Milling machine

Correa AXIA 115

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 2,200 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 3,000 rpm, table load: 16,000 kg, number of axes: 5, This 5-axis TOS WHQ 13 CNC boring machine was manufactured in 2013. It features a working spindle diameter of 130 mm, a transverse table travel of 5000 mm, and a table load capacity of 16,000 kg. The machine is equipped with a HEIDENHAIN iTNC530 control system and includes an automatic tool change system. If you are looking to get high-quality boring capabilities, consider the TOS WHQ 13 CNC machine we have for sale. Contact us for further details. • Working spindle diameter: 130 mm Gisdpfoy D R D Isx Acwew • Clamping: ISO 50 • Spindle extension (W): 800 mm • Table clamping surface: 2500 x 3000 mm • Control: HEIDENHAIN iTNC530 + handwheel • Motors and drives: SIEMENS • Scope of repair 2026: • Cleaning the machine • Checking and adjusting machine geometry • Checking machine functionality • Revision of electrical equipment • Revision of hydraulics and lubrication • Adjustment of clearances and optimization of drives • Replacement of guide surface wipers • Repair of telescopic machine cover • Replacement of balancing ropes • Repair of the platform • Revision of CHOV-K 20 bar cooling • Revision of automatic tool changer AVN60 • Machine with guarantee – please contact us for more information Additional equipment • CNC table – fully controlled B axis • CHOV-K 20 bar spindle axis cooling (emulsion / through-spindle coolant) • AVN60 automatic tool changer • CE platform and fence (guarding) • Chip conveyor

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm Gisdpfxow U Tlzo Acwew TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, x-travel 10000 mm y-travel 1100 mm z-travel 1700 mm Control Heidenhain type TNC 155 Tool changer 30 Gsdpfx Aceyqvc Ujwsiw table surface area 10000x1000 mm table height over floor 800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 5-axis machining center with traversing table, model MFS, equipped with an 840D Siemens control system. Travel ranges: 13200 x 3000 x 1200 Spindle: SK50, motor with a rated power of 15 kW. Gijdpfx Acoy Rgt Eswjw Maximum spindle speed: 2500 rpm.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Double Column Milling M/C - Gantry Type Brand: FOREST-LINE ALBERT / Type: MODUMILL 300G / Year of construction: 1999 Extensive modernizations in 2008 and 2021 ! Machine with interchangeable vertical and horizontal milling heads with automatic indexing. The machine can be inspected by appointment. Very well-kept, continuously maintained condition! TECHNICAL DATA: - CNC Control: SINUMERIK 840D - Travels X/Y/Z: 11.450 / 3.500 / 1.250 mm Cross-section of the Z-axis slider: 360 x 360 mm - Gantry passage: 3.000 - Height below vertical spindle: 1.400 mm - Working clamping width: 2.500 mm - Fixed table dimensions: 5.000 x 2.500 mm - Longitudinal pallet system EQUIPMENT: - Tool changer (chain magazine): 80-positions - Cooling through the spindle centre - 2 chip conveyors - Gantry panelling - Touch probe, Brand: RENISHAW - Electronic hand wheel - Remote diagnosis - Tool management and wear management - CE marking Electrical connection values: - Total power requirement: 130 kVA - External dimensions of the machine: 22,6 x 8,0 x 6,3 m There is no guarantee for correctness and completeness of the technical details Giedpfjzfbi Isx Acwsw and accessoires. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.