/Hr Wheeled Eco Pug Mill Mixer. Complete with Twin Shaft 55KW Electric drive Pug Mill, 2 Powder Silos with fully intergraded measuring system for accurate and auditable dosing, 2 bin hopper 70/30 split with Live Head screen to reject over size, On board 200KVA Gen Set, On Board Compressor, Fifth Wheel coupler, Brakes, Lights (UK spec) Cmr9J3Hcso

Condition: refurbished (used), K+G Weather MWW130 The machine is in overhaul. The machine is completely overhauled. The machine has no feeding. Rated power:19 kW Total rated current:40 A Fuse protection (recommended) 3 x 50 A gL. Speed working screw:180/360 rpm Speed feeder screw:19/38 rpm Speed mixing shaft:9.5/19 rpm Errors excepted and subject to prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property. 8G9Apv7Xqd

Condition: reconditioned (used), Year of construction: 1996, Operating hours: 28,135 h, Functionality: fully functional, Pressing force: 60 t, Total width: 1,240 mm, Total length: 4,465 mm, Total height: 2,750 mm, Input voltage: 400 V, Transport height: 2,750 mm, Overall weight: 7,500 kg, Year of last overhaul: 2024, Filling opening width: 490 mm, Filling opening length: 815 mm, How do you do? We are offering you a packaging press (can press) from the manufacturer Sandersleben Maschinen- und Anlagenbau GmbH, type SMA-2500/1, with 60 t pressing force, 31 kW connected load, built in 1996. The machine has only run for 28,135 operating hours. With a compaction capacity of approx. 790 kg/m³ (depending on the material), the press is particularly suitable for compacting used disposable packaging (cans) made of ferrous and non-ferrous metals such as aluminum as well as punching waste made of steel or aluminum sheet. The package dimensions are 600 x 300 mm, the length is variable from approx. 50 to 235 mm depending on the material. The press has been overhauled. The following work was carried out: - Machine completely dismantled, cleaned, derusted, primed and repainted - Complete overhaul of the main hydraulic cylinder, new cylinder tube, new cylinder head, new gasket set. - Overhaul of the two cylinders from the counter pressure plate, gasket sets renewed Chwpicjq3Y - Knife set planned and ground - Residual emptying and cleaning of the hydraulic oil tank, new HPL 46 hydraulic oil filled and oil filter replaced - General maintenance work - Machine test We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 1998, I sell a presser from C&G. Year of production 1998.After a major inspection, new oil, reconditioned pistons, replaced hydraulic lines. The machine in perfect condition, never worked in steel scrap. It was used for copper. Imported from Italy. Dpl8Gp

Condition: new, Year of construction: 2024, Functionality: fully functional, Machine/vehicle number: RW-0, Payload: 1,100 kg, Key features of RW-0: 1. the product is new 2. hot-dip galvanized 3. Compatible with others of the same size - including mesh ones 4. with the possibility of stacking 5. suitable for lifting by both crane and forklift truck 6. capacity - 50 supports (number of platforms or other items depending on the arrangement) 7 Weight - 27.5kg 8. made of 60x60x2mm section. Cups and bottom caps made of 6mm sheet metal. 9. dimensions 1200x800x850mm 10.Declared load capacity (safe) static 1.1tons, dynamic 800kg. Maximum load capacity of 1.5 tons - individually, set on a solid base without stacking. 11. ideal for long items Dplzlz Galvanized modular pallet (construction basket) - for ceiling supports, H20 girders, pipes or scaffolding. The pallet is an important piece of equipment on the construction site, warehouse and all kinds of storage for the proper storage and movement of formwork, supports, punches, girders, heads. The use of such a pallet (basket) significantly speeds up the process of the construction itself because it is adapted for lifting with a crane (eyelets in the top cup), forklift or loader. Stacked pallets (up to 4 vertically) take up less space than individual bulk formwork components. Another advantage of the pallet is the transparency of storage - easy to count and estimate resources. The entire pallet structure is protected against corrosion by hot-dip galvanizing - all in accordance with PN-EN ISO 1461, which will guarantee long-lasting use. INNOVATIVE SOLUTIONS 1 We would like to inform you that our product has undergone many modifications over the years. It might seem that it is impossible to improve it more, however, we have decided to produce and test a basket marked RW-0S. The parameters listed above remain unchanged, however, an important new element is the lack of holes in the structural elements through which liquids can get inside and cause corrosion. The whole thing is done in such a way that zinc still gets inside the structure and has drains, but they are not visible from the outside. The only place where water in the form of rainwater can get in is the foot with the bottom cap, however, even this can be secured to make the basket tight. If you are interested in such a solution, please inform our salesman about it. The price will not change and you will receive a product of excellent quality. 2. in addition, an innovative solution is a basket that glows at night after illumination and reflects light (similar to horizontal and vertical markings on the road). The black and yellow (luminescent) colors are additionally covered with a special material that reflects light both at night and during the day. This goes far in the direction of health and safety solutions for construction site safety - better visible hazards for both drivers and workers on foot. Such a luminous basket/pallet, thanks to its surface, is definitely more visible than fencing tape or chain.

Condition: good (used), Height: 1800 mm Width: 1250 mm Length: 2400 mm Electrical power supply: 400V 50Hz 3N Total power: 18 kW Main material: stainless steel, acid-resistant Loading: integrated loader with the machine Throat diameter: 130 mm Wolf type: angle grinder Cf0Cyicjek Stuffing feeding system for the screw: hopper Throat construction: stainless steel Feeding screw material: stainless steel, acid-resistant

Condition: used, Year of construction: 1978, Functionality: fully functional, Machine/vehicle number: 150 359 - 11683, For sale PS160 (2 pcs) and PS140 (1 pc). One 250Mp the other 140t. PS160 is one of the complete machines and is in working order, 160 does not have the electrical cabinet. The machines are for sale as one and separately. Inquire by phone or e-mail! Dpk0Ub

Condition: good (used), K+G Wetter 90L with ejector. Machine immediately available. The machine has been refurbished. Bsswv7Ch For further questions we are at your disposal at any time. Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and/or liability is excluded. The machine remains our property until payment has been made in full.

Condition: refurbished (used), K+G Weather WW130 The machine has been completely overhauled by us. The machine is on site. Errors and prior sale reserved. All information is non-binding. Bf2O7Bwsuaq The accuracy of the information and prices contained are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Condition: reconditioned (used), K+G Wetter STL120L with ejector Dplkgf The machine is offered as overhauled. Stainless steel bowl. Cutter shaft with new bearings. Newly painted on the inside, newly polished on the outside. Knobs new. Subject to errors and prior sale. All information is non-binding. The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and/or liability is excluded. The machine remains our property until payment has been made in full.

Condition: reconditioned (used), Year of last overhaul: 2024, K+G Weather SM45L The machine is offered as overhauled. All ball bearings are new. Stainless steel bowl. Newly polished on the outside, newly painted on the inside. Knobs new. Subject to errors and prior sale. All information is non-binding. Dplke7 The correctness and accuracy of the information and prices contained are not guaranteed. A warranty and/or liability is excluded. The machine remains our property until payment has been made in full.