Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm Prjdpfev U Dluex Ah Dja dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Year of construction: 2004, condition: used, cutting range 90°: 90 mm cutting range 45°: 75 mm Saw blade diameter 315 mm Predpfx Ajd Ih Nksh Dea Table dimensions 800 x 500/400 mm Saw blade 30 mm machine weight ab. 45 kg dimensions 850 x 600 x 430 mm

Condition: used, Year of construction: 2017, The SD 500 industrial double-head saw with a hydropneumatic feed system for the cutting discs is a machine model with cutting discs that extend from below. As standard, the left head is fixed. The right head is mobile and is moved using a highly precise servo drive. The cutting length readout is completely independent of the drive for the mobile head. The machine is equipped with fixed stops for angles of 45º and 90º. Intermediate angles can also be achieved. Both heads are equipped with main vertical and horizontal clamping devices. The discs, set at an angle of 45º inwards, eliminate the need for corrections. Because the cutting discs extend from bottom to top and the main vertical clamping devices act on the profile at the point of its highest stiffness, the profile does not bend in the housing groove. This ensures that both the angles and planes are maintained, with the additional support of the horizontal clamping device. The machine's operation is controlled via an independent control panel equipped with a DELL PC. Standard equipment: independent control panel with a PC cutting length readout independent of the head drives (from a magnetic strip) electronic positioning of the mobile head automatic machine zeroing cutting of 2 to 4 profiles simultaneously discs extending from below in a / \ arrangement, eliminating the need for corrections hydropneumatic feed system for the cutting discs Psdpeznuk Rjfx Ah Dora triple vertical and horizontal pneumatic clamping pneumatic adjustment of the disc extension angle (90°-45°) spacer between the heads, applied manually 4 outlets for industrial extraction, Ø100mm cooling system cutting length: min 300mm, max 3300mm roller guide at the mobile head, 3000mm

Condition: used, Year of construction: 2005, We offer this used Dubus PVC 9001 cutting and machining center, manufactured in 2005. Prjdpfx Ahozk Ep Ae Dja Type: PVC 9001 Serial number: 2606 Year of manufacture: 2005 Month of manufacture: April If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2008, input voltage: 380 V, type of input current: three-phase, input current: 8 A, We are offering this used elumatec EV 884 corner cleaning machine, manufactured in 2008. Type: EV 884 Serial number: 88009009 Rated voltage: 380 V Frequency: 50 Hz Number of phases: 3-phase Rated current: 8 A Date of manufacture: 28.11.2008 If you have any questions or require further information, please do not hesitate to send us a message or call us. Pedozk Eahjpfx Ah Djra

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. Pjdpfxszlpabo Ah Djra A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, For sale: ROTOX ZSA 263 automatic profile cutting machine, year of manufacture 2012. The machine is in working condition, regularly used, and available for inspection and testing by prior appointment. Prsdpfoy Sk Amsx Ah Doa Main features: - CNC control system - Cutting angles: 45°, 90°, and 135° - Pneumatic profile clamping - Automatic profile feeding - Right and left side material transport - Suitable for automatic cutting of PVC profiles The ROTOX ZSA 263 is a reliable and high-performance industrial machine, ideal for companies involved in window and door manufacturing. For more information or to arrange a viewing, please feel free to contact us.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Max. workpiece width: 180 mm MACHINE DETAILS Main motor power: 4.0 kW Prjdpsy Tnitjfx Ah Doa Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Podpfx Aeu Nif Tsh Dora Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Pedpfjzlnxisx Ah Dora Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Year of construction: 2019, condition: as good as new (ex-display), Complete PVC Window Line 60 Windows Consisting of: Double Mitre Saw DS-110/3.5M Predpoux Aqsfx Ah Dea End Miller AKF-210 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Two Head Welder WSA-2 LV, 0.2-2.0mm restrictions Glazing Bead Cutting Saw GLSP-200E with stop system

Year of construction: 2018, condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Pedpfxsuxxxs Ah Dsra Support for measuring stops 3.0m

Year of construction: 2017, condition: as good as new (ex-display), Complete PVC Window Line 30 Windows Consisting of: Mitre Saw GS-400/M with length stops Predpfjux Adsx Ah Dsa End Miller AKF-210 Sight surface groover 7405 Handle Drilling and Routing Machine KF-130S with self centring Waterslot Drainage Router SK-8/3 Single Head Welder WSA-1E, 2.0mm restrictions Glazing Bead Cutting Saw GLSM-200E

Year of construction: 2021, condition: new, Automatic Screw Unit SE1 SA With automatic screw feeding Prsdjuxyuspfx Ah Doa Head only bench mount,...

Year of construction: 2021, condition: as good as new (ex-display), Automatic Double Screw Unit SE5 S With automatic screw feeding Psdpfx Asuxyyjh Dora Head only bench mount Automatic working operations Depth stop control,...

Year of construction: 2020, condition: as good as new (ex-display), Glazing & Control Press VK-3522 Predpfsuxy Ejx Ah Dea Adjustable height pneumatic 500 mm Clamping height: 2.200 mm, Clamping width: 3.000 mm Pneumatic clamping press beam Clamping pads: 120 mm width L= 3.900 x W= 1.050 x H= 2.500 mm

Year of construction: 2005, operating hours: 14,300 h, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, controller manufacturer: AMADA, controller model: AMNC-F (FANUC 180i-PB), overall weight: 18,000 kg, total height: 2,318 mm, punching force: 20 t, product length (max.): 5,526 mm, sheet thickness (max.): 3 mm, table width: 5,120 mm, number of axes: 5, This 5-axis AMADA EM 2510NT turret punch press was manufactured in 2005. It features a punching force of 200 kN, a turret capacity of 45 stations, and a maximum sheet size of 1270 × 5000 mm. The machine has a rapid traverse speed of 100 m/min on the X-axis and 80 m/min on the Y-axis. If you are looking to get high-quality punching capabilities, consider the AMADA EM 2510NT machine we have for sale. Contact us for further details. • X-axis rapid traverse: 100 m/min • Y-axis rapid traverse: 80 m/min • Maximum sheet size: 1270 × 5000 mm • Maximum material thickness: 3.2 mm mild steel • Maximum sheet weight: 50 kg (feed speed F1) / 150 kg (feed speed F4) • Positioning accuracy: ±0.07 mm • Turret capacity: 45 stations • Turret rotation speed: 30 rpm • Punching force: 200 kN • Hits per minute – 1 mm pitch (5 mm stroke): 780 hits/min • Hits per minute – 25.4 mm pitch, X-axis: 500 hits/min • Hits per minute – 25.4 mm pitch, Y-axis: 330 hits/min • Maximum stroke length: 37 mm • Connected load: 27 kVA • Air consumption – machine: 250 l/min • Air consumption – Air Jet vacuum: 250 l/min • Operating air pressure: 5 bar • Tooling visible in the photos Prodpfx Ahoy S A Tks Doa • 4 tool cabinets • Technical documentation (manual scan) • Machine + included tooling package shown in the photos • Machine fully operational: Yes (replacement of one pneumatic hose required to eliminate a minor air leak) • Machine connected to power: Yes

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours Podpfx Aoy Nnnneh Dsra If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Corner notching machine URBAN SV530 4B with turning station and transport system. The direction of travel is from left to right. Prodpfx Ahozfvguj Doa Fully equipped tool heads at the top and bottom for processing all door and window profiles.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. Predpfx Ahezfvf Ro Doa The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times.

Condition: good (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 500 mm, Double mitre saw Pertici 500F2K, capable of double cuts, saw blade diameter 500 mm, positioning via machine control, Pedpfx Aozfmkweh Dsra horizontal and vertical clamping units, seal holder.

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Welding dimensions: 2600 x 3000 mm Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Suitable for welding entrance doors. Prsdezfky Nspfx Ah Dja Penetration depth: 6.0 mm Operation via PC Jetter (Dell PC conversion kit)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 380 V, pressure: 8 bar, For sale: URBAN SV 430 PVC profile processing center Corner cleaning machine Professional processing center from the renowned German brand URBAN, specially developed for the efficient processing of PVC window and door profiles. Technical specifications: - Brand: URBAN - Type: SV 430 - Year of manufacture: 2007 - Serial number: 430152 - Power supply: 230/400 V – 50/60 Hz - Power: 2.5 kW - Current consumption: 3.5 A - Max. working pressure: 8 bar - Weight: approx. 1,350 kg - Control: Ferrocontrol CNC control Features: Pjdjzcmg Iopfx Ah Dera - Suitable for various processing operations on PVC profiles - Robust industrial design - User-friendly operation via CNC control - Includes infeed and outfeed tables - German top quality, built for years of reliable use The machine is in very good condition and comes from a professional production environment. Ready for immediate use. Price: upon request For more information, photos, or to arrange a viewing, please feel free to contact us.

Condition: used, CNC Profile Processing Line, consisting of: 1) 1-Axis CNC Cutting Centre – Pertici SC55, Year 2018 The Pertici SC55 is a 1-axis CNC cutting centre designed for the automatic cutting of PVC profiles. Thanks to its automatic loading system, the machine automatically feeds the bars, performs the cutting operations according to the production list, and unloads the finished workpieces. The Pertici software is compatible with the main optimization and production management programs available on the market. The automatic magazine can accommodate up to 10 bars with a maximum length of 6.6 metres. The cutting area is fully enclosed by protective guards, ensuring maximum operator safety and easy maintenance access. The machine is also equipped with an automatic chip and scrap evacuation system, automatic unloading of finished parts, and a collection table with a capacity of up to 12 workpieces. Main Features 1-axis CNC controlled cutting centre Automatic cutting of PVC profiles Automatic loader for up to 10 bars Maximum bar length: 6,600 mm Automatic bar detection system Compatible with the main optimization and production software Automatic unloading of finished parts Automatic chip and scrap extraction Fully enclosed safety guards with front access Collection table for finished parts Cutting Angles The SC55 automatically performs cuts at: 45° 90° 135° (Intermediate angles available as an option.) Predjzg Eggopfx Ah Dsa Cutting Capacity SC55 (Ø500 mm saw blade) Maximum profile height at 90°: approx. 155 mm Maximum profile height at 45° / 135°: approx. 155 mm Maximum profile width: approximately 160 mm Minimum workable profile width: approx. 25 mm Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg 2) CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 390701, For sale: a two-head welding machine, URBAN model AKS 3900. The machine is in perfect working order. It was used in a single-shift production environment. Year of manufacture: 2021. Purchase invoice date: 2022. Pedszd Ra Tjpfx Ah Dora