Milling machine

Correa CF22/25-Plus

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control Nsdpfx Aev Sm Rujpholg • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 1965, groove width 3 - 90 mm drawing length 430 mm working speed 4 - 12 m/min slot-milling length 400 mm return speed 15 m/min total power requirement 5,5 kW Nodpfx Astv Iatephslg weight of the machine ca. 1,4 t dimensions of the machine ca. 1,3 x 1,7 x 1,5 m • with various honing needles and guidances

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 18105876-5772, shaft diameter: 360 mm, roller diameter: 800 mm, overall weight: 46,000 kg, total length: 4,500 mm, total width: 4,850 mm, total height: 3,750 mm, operating speed: 6 mm/s, Certified shafts made of forged NiCrMo alloy steel + Protected with height adjustment system (PHAS) Quick bending roll configuration change system (TIMS Technology) Side guide rollers adjustable in 6 directions with fully hydraulic controls Njdowayt Rspfx Aphjlg Steplessly adjustable rotation speed and simultaneous shaft movements Operating switches on a centrally movable control panel

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) Njdpfx Aezguumsphjlg - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Nlsdpsviuzcefx Apheg

Condition: excellent (used), pressure 125 t throat 400 mm stroke 6 - 125 mm Nljdpfxjt Eix Re Aphog ram adjustment 100 mm daylight (stroke down, ram adjustment above) 400 mm table surface area 1100 x 750 mm no. of strokes 60 Hub/min total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1,1 x 1,9 x 3,53 m - Machine is partially overhauled - was completely disassembled and technically checked, - new seals - new pneumatic clutch - new seals in the compensating cylinders - new drive motor - new ball spindle - new coloring - current UVV test and braking time measurement Machine safe for hand inlay work For an additional charge, we can equip the machine as follows: - Work area protection with BWS / cycle operation, but only in conjunction with a new control cabinet (separate) with ABB safety control and touch panel - 2-hand operation on separate stand

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 1500 mm z-travel 1460 mm Control Heidemhain type TNC 426 CB mm Rotary table 1350x1550 mm turning speeds 10-3000 U/min Nedpfxoyt R D Ss Aphelg spindle taper ISO 50 Table load 6000 kg T-slot - width 28h7 mm T-slot - distance 150 mm number of T-slots 150 Feed 10-3000 mm/min weight of the machine ca. 24 t B-axis 0.1-1.5 rpm Feed rate 3 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1991, condition: ready for operation (used), A Huron CNC bed milling machine is available. Travel X/Y/Z: 2400mm/1000mm/1000mm, control: Heidenhain TNC 415. An on-site inspection is possible. Nsdpfx Apov Ubp Rohelg

Condition: excellent (used), 1 lot SK 50 shots (28556) approx. 65 pieces approx.250 kg without pallet Nodpfx Apeuir Unehslg

Condition: used, Year of construction: 1999, x-travel 1900 mm y-travel 800 mm Nledpferpa N Ijx Apheg z-travel 800 mm control 426 Heidenhain weight of the machine ca. 12 t