BRANDT molding edge milling machine

BRANDT OPTIMAT F 13

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot control 1200 x 800 mm suction nozzle 80 mm pneumatic connection Ceh8Huqoxj cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Condition: used, Brandt Optimat KD-83-F Edge thickness 0.4 -12 mm Autom. control panel - SPS control Pre-milling unit for joining before the gluing part Auto. Edge magazine for rolls and strips Gluing unit with rapid heating basin / INFRAROT control Workpiece height 10 - 55 mm Pneumatic pressure unit Dpjsw2 Cross-cut unit for rolls and strips up to 12 mm edge thickness with changeover from 0-15° bevel of the cross-cut saws Trimming unit, flush trimming, radius trimming, chamfer trimming - 25° Scraper unit Buffing unit Soundproof cabin CE version Machine is in EXTREMELY CLEAN CONDITION from carpentry dissolution - handicraft business ex location

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 0-261-07-2126, edge thickness (max.): 8 mm, working height: 950 mm, workpiece width (max.): 60 mm, workpiece length (max.): 4,760 mm, No minimum price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: KDN 530 C Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Suction diameter: 2 x 100 mm Working range Feed speed: 11 m/min (optional: 14 m/min) Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roll cutting: max. 3.0 x 45 / 0.8 x 65 mm Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Voltage: 400 V, 3 Ph, 50 Hz Cgvwsv8Xo3 Pneumatic operating pressure: 6 bar Noise emission value: 80-87 dB(A)

Condition: good (used), Brandt optimat KDF 340 edgebanding machine pre-mills glue application pneumatic pre-application guillotine Dqopqf pressure rollers pre-cutting balls top and bottom milling unit R1 - R2 profile cyclin R1 polisher max part height 50mm max thickness of veneer in a roll 3mm feed rate 11m/min machine length 350cm air demand 6 bar machine checked and tested, fully meets its functions

Condition: excellent (used), Sanding units 3 Sanding belt Dqomtv Profile sanding unit Chamfering unit Maximum height 10 cm very good condition,

Condition: ready for operation (used), Year of construction: 2008, Brand: Brandt Model: Optimat KDF 340 Machine no: 0-261-06-4567 Year of manufacture: 2008 Machine equipped with: -Pre-milling machine 2x2.2kw -Cutting unit 2x0.18kw (straight and chamfered 0-15 degree -Milling unit 2x0.27kw clean milling above and below -Scrapers, working from above, below, side. For chamfering, or deburring pre-milled PVC edges. -Polishing uint, 2x0.09kwf or processing edges above, below -Extendable support 350mm Techn info: Work piece min-max 8-50mm Edge trim fixed lengths 0.4-3.0mm (max 3x55mm) Edgeband on roll 0.4-3.0mm (max 3x30mm/1.0x55mm) Clvtiuwudy Feed speed approx. 11m/min Current 400 volts, 50 Hz, 3 phase, approx. 10kw Required compressed air 6 bar Weight 1100kg Length 3500mm With reservation for incorrect technical data.

Condition: used, Year of construction: 1996, Used machine Year of construction: 1996 Equipment and technical data: Spreading unit consisting of: -roll and fixed length magazine -roll separator -glue applicator -pressure zone Heating system: Glue basin Cross-cut unit Jointing unit Universal trimming unit Scraper unit Buffing unit Buffing unit Workpiece thickness: 10-55 mm Workpiece length: min. 160 mm Workpiece width: min. 65 mm Edge thickness: 0.4 - 12 mm Dqlk22 Roller cutting: 3 x 45 mm Feed rate: 13 m /min. Pneumatics: 7 bar Availability: Short term Storage location : Flörsheim

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 550 C, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Begd82Q Polishing brushes Control panel Power Control PC20+ Working thickness adjustment servomotorical Material height 8 - 50mm Edge thickness 0,4 - 8,0 mm Feeding speed 11 m/min. Total length including feeding plate 5860mm Total weight 2660 kg Very good condition, fully working!

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Ffhlpd08 Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, operating hours: 1,312 h, No. 3174 Edge banding machine Brandt KD 79B F Used, 1312 operating hours Right-hand version Edge thickness 0.4 - 12 mm Roll cutting max. 3 x 45 mm / 0.8 x 60 mm Workpiece thickness 8 - 55 mm Workpiece width min. 65 mm Bvmghltn Workpiece length min. 160 mm Feed max. approx. 14 m/min Electrical 400 V - 3 phase - 50 Hz Pneumatic connection 7 bar Control unit BRANDT POWER CONTROL PC 16 Motorized height adjustment QUICKMELT KD 70 gluing unit Joint trimming unit with 2 motors Snipping unit chamfer/straight with 2 motors incl. pneumatic adjustment Pre-milling unit with 2 motors incl. pneumatic adjustment Flush trimming unit with 2 motors Flush trimming unit with 2 motors and radius cutter Top and bottom profile trimming unit with 2 motors and 2 radius cutters Scraper with quick-change heads incl. pneumatic adjustment Cleaning agent spraying device Oscillating buffing unit with 2 motors incl. direction of rotation / speed control Transport dimensions approx. 7740 x 1500 x 2200 mm LWH Weight approx. 2700 kg Sale on behalf of customer, ex location near Munich, without dismantling, transportation and assembly Errors in description and price excepted Disassembly, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 2001, Condition: ready for operation (used), Edgebander BRANDT OPTIMAT KD 68 CF - year of production 2001 - DTR Bllgckho TECHNICAL SPECIFICATIONS: machine tool adapted to the processing of PVC / ABS edges veneer up to 3 mm thick and wooden sticks up to 9 mm thick pre-cutter - plate milling tape pressure glue tank, hot melt glue granules, additional glue application roller heated strip of tape guillotine - pre-cutting of the veneer 3 pressure rollers 2 ready-to-cut ball crushing units 2 milling aggregates for edge shaping (radial milling cutters) an aggregate for making corners (milling) sanding units - for removing excess glue polishing aggregates max. workpiece thickness 50 mm min. workpiece width 60 mm min. element length 160 mm feed speed 96 m / min total power 10.8 kW diameter of the extraction port 120 mm dimensions (length / width / height) 5700/1200/2100 mm weight 2000 kg

Condition: used, Year of construction: 1996, machine/vehicle number: 0-261-03-710, Kantendicke : 0.4 - 12 mm Rollenkante : 3 x 45 mm bzw. 0.8 - 60 mm Werkstückbreite min. : 65 mm Werkstücklänge min.: 160 mm Werkstückdicke : 10 - 55 mm Vorschub : 13 m/min Vorfräsen ( Fügen ) Leimbecken Quickmelt Verleimteil Kappen Bündigfräsen Fasefräsen Radiusfräsen Eckenkopieren Zpjn2Zpc Flachziehklinge Schwabbelaggregat Maschinenmaße: 7450 x 1220 x 2400 mm Gewicht : 3000 kg Lagerort: Nattheim

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Machine with only a few operating hours C92Ehpu

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Bsjgxwpftis Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 0-260-20-1170, Kantfräs & kap Brandt Type: Optimat FTK 130 No: 0-260-20-1170 Year: 2008 The FTK 130 has been conceived as complementary to edge banding machines. The main application of the FTK 130 is shaped workpieces, where internal as well as external radie can be processed. Also straight workpieces can be easily processed. Shaped workpiece trimming technology For small shops the FTK 130 is offering a flexible and cost effectiv solution for their trimming requirements. Bi93Vnmlgma In order to process internal and external shapes, the trimming motors are mountedvertically. Milling and cutting units for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radie. Cutting unit to precisely cut excess front and back edge trim material. in the longitudinal direction of the working pressure. Techn info: Milling unit Workpiece thickness approx. 12-55mm Workpiece width min approx. 30mm Inner radius min.ca.35mm Edging thickness max. approx. 3mm Milling tool 2xWPL radius cutter r=3, diameter 67x21x16mm Milling motors 11000v/min Cutting unit Workpiece thickness 12-55mm The thickness of the edging material max. 3mm Saw blade diameter 100mm Sawing width 3mm Center hole 36mm Compressed air 6 bar, connection 1/2", approx. 2000PA Air consumption per stroke approx. 10NL Extraction power diameter 80mm, 510m3/h, air speed 28m/sec Current 400 volts, 2.5kw 50 hz, 3 phase, 16A Dimensions: 1130x765x1480mm (lxwxh) Weight 320 Kg Stock no: 2001877BXA

Year of construction: 1981, Condition: used, Radius/flush milling machine, edge milling machine, edge milling machine, molded part milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inner and outer radii -Built-in milling cutter: 30 ° B9Rbhin -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Year of construction: 2009, Condition: like new (used), Glue tank Guillotine Qutxx Cutting the front / back of the ball Milling up / down cutters R2 Material feed 11 m / min European CE certificate

Year of construction: 1988, Condition: used, - with lateral crosscut saw Jxviffrqw

Condition: used, Edgebanding machine Brandt Optimat KDF 530 C with zero joint edge banding unit from Schugoma - Edge thickness, rolls 0.4 - 3.0 mm - Edge thickness, strips 0.4 - 8 mm - Roll separation 3 x 45 mm / 0.8 x 55 mm - Right execution - Feed up to 11 m/min - feed up to 14 m/min (without form cutter) - Parts preheating - Adjustable infeed ruler - Joint milling unit FG3500, 2 x 2.2 kW 200 Hz - Direct application of glue to the workpiece - Granulate glue system - Quick change glue pot - Cross-cut saw unit HL6130, 2 x 0.18 kW 200 Hz - Front and rear capping 0 - 15 degrees - Electro-pneumatic adjustment straight / chamfer - Milling unit BF6240, 2 x 0.55 kW 200 Hz - Form milling unit FF6210, 0.35 kW 200 Hz - Electro-pneumatic process of the form trimming unit - ZK6520 scraper unit - Electro-pneumatic movement of the scraper unit - Flat scraper unit - Buffing unit FP6810, 2 x 0.18 kW 200 Hz - Control type Power Control PC20+ - track control Brxoowkjfsw - Chain plate transport unit - Central lubrication - Extraction connection 1x120 mm, 3x60 mm, 1x100 mm - Producer Brandt - Type Optimat KDF 530 C - Year of construction 2008 - Right hand machine - Feed speed bis 11m / min, ohne Formfräser bis 14 m/min - Workpiecepre heating system - Joint trimming unit - Glue unit, granulate - End trim unit 0-15 Grad - Combination trimming unit flush/corner R 2 mm - Profil scraping unit - Buffing unit - Type of control Power Control PC20+ - Machine length ~ 4860 mm - Width der Maschine 900 mm - Höhe 1610 mm - Voltage 400 / 50 - Weight 1960 kg

Condition: excellent (used), Year of construction: 2009, CNC HOMAG OPTIMAT BMG 511 /60/12/F/K CNC WORKING CENTER (POINT TO POINT) 5 AXIS (DRIVE 5C +) CNC- controlled processing centre in moving gantry construction for trimming and drilling panels of wood or similar material. Prepared for 1 main spindle, mounted on the right side of the gantry beam. Numerical Control PC85 Software woodWOP E2Pnyyy Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 10 Table dimensions 1250 mm Clamps for workpieces fixing Pneumatic Kit powerClamp - clamping element - K Table Automatic Tools Changing System Tools storage plate (No. of folds-positions) 14 Max. useful working area (X-Y-Z) mm 6175 x 1550 x 300 No 2 Working areas Vacuum pump capacity m3/h 2 x 100 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes. Total installed power (50 A) WORKING GROUPS (TOP) No 9 Independent vertical boring spindles (High Speed 7500) No 4 Independent horizontal boring spindles (No. 2 in Xaxe + No. 2 in Y-axe) Drilling head motor-power 1,5 Kw No 1 Vertical electro-spindles HSKF63 DRIVE 5C +. Vertical electrospindles motor power (KW 10/12)

Condition: used, machine/vehicle number: 006901, X axis working area: 7400 mm Y axis working area: 1650 mm Working Table: Pod and Rail Bku3Vm7Mmwv Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 13 Total number of tool changer positions: 18

Condition: used, Year of construction: 2005, Used CNC machining center Homag BOF 612/34/13/2R year of construction 2005 2 x milling spindle 11 KW, 4-axis 2 x disk changer 10-fold 2 x drilling head 13 spindles, 9 vertical, 2+2 horiz. Machining dimensions - Workpiece length (X-direction) - max. 3440 mm with single occupancy, 1 spindle - max. 3740 mm with single assignment, 1 spindle with workpiece stop table outer edge - max. 1680 mm with pendulum loading, 1 spindle - max. 1830 mm with pendulum loading, 1 spindle with workpiece stop table outer edge - max. 800 mm with 4-fold assignment, synchronous machining - Workpiece width (Y-direction) Rqjsv9Oa For BOF./34/13/R - max. 1550 mm for milling with workpiece diam. tool diam. 25 mm - max. 1300 mm for all units - Machining and clamping of max. workpiece sizes according to technical data sheet - Workpiece thickness - max. 300 mm incl. clamping device - up to max. 60 mm with standard clamps without Restriction for units and extraction Equipped options - Automatic central lubrication - Power Pack for drives - 22 x stop bolts for grid table - 4-fold assignment - separate X-axis for 2nd main spindle

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Clamping table grid Raster groove exit tables: 2 pcs. Working height of grid table: 850 mm Grid dimension: 30 mm Groove width: 7 mm Rymz3Lglq2 Groove depth: 7 mm Distance between vacuum holes: 120 mm EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Feeding portal HOMAG Profi TBA370/40/16 Turning and alignment station

Condition: excellent (used), CENTRE HEIGHT MM 225 Mroj7 CENTRE DISTANCE MM 1500 GRINDIND DIAMETER MM 450 POWER REQUIREMENT 11 KW LUNETTEN AND ACCESSORIE LOOK FOTO

Mileage: 398,000 km, power: 375 kW (509.86 HP), first registration: 12/2019, overall weight: 18,000 kg, fuel type: diesel, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Condition: used, number of seats: 2, Equipment: ABS, air conditioning, central locking, cruise control, parking heater, power assisted steering, soot filter, traction control, trailer coupling, A1C Front axle 7‚5 t, A1Z Front axle‚ cranked version, A2I Rear axle‚ ring gear 485‚ hypoid‚ 13‚0 t, A5C Axle ratio i = 2‚733, B1B Electronic brake system with ABS and ASR, B1D Electronic compressed air supply unit‚ medium, B1F Heating‚ electronic compressed air supply unit, B2A Disc brake‚ on VA and HA, B3H Secondary water retarder, B4A Condensation water monitoring‚ for compressed air system, B4M Compressed air tank‚ steel, B5J Brake and electrical connections‚ low, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C5B Step plate over frame‚ Partial cover, C5D Access‚ behind cab‚ left, C6C Steering‚ 1-circuit, C6P Power steering pump‚ electronically controlled, C6Q Stabilizer‚ front axle, C7F Front underride guard (ECE)‚ aluminum, C7T integral rear, C8C rear axle mudguard‚ 2500 mm vehicle width, C8H 3-piece mudguard‚ with EC splash guard, C8I splash guard (EC)‚ front, C8M mudguard center section‚ low, C8Y underbody cladding‚ aerodynamic, C8Z side cladding‚ aerodynamic, D0A leather steering wheel, D0S compressed air connection‚ in cab, D0Z SoloStar Concept, D1C driver's swing seat‚ comfort, D2N seat back‚ unlocking‚ driver's seat, D3A comfort bed‚ top‚ wide‚ leveling, D3S seat cover‚ leather‚ driver's seat, D3T seat cover‚ velour‚ passenger seat‚ middle seat, D4T curtain‚ across in front of bed(s), D4X Sunblind‚ 2-piece‚ electric‚ windshield, D4Z Sunblind‚ side‚ driver and front passenger side, D5B Ambient lighting, D5Y Rubber mats‚ driver and front passenger side‚ front passenger seat‚ front passenger seat‚ front passenger seat, We are available by phone Monday - Friday until 20:00 and Saturday until 16:00!!! More:!!! Cmgwze0Kww Leasing/financing and trade-in possible!!! !! !! -Error and prior sale reserved!!! -All information without guarantee ... more on our homepage