Milling machine

Abene VHF 3

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 6770, travel distance X-axis: 715 mm, travel distance Y-axis: 275 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 44 rpm, Abene VHF 3 milling table Abene VHF-3 Gedpfx Ahjywk R Ijdebu Table size: 1200×320 mm Longitudinal travel: 715 mm Cross travel: 275 mm Vertical travel: 500 mm Spindle speed: 44-2000 rpm Automatic feed in X, Y, and Z axes

Condition: excellent (used), Year of construction: 2010, feed length X-axis: 650 mm, feed length Y-axis: 500 mm, feed length Z-axis: 475 mm, feed rate X-axis: 6,000 m/min, feed rate Y-axis: 6,000 m/min, feed rate Z-axis: 6,000 m/min, table width: 450 mm, table length: 1,530 mm, X-Axis: 650mm Y-Axis: 500mm Gjdpfxextmqtj Ahdsbu Z-Axis: 475mm Table Length: 1530mm Table Width: 450mm Table load: 350 Spindle speeds: 55 - 4000Rpm Feed rate X-Axis:6000mm/min. Feed rate Y-Axis:6000mm/min. Feed rate Z-Axis:3000mm/min. Length: 2300mm Width: 2550mm Height: 2200mm Weight: 2850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, year of last overhaul: 2026, Drill grinding machine suitable for grinding/sharpening twist drills, countersinks, etc. with 2, 3, or 4 cutting edges, with diameters from 5 to 75 mm. The machine has been mechanically and technically overhauled, wearing parts replaced, grinding spindle new, newly painted. The machine features automatic feed including end stop. Godpfoydc Htex Ahdebu Accessories: - Reducing sleeves MK5/MK4/MK3/MK2/MK1 including new quick-action chuck for small diameters - Diamond dresser - Operating manual - Ejector tool for MK5 to MK1 - Coolant system, new including new coolant pump - Machine LED light, new The machine can be tested under power or inspected upon request. Operating voltage: three-phase current

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 Gsdpfx Aoxqc H Sjhdsbu - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: P40030, Used Harrison Alpha 460 Plus Gap Bed with 460mm swing x 1000mm between centres. Spindle bore 76mm. Equipped with Harrison/Fanuc GE Operator panel and screen. Very popular CNC Lathe. Specification Harrison Alpha 460plus Gbjdpjnxkcqjfx Ahdsu Height of centres 230mm Distance between centres 1000mm Swing over bed 460mm Swing over cross slide 270mm Swing in gap 730mm Gap width from faceplate (approx) 216mm Spindle bored to pass 76mm Spindle speeds: Low range 2 to 500rpm High range 20 to 2000rpm Tailstock travel 145mm Tailstock diameter 95mm Tailstock taper No. 6 MT Approximate weight 2760kg Harrison Alpha 460 Plus Gap Bed CNC Lathe with Fanuc Machine equipped with 3 jaw chuck Quick change toolpost and 4 off toolholders Harrison/Fanuc GE operator panel and screen Stationary steady Guarding Lighting Coolant system

Condition: used, CNC milling machine ABENE, Type VHF-360TI Serial No. 36084 Year of manufacture 2008 CNC control HEIDENHAIN TNC 320 Travel ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle mount SK 40 Spindle speed 55 - 3000 rpm, 2 speeds Feed rate 30 - 4000 mm/min, stepless Rapid traverse rate (X + Y-axis) 4000 mm/min. Rapid traverse rate (Z-axis) 2000 mm/min. Distance spindle nose to table 20-495 mm Motor power spindle drive 7.5 kW Power supply 400 Volt, 50 Hz - CNC path control HEIDENHAIN TNC 320 with interfaces RS232, USB and LAN - Electronic handwheel for X, Y and Z axis - Mechanical handwheels for X and Y axis - Spindle speed can be manually switched with 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with side-mounted, swiveling spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric coolant pump located beside the machine - Machine light - Control cabinet firmly attached to the machine - Operating hours read on control system when switched on = 14780 hrs. - Operating hours read on machine when switched on = 12980 hrs. Gsdjty A Ehepfx Ahdjbu - Operating hours read on program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: used, Year of construction: 1992, spindle diameter 130 mm x-travel 3500 mm y-travel 2500 mm z-travel 1250 mm w-axis 800 mm b-axis 360 ° spindle turning speed range 1000 U/min transmission ratio 4 Control Heidenhain type 355 Godpfx Aeyqti Ejhdebu table surface area 1800x2200 mm Table load 12000 kg spindle taper ISO 50 width of T-slots 22 mm T-slot - distance 160 mm Feed 1-6000 mm/min total power requirement 80 KVA weight of the machine ca. 36 t dimensions of the machine ca. 7,7x7,2x4,9 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1983, Stock number: 2965-3 Manufacturer: WEDEVAG Year of manufacture: 1983 Machine number: 000115/83 Type / Model: WL 2 Grinding wheels: 203 x 10 x 32 mm Point angle: 60 to 180° Diameter: 2.5 to 20 mm Speed: 2,800 rpm Dirty air requirement: approx. 5 bar Equipment: Base cabinet with extraction system Extraction system: SKF Tools Gbodpev U Agkjfx Ahdsu Type: ADT 12 Floor area: 500 x 600 mm Table height: 500 mm Accessories/equipment: Condition: Good Complete weight: 170 kg Dimensions: 500 x 600 x 1,400 mm

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display Gbedpfxjr Hbf Tj Ahdeu >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: excellent (used), Table 1,200 x 450mm, X 560 Y 510 Z 450. ISO 40 4,000Rpm, Heidenhain TNC 410 Gsdpfey S T Tnox Ahdjbu