Milling machine for spare parts

Deckel Maho DMF 360 linear

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Fjdjvfdatopfx Afuepd Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 Fpjdjhik Ezepfx Afuod make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm Fedpfxjvuzg As Afuspd 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread)

Condition: excellent (used), Year of construction: 2011, Weiler Primus VC precision lathe Year of manufacture: 2011 Technical details Turning diameter: 250 mm Turning length: 500 mm Center height: 140 mm Swing diameter over bed slide: 280 mm Max. swing diameter over cross slide: 150 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power 4.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Fpodpfjw Ebdbsx Afujd Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Travel distances: X-travel Cross slide travel: 150 mm Z-travel by cross slide: 500 mm Z-travel by top slide: 110 mm Total power requirement: 15 kVA Machine weight: approx. 800 kgs Space requirements: 1400x935x1550 mm Accessories/options: - Documentations - 3-jaw chuck diameter 160mm, with jaws - 4-jaw chuck diameter 160mm, with jaws - Collet type chuck with collets - Tailstock - Multifix tool holder, with holders - Steady - Change gears - Different kind of tooling - Lista cabinet - Spare parts - etc... Under power in our warehouse.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Fjdjx Ivy Nepfx Afujpd Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Year of construction: 2022, condition: new, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz Table diameter 500mm Diameter hollow shaft 140mm table height 600mm, tilted to middle 450mm length 650mm, width 650mm Fpodpfx Afsg Sz Ucoujd Tilt range infinitely variable via crank gear motor 0 - 90 speed 0,3 - 2,5 rpm Incl. foot remote control Surcharge: Quick release - jaw chuck Diameter 400mm, 550.-€

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation Fjdpfx Aoyll A Tefuepd - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options Fpsdpfxoyi Amwo Afujd • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: good (used), OPM ISF120S Spiral mixer Fpedpfx Afsv Rglcouod 120L spiral mixer, stainless bowl and spiral, variable speed, forward / reverse, with timer, 3Ph

Condition: ready for operation (used), self aligning set of welding rotators one driven unit one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm Fpjdpox Enhyofx Afujd max diameter of workpiece: 7800 mm spare wheels included Max weight on both supports: 450 ton Number of wheels: 24 wheels Dia x width wheels: dia 580 x 140 mm Coating material on wheels: steel