5-axis machining centre

Belotti FLU 2617

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Gisdoy H Epwspfx Acfeu Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t Gisdpfx Acohqqnzofou DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: used, functionality: fully functional, machine/vehicle number: 7085, Used universal cylindrical grinding machine Manufacturer: WMW Model: SU 315 x 1000 mm Equipped with internal grinding attachment Giedpfxewl A H Ds Acfou Maximum workpiece diameter: 315 mm Maximum grinding length: 1000 mm Grinding spindle speed: 1340 rpm Workpiece speed: 22–500 rpm Longitudinal table travel: 5–1680 mm Table feed rate: 0.05–5 m/min Maximum workpiece weight: 300 kg Connected load: 12.5 kW Machine weight approx.: 5.8 t

Year of construction: 1988, condition: as good as new (ex-display), machine/vehicle number: 1116/87, MANUFACTURER: ELTERMA/IPSEN MODEL: VDFC-413 DESCRIPTION: Vacuum tempering furnace YEAR OF PRODUCTION: 1988 STATUS: New unused, need revamping of the obsolete parts ( Cabinets ) Max Load Dimensions: 610x900x500mm Gisdpfxom E Tvho Acfsu Max Load Weight: 500 kg Working temperature: 150-750⁰C Approximate warm-up time of the vacuum chamber at 550 ° C for 30 minutes

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Gjdpfx Aotvar Iocfoiu

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm Godpfx Aevuuknjcfjiu table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Year of construction: 2002, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 10,000 rpm, Universal machining center Machine type: DMG DMC 340 U Giedex Uxc Tepfx Acfeu Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: good (used), Year of construction: 2014, machine/vehicle number: 9911832, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 10,600 mm, travel distance Y-axis: 1,570 mm, travel distance Z-axis: 740 mm, total height: 2,760 mm, total length: 11,900 mm, total width: 4,500 mm, overall weight: 10,500 kg, spindle motor power: 10 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 60 m/min, spindle nose: HSK F63, tool diameter: 20 mm, tool length: 150 mm, tool weight: 3,000 g, Equipment: chip conveyor, documentation/manual, MECAL MC302 GEOS-5 5-AXIS MACHINING CENTRE, manufactured in 2014 in Italy, is designed for milling, drilling, tapping, and cutting of profiles made from aluminium alloys and plastics. The machine, equipped with top-quality components and innovative solutions, can process both on a single workspace and within two separate working zones, which significantly increases speed and production efficiency. Simultaneous machining in two working areas is possible thanks to the longitudinal worktable with a sliding machining station and chip conveyor. The MECAL machining centre for aluminium profiles achieves high structural rigidity due to its base made from high-grade steel tubes. During operation, the profile is held in place by special clamps with an independent power supply system, allowing for positioning and automatic repositioning of each individual clamp in a very short time. All 5 axes (X, Y, Z, A, C), driven by motors with digital systems, move along automatically lubricated precision guides. The MECAL GEOS-5 machining centre is offered with 3D software, providing a high level of programming flexibility, user-friendly operation, and an intuitive graphical interface. Technical specifications of the MECAL MC302 GEOS-5 profile machining centre: - Number of axes: 5 (X, Y, Z, A, C) - Y/Z axis travel: 1570/740 mm - Spindle tilt (A axis): ±120° - Spindle rotation (C axis): ±210° - Rapid traverse (X/Y/Z axis): 70/60/40 m/min - 3D graphical software - Tool magazine capacity: 18 - Maximum electrospindle speed: 24,000 rpm - Electrospindle power: 12 kW - Maximum blade diameter: 500 mm - Maximum diameter of side and end mill: 200 mm - Centralised lubrication Gsdpeu Dl R Uefx Acfjiu

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm Gijdpfx Acjvuukuefsu table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: used, Year of construction: 1987, pressure 40 t Gijdpfevu E Iwox Acfou no. of strokes 500 Hub/min total power requirement 5,5 kW