Used mixer for sale (110)

Condition: used, Comprehensively tested, used Netzsch Max Shear 3 Inline disperser. Includes a stainless steel inline mixer with 76mm diameter slotted disintegrating head direct driven by 4 kW 3/50 2885rpm motor. Also includes double acting mechanical seal with 2.6 litre seal pot rated 10 bar at 60 deg.c. Mounted on stainless steel frame. Nwjdpjyc Tp Asfx Aahob

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Nwsdpfx Asyc Tppjahsb Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Nwjdpfxjyc Tpij Aahjb Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: used, Used IKA model DR 2000/30 ATEX stainless steel Dispax-Reactor. Maximum flow rated 4,000 l/h, Maximum viscosity 5000mPas (product independent). Driven by approximately 58kw electric motor. Includes frequency inverter. Nedsyc Tmzopfx Aahswb

Condition: used, Używany mieszalnik homogenizujący Becomix model RW30CD. Wykonanie ze stali ko. Pojemność robocza w zakresie 2-25 l. Górna pokrywa, wypukła, zamykana na klamry. Dolna dennica spawana, lekko stożkowa. Zbiornik przeznaczony do pracy na roboczym ciśnieniu do 29 psi (2 bar) przy temperaturze 273°F (133°C). Komora mieszalnika posiada płaszcz grzewczy ze stali ko, przeznaczony do pracy na ciśnieniu do 58 psi (4 bar), w zakresie temperatury od 41°F (5°C) do 306°F (152°C). Urządzenie posiada zamontowane od góry w mieszadło ramowe, napędzane przez przekładnię silnikiem el. W dolnej dennicy znajduje się homogenizator napędzany bezpośrednio silnikiem elektrycznym. Mieszalnik jest zamontowany w przejezdnej ramie ze stali ko. Maszyna została wyprodukowana na rynek USA. Nsdpfxsyaph Nj Aahowb

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Click on the link below to see a video of the machine running. Njdpfx Aoyanx Hoahewb

Condition: used, Comprehensively tested and refurbished, used Kemutec Kek model 200 EC 316 Stainless Steel Jacketed Ribbon/ High Speed Mixer. Manufacturer: Kemutec Material: 316 Stainless steel Capacity: 200 litre working capacity. 215 litre total capacity (product dependent) Mixing trough: 565mm diameter X 860mm long. Discharge Type: Centre bottom discharge with manual plug type valve Nsdpfxjyanxys Aahjwb Type Of Blades: Cantilever design with bolted double ribbon mixing blade Motor: 7.5 kw 400 volt 3/50 & 480 volt 3/60 11460 rpm motor via David Brown Radicon gearbox rated 15.5/1 Revolutions Per Minute: 53RPM Also includes: Hinged lid and end cover. -Spare double ribbon and t-arm mixing blades. -Provision for chopper but none fitted. -Stainless steel jacket rated 4.4 bar design pressure at 154.83 degc. -Internal rated atmospheric pressure at 50 degC. -Mounted on mobile base. A video of this mixer is available below. Specifications: Capacity: 200 L Material of construction: 316 Stainless steel Width: 565 mm Horsepower: 7.5 kW Length: 860 mm Jacket: Yes Jacket Pressure: 4.4 bar

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Nsdpfxeyanxte Aahowb Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Nwsdpfxeyanxgs Aahjb Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: used, GENERAL Speed: 720 / 1455 rpm Power: 11 / 16 kW Agitator: Jet stream mixer Other: Also sold with matching mixing tank, see #7442. Location: Bremen Nameplate: Product-contact material: V2A 1.4301 (AISI304) Condition: used AGITATOR Agitator manufacturer: Ystral Voltage: 380 Volt Agitator features: Motor housing with onset of corrosion Nwedsxqbu Ispfx Aahsb

Condition: used, GENERAL Speed: 205 RPM Impeller diameter: 540 mm Power: 2.2 kW Agitator: inclined blade agitator Location: Bremen Nameplate: Shaft diameter: 35 mm Shaft length: 680 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used AGITATOR Voltage: 400 Volt Agitator equipment: intermediate flange made of plastic Nwsdpfjxqbzhox Aahjb Agitator blades partially slightly bent

Condition: used, GENERAL Blade diameter: 200 mm Agitator: Propeller Location: Bremen Shaft diameter: 25 mm Product-contacting material: V4A 1.4571 (AISI316) Nwedjxqby Rjpfx Aaheb Condition: used AGITATOR Agitator manufacturer: Ekato Agitator equipment: Internal thread; Motor not included; Total length approx. 760 mm

Condition: used, GENERAL Speed: 725 / 1448 RPM Power: 7 / 10.5 kW Agitator: Jet stream mixer Other: Clamp device made of V2A stainless steel Stated shaft length from lower half of flange coupling to end of stator Stator diameter (top): approx. 310 mm Stator diameter (bottom): approx. 250 mm Total length: approx. 2,000 mm Location: Bremen Nameplate: Shaft diameter: 75 mm Shaft length: 940 mm Product contact material: V2A 1.4301 (AISI304) Nwodpfoxqbvxox Aaheb Condition: used AGITATOR Agitator manufacturer: Ystral Voltage: 380 V

Condition: used, GENERAL Nwsdpfx Aaoxqbvfehjb Speed: 730 / 1475 rpm Power: 3.5 / 13 kW Agitator: Jet stream mixer Other: Agitator incomplete Rotor (propeller) missing Stator diameter top approx. 350 mm Stator diameter bottom approx. 300 mm Location: Bremen Nameplate: Shaft diameter: 75 mm Shaft length: 600 mm Product-contacting material: V2A 1.4301 (AISI304) Condition: used AGITATOR Agitator manufacturer: Ystral Voltage: 380 Volt

Condition: used, Used LODIGE mixer Type M5R - Double jacket - Total volume : 5 litre - Useful capacity : 4 litre - Motor : 0.75 kw – Hp 1 – 220/380 volts - Variable speed Specifications: Bowl Volume: 4 gal Motor Power: 1 hp Jacket (Y/N): Y Nwjdpfxex Tifpe Aahob

Condition: used, Used Enrico Molteni model ED30 stainless steel disperser. Unit is driven by 22kw motor. Has stainless steel mixing pot with clamping section. Includes hydraulic powerpack for raise & lower. Njdpfx Aox Ticuoahowb

Condition: used, Testé de manière exhaustive, mélangeur à ruban en acier inoxydable de type Gardner d'une capacité de travail d'environ 400 litres (dépendant du produit). La cuve mesure environ 1650 mm de long x 550 mm de large x 700 mm de profondeur. L’unité est équipée d’un couvercle en acier inoxydable et inclut une vanne de vidange au fond. Specifications: Capacity: 14.1 ft³ Material of construction: stainless steel Width: 21.65" Length: 64.96" Njdjx Tichjpfx Aahjwb Dimensions: 64.96 x 21.65 x 27.56

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Nwodpfxex Tib Rs Aahsb Capacity: 10 litres Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: used, Used BCH stainless steel jacketed sigma mixer / extruder. Approximate working capacity 100 litre (product dependent) with maximum total capacity 250 litre. 304 Stainless steel mixing chamber measures approximately 720mm Long x 780mm Wide x 700mm Deep. Internal rated 100 mbar (90% Vacuum) design pressure at 150 deg.c. External 304 stainless steel jacket rated 6.8 bar design pressure at 170 deg.c. Has (2) 304 stainless steel Sigma blades driven by (2) 4kw motors with gearboxes. 304 Stainless steel screw discharge driven by 4kw motor with gearbox. Unit air operated hinged lid. Includes control panel. Nwedpfx Aajx Tibwjhob

Condition: used, GENERAL INFORMATION Speed: 965 rpm Impeller diameter: 320 mm Power: 7.5 kW Agitator: Propeller Location: Bremen Nameplate: Shaft diameter: 125 mm Njdpfx Aoyciv Eoahswb Shaft length: 500 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used AGITATOR Manufacturer: PRG Voltage: 400 V Features: 1 small dent in the fan cover

Condition: used, Used SILVERSON stainless steel in-line mixer Type 450L N° : C450L M642 Hp 10 – 3x 220/380 volts Nodpfx Aaex Ryvgjhowb

Condition: used, Used Molteni model MPME700SV-TDS stainless steel triple action vacuum mixer. Manufacturer: Molteni. Material: Stainless steel. Nwedpfsx Rytxjx Aaheb Capacity: Mixing pan approximately 700 litres. Type of blades: (1) high speed disperser driven by a 48kw motor, (1) high speed disperser driven by a 36.5kw motor and (1) anchor type agitator driven by a 18.5kW Exd rated motor. Also includes: Hydraulically operated raise and lower. For details about the refurbishment work, contact a member of our sales team. Equipped With: Per RD 28/08/25 on hold for potential inspection 24/09/25, 25/09/25 or 26/09/25.

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 316 stainless steel high speed ploughshare mixer. Material: Stainless steel Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter Discharge Type: Centre bottom pneumatically operated flap discharge value Type Of Blades: Ploughshare blades Motor: 11kw, 380-415 volt, 3/50, 1450-1460rpm motor through Custom Power Transmission gearbox type MO820 Revolutions Per Minute: 99rpm Also includes: (1) stainless steel side entry chopper driven by 4kw, 380-415volt, 2840-2870rpm, 3/50 motor. A video of this mixer is available below. Njdpex Rytrefx Aahewb Specifications: Bowl Volume: 105 gal Motor Power: 11 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 4kW RPM Of Choppers: 2840 - 2870 HP Of Unit: 11kW Revolutions Per Minute: 1450 - 1460 Vacuum Internal (Y/N): N Jacket (Y/N): N Jacket Pressure: N/A Jacket Temperature: N/A Weight: N/A Dimensions: 1,300mm long x 800mm diameter

Condition: used, Reportedly unused since refurbished Winkworth model 16Z-63 stainless steel z-blade mixer. Mixing trough measures approximately 400mm x 400mm x 350mm deep. All product contact parts in 316/316L stainless steel. Approximate capacity 27 to 36 litre working capacity (product dependent). (2) 316/316L stainless steel z-blades driven by 4kw, 3/50, 1464/37 rpm geared motor. Unit has stainless steel hinged vacuum rated hood/lid with clamps. External 304/304l stainless steel jacket rated 3.5 bar working pressure at 150 deg.c. Unit includes electrically actuated tilt discharge mechanism. Unit includes ICS Cool Energy Ltd model iC220 chiller. Has control panel for mixer and chiller operation. Nedpox Rytfofx Aahewb

Condition: used, Chemical Mixer, Stainless Steel Mixer, Chemical Mixer 2000 L, Used Machine Manufacturer: Chemplex Type: T240 Electrical power: Heating: 20 kW Mixer motor: 3 kW Weighing system: MS-h10/kn, MS-CT-SQB – maximum weighing capacity 3,500 kg Maximum heating temperature: 90 °C Capacity: 2,000 L Description: General-purpose chemical mixer manufactured by Chemplex with a 2,000-liter capacity, designed with an integrated tank weighing system (3 load cells with indicator). The vessel is an atmospheric tank with a DN100 bottom outlet. Njdpjyc Sfvsfx Aahewb Heating is provided by a 20 kW electric bottom heater. The mixer is equipped with a propeller-type agitator. It features a flat lid, which is openable and fitted with a safety grid. The lid includes 4 dosing/inlet nozzles. Recommended operating temperature: 20–60 °C. The bottom discharge nozzle is fitted with a stainless steel ball valve, equipped with a pneumatic actuator and bubble position indicator. The actuator is spring-loaded, providing a fail-safe (safety closed) function.