Used Laboratory equipment for sale (31)

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 60704310, The Sanyo MIR-553 cooling incubator is equipped with a microprocessor control that works with very high precision. The machine works in combination with a heating and compressor system. The Sanyo MIR-553 has a very large storage capacity. This cooling incubator can be used in various sectors: Food industry, Water treatment or microbiology You can use this cooling incubator to incubate sample material at a desired temperature. You can also store other liquids or products at a certain temperature. Technical specifications Voltage: 220-240V, 50Hz Current: 2.4A Power: 600W Temperature range: -10°C to +50°C Coolant: R-134a Unslmbc7W Capacity: 406 L Weight: 205 kg Noise level: 45dB External dimensions (W) x (D) x( H): 80.5 x 92 x 181.5 cm Internal dimensions (W) x (D) x( H): 63 x 48 x 118 cm

Condition: good (used), Year of construction: 2009, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air Dqyjh2 -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 3 25°C/60%RH - A0431_00 - Year of construction: 2009 Climate chamber 4 30°C / 65% RH - A0432_00 - Year of construction: 2009

Year of construction: 2014, Condition: good (used), Millipore Flow Cxtometer Guava easy Cyte 8 HT year of manufacture 2014 regularly serviced .with PC and software Location Cologne Laboratory closure various equipment available , please request detail list 0Ui8O

Condition: used, The Thermo Scientific VT 6060 P-F vacuum oven is ideal for laboratory applications that require precise temperature and pressure control. With a maximum temperature of 230 °C and the robust S4B vacuum pump, this device is ideal for drying and material testing under vacuum conditions. The integrated precision manometers enable exact pressure monitoring. Sookenph3 - Additional components: - Display instruments: Precision manometer for vacuum control - Vacuum pump type: S4B (suction capacity: 4 m³/h, final pressure: 4 x 10⁻² mbar) Equipment: - Various hoses, cables and connection components Condition: Used, with slight signs of wear, functionally tested Manufacturer: Thermo Scientific (Heraeus Instruments) model/type: VT 6060 P-F Serial number: 96102734 * Max. temperature: 230 ° C * Tension: 230 V * Frequency: 50 Hz * Protection class: IP 20 * Max. power consumption: 20 W * Display instruments: precision manometer for vacuum control * Vacuum pump type: S4B (suction power Dimensions: 120 x 78 x 73 cm

Year of construction: 1996, Condition: used, Incubator with control up to approx 80 ° with about the internal dimensions 400 x 500 x 350 Fqy7Rbz

Condition: excellent (used), Shimadzu IR Prestige-21 infrared spectrophotometer and Infrared Microscope AIM-8800 Here we offer a Shimadzu IR Prestige-21 infrared spectrophotometer. Shimadzu IR Prestige-21 infrared spectrophotometer with Shimadzu infrared microscope AIM-8800 The IRPrestige-21 is designed for both high sensitivity and wide range applications in research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory range. Infrared Microscope AIM-8800 AIM-8800 Specifications Optics: 15 x Cassegrain lens 15 x Cassegrain capacitor mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range : Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Bod9Rxnngz Electrically activated iris XY Θ Directional drive. The setting of the XY directional increments is 1 µm above the sample surface and 1° -steps in Θ direction (numerical input possible). Minimum setting value: 3µm Motor driven XY sample table Positioning range: X axis: 70 mm; Y axis: 30 mm Resolution: 1 µm distance Sample thickness: reflection mode - ≤ 40 mm Transmission mode - ≤ 10 mm Operation from the main unit keyboard Selection of measuring mode / XY step operation (speed control in 4 steps) / manual focusing / illumination control (Optional) Control via PC selection of measuring mode / XY stage operation / automatic centering / manual focusing / automatic

Year of construction: 1996, Condition: good (used), machine/vehicle number: 3.41.6.0411, Hamo T420 cleaning and sterilizing machine APPLICATION For efficient cleaning of various materials and components such as glassware, vessels, filling equipment components and and other parts in the Biotechnology and Pharmaceutical Manufacturing Industry. DESCRIPTION - The l-lamo T-420 Pharmaceutical Washing Machine is equipped with a programmable PC controller control system. - Hamo Pharmaceutical Grade washing machines are designed, manufactured, validated, and documented to the latest GMP standards Nfatf - The washing machine offers up to 99 fully programmable cycles - Perform up to 99 different phases. - Menu Language German, can be switched Technical specifications: Model T-420 Instr. No 3411 Machine no. 3.41.6.0411 Voltage: 3x400 V 50 Hz Amps: 25 kW: 14.4 Year of construction: 1996 More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2005, Functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Dqyjgj Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Year of construction: 2015, Condition: excellent (used), Clean Air Workbench Heraguard HPH 15 Thermo Scientific Used Location Cologne Etffs0F regularly serviced Laboratory resolution various microscopes and other equipment gladly

Condition: used, For sale is a used Agilent Technologies 708-DS dissolution tester, model number G7910-64022 . This system is ideal for performing dissolution tests in pharmaceutical laboratories and research facilities. The device accommodates multiple samples simultaneously and is designed for precise, reproducible test results. It operates reliably with a power supply of 115/230V and a maximum current of 2.5A. Manufacturer: Agilent Technologies model/type: 708DS part number (P/N): G7910-64022 serial number (S/N): US1360830 Input voltage: 115/230 V frequency: 50/60 Hz Sncrnxjjg power consumption: 2.5 A Fuse: 2.5 A Origin: Made in USA

Condition: as good as new (ex-display), Sodium Chloride 35 Pack each one is 25 Kg Bivi3Nhkrlu

Condition: excellent (used), GABO EPLEXOR® table-top testing machine Here we offer you a GABO EPLEXOR® table-top testing machine. GABO EPLEXOR® 500 N Spectroscope 500 N / 1500 N static Dynamic Mechanical Analysis (DMA) EPLEXOR® Measurement of viscoelastic material properties as a function of temperature depending on temperature, frequency and mechanical load Test systems of the EPLEXOR® test systems enable the mechanical characterization of a wide range of different materials: from elastomers and polymers, to composites, metals, glasses, ceramics, biomaterials and foodstuffs, biomaterials and foodstuffs, to adhesives, plastic 0Fy0Vzgd masses and liquids. Applications include : DMTS/DMTA/DMA analysis of viscoelastic material properties dynamic material testing dynamic fatigue testing dynamic component testing rheology The method of dynamic mechanical spectroscopy (DMTS/ DMTA or DMA) uses forced, mechanical oscillations to deform the test specimens. The specimens can be loaded under tensile, compressive, flexural and shear stress. Specifications: EPLEXOR® 500 N benchtop systems Dynamic +/- 500 N force range (1000 N) Static force range 1500 N Dynamic elongation +/- 1.5 mm (3 mm) Optional: +/- 4 mm Static elongation up to 35 mm Frequency range 0.01 Hz - 100 Hz Optional: 0.001 Hz - 200 Hz Temperature: RT up to 500°C Optional: RT to 1000°C RT to 1500°C -150°C to 500°C Type: EPLEXOR® 500 N Condition: used / used Scope of delivery: (See picture) (Changes and errors excepted)

Condition: used, Polarimeter 243 Perkin Elmer Uofpg0Da Includes 1 used cell

Condition: good (used), Year of construction: 2009, Functionality: fully functional, Climate cabinet for stability tests TCS series climate cabinets are specially designed for storage and stability tests in the chemical-pharmaceutical industry. Test chamber volume: 1060 l Temperature range: 0 to +50 °C Humidity range: 20 to 95% r.h. Internal dimensions W x H x D in mm 610 (2x) x 1500 x 585 External dimensions W x H x D in mm 1460 x 2105 x 980 Vpzs7Bkng

Year of construction: 2012, Condition: excellent (used), CyBIO Felix 305015-100-24 Pipetting robot year of construction 2012 Iaxh3K3N

Condition: used, The Mettler Toledo RE50 refractometer is a reliable and high-quality solution for precise measurements in the laboratory. This used device impresses with its perfect condition and its robust construction. Thanks to its numerous connection options (RS232, AUX, external pump) and the proven quality of Mettler Toledo, the device is ideal for applications in the pharmaceutical, chemical or food industries. Manufacturer: Mettler Toledo model/type: RE50 refractometer Serial number: MYD10C44 Technical specifications: connection options Dqxh39 Origin: Made in Japan State: Second hand

Condition: good (used), Functionality: fully functional, For sale is a used water treatment system from ELIX type Essential 10 Description according to the manufacturer's website: Dqkejp Elix® Essential systems are suitable for laboratories that require an easy-to-use, economical solution for a constant and reliable supply of type 2 water. The patented Elix® electrodeionization technology, in combination with other coordinated water treatment technologies such as pre-treatment, reverse osmosis and irradiation with a bactericidal UV lamp (for Elix® Essential UV systems), produces type 2 pure water of consistently high and reliable quality. Thanks to Elix® modular technology, these systems do not require resin changes and therefore have low and predictable operating costs. Water quality: Type 2 Production volume: 200l/day

Condition: used, TECHNICAL DETAILS - Volume : 4.3 [l] - Timer : 0-120 [min] 9A8Dgb7 - Temperature setting : 0-100 [°C]

Condition: good (used), MANESTY ACCELACOTA laboratory coating turbine Perforated turbine with counter blades Spray arm Lfv0Mhzf For batch sizes of around 15kg

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, Climatic chamber for stability tests TCS series climatic chambers are specially designed for storage and stability tests in the chemical-pharmaceutical industry. Test chamber volume: 1060 l Temperature range: 0 to +50 °C Humidity range: 20 to 95% r.h. Dqyjc2 Internal dimensions W x H x D in mm 610 (2x) x 1500 x 585 External dimensions W x H x D in mm 1460 x 2105 x 980"

Year of construction: 2015, Condition: excellent (used), Skan fume cupboard workstation Do0Qat As we have many workstations of different brands and qualities, the indicated price is only a guide price! The new price for these units is between 19000-38000 €. We still have some of these workstations in stock. Please ask for the exact price. The pictures are only examples. The unit was in full use until it was removed! With our articles you have a 14 days exchange right. If a unit does not work you can return it to us and get your money back.

Condition: used, TECHNICAL DETAILS Br37Oxwaizy - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, overall weight: 1,200 kg, total length: 2,750 mm, total width: 1,350 mm, total height: 2,200 mm, Hosokawa Mikron Stott-High Containment Isolator CP-01: Highest protection and efficiency in the industry This system was operated in a teaching laboratory with placebo and little used! The Hosokawa Mikron Stott-High Containment Isolator CP-01 sets a new standard for the protection of employees and products in the pharmaceutical and chemical industries. This state-of-the-art high containment system is designed to meet stringent safety and product integrity requirements while providing maximum efficiency and flexibility. E2M2Pyq Key features and benefits: Maximum safety: the CP-01 isolator provides a reliable barrier between operators and potentially hazardous substances. With a highly sensitive monitoring system and robust safety features, it ensures maximum protection for operators. High-containment design: This isolator meets stringent requirements for cross-contamination prevention and protection from hazardous substances. This is crucial for the production of sensitive pharmaceutical products and chemicals. Modularity and adaptability: The CP-01 has been developed to adapt to different production processes. Its modular design allows easy integration into existing systems and adaptation to specific requirements. Efficiency and productivity: Thanks to its advanced technology, the isolator enables precise process control and minimizes material losses. This leads to higher productivity and cost savings. Ease of use: The intuitive user interface and ergonomic design make it easy to operate and monitor the isolator. This increases efficiency and reduces the risk of operating errors. Environmentally friendly: The CP-01 supports efforts to reduce CO2 in the industry by using resources more efficiently and minimizing waste. The Hosokawa Mikron Stott-High Containment Isolator CP-01 is the ideal choice for companies that need to meet the highest safety standards without compromising on efficiency. With its sophisticated technology and flexibility, it supports the production of quality products in a safe and controlled environment. For further technical information and individual advice, please contact our experts. The appliance was still in full use before it was removed! You have a 14-day exchange right for our products. If a unit does not work, you can return it to us and get your money back.

Condition: used, TECHNICAL DETAILS 8Dentrt - Max. heating bath temperature : 99.9 [°C] - Heating bath model : water/liquid bath - Heating bath volume : 14 [l] - Cooling : No

Condition: used, TECHNICAL DETAILS Cyr2Oqssmk - Magnification : W 10 x 21 B