Used Multi blade saws for sale (217)

Condition: excellent (used), CATALOGUE NUMBER 7653 Technical data: - track width 240mm - shaft width 260mm - max. blade diameter 300mm - blade hole diameter 70mm - max. cutting height with blade 350/400, 100mm - table top width with clearance 750mm - table top length 1530mm - from above: - pawls/deflectors - pulling shaft, toothed - pawls/deflectors - shaft with saws - sliding, pressure roller - from below: Lolhcswmq Swodwyjhg - guide - pawls/deflectors - caterpillar - feed motor 2.4kW - main motor 22kW - diameter of the extraction nozzle 2x160mm - overall dimensions l/w/h 2000x1530x1720mm - weight about 2080kg Net price: 23900 PLN Net price: 5630 EUR depending on the price of 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Outfeed table for multirip saw witich floating blade Raimann DTF Lelhcji Hlgxodwyohg

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Lholhstwy Iuscdwyjg Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - track width 250mm - shaft width 250mm - max. blade diameter 400mm - blade hole diameter 70mm - max. cutting height 120mm - table top width with clearance 810mm - table top length 1780mm - from above: - pawls/deflectors - smooth pressure shaft - pawls - smooth pressure shaft - shaft with saws - smooth pressure shafts 2pcs - from below: - guide - pawls/deflectors - caterpillar - central lubrication - smooth feed speed adjustment - feed motor 1.1kW Lelhcdswmqppjwyshg - main motor 37kW - manual lifting of the body - manual lifting of the shaft with saws - diameter of the exhaust nozzle 200mm - overall dimensions length/width/height 2150x1480x1760mm - weight 1735kg ADVANTAGES - German production - smooth regulation of the feed speed - used multi-saw, very good condition Net price: PLN 46,900 Net price: EUR 11,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7654 Technical data: - track width 300mm - working width of the shaft 300mm - max. disc diameter 340mm - disc hole diameter 70mm Lslhcjwmp S Njdwyehg - max. cutting height 120mm - table width with extension 750mm - table length with extension 1540mm - from above: - pawls/deflectors - sliding roller, metal, pressure - pawls - sliding roller, metal, pressure - shaft with saws - 2 smooth sliding rollers, metal, pressure - from below: - guide strip - pawls/deflectors - caterpillar - central caterpillar lubrication - smooth feed speed adjustment on the inverter - feed motor 1.1kW - main engine 18.5kW - diameter of the exhaust port 200mm - overall dimensions length/width/height 2250x1370x1450mm - weight about 1900kg ADVANTAGES - Italian production - very good condition - used multi-saw Net price: PLN 38,900 Net price: EUR 9,150 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7413 TECHNICAL DATA - track width 300mm - shaft width 300mm - max. disc diameter 350mm - disc hole diameter 70mm - max. cutting height 110mm - min. element length (without insert for short elements) 800mm - insert for short elements - laser * from above - 2 rows of pawls - smooth pressure, sliding shaft - shaft with saws - smooth pressure, sliding shaft * from below - guide - pawls - caterpillar - 2 types of feed speed + smooth - main engine 30kW - central lubrication - table top dimensions 1520x750mm Lhslot N Tzdehcdwyeg - diameter of the exhaust port 210mm - dimensions length/width/height 1930x1520x1800mm, weight 1678kg – Italian production – insert for short elements, laser – used multisaw, very good condition Net price: PLN 52,000 Net price: EUR 12,230 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7447 TECHNICAL DATA - max cutting height 150mm - max cutting width 510mm - max saw diameter 450mm - blade bore 70mm - shaft diameter 70mm *from above: - pawls - 2 smooth, slipping shafts - slipping shaft, smooth *from below: - 4 smooth, slipping input rollers - toothed pulling shaft - shaft with saws - toothed pulling shaft - 4 smooth, slipping output rollers - smooth feed speed adjustment - feed motor approx. 3kW - main motor 37kW - diameter of the extraction nozzle 150mm - overall dimensions L/W/H 3900x1750x1500mm - weight 1400kg ADVANTAGES - Polish production - DTR documentation - used multisaw, very good condition Lhjlsug Ul Rehcdwyjg Net price: PLN 24,900 Net price: EUR 5,850 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), FOD BYDGOSZCZ* DPPA III 50E 620/120 multi-shaft saw Catalog number 7407 TECHNICAL DATA - max cutting height 120mm Lslhjurkdzocdwyjhg - max element width 700mm - working width of the shaft with saws 620mm - max saw diameter 450mm - disc hole diameter 90mm from above: - pawls - 2 pulling shafts, toothed from below: - pawls - 2 pulling shafts, smooth - shaft with saws - pulling shaft, smooth - 2 types of feed speeds - 4.4kW feed motor - 30kW motor - machine dimensions length/width/height 2370x1400x1800mm - weight approx. 3000kg – Polish production – used machine, very good condition good Net price: PLN 42,900 Net price: EUR 10,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names only for informational purposes, enabling the identification of the product. We only resell goods that the manufacturer has previously introduced to the market. We do not have any business relations with the manufacturer.

Condition: excellent (used), Catalog number 7316 TECHNICAL DATA - track width 350mm - working width of the shaft with saws 355mm - max. blade diameter 450mm - max. cutting height 170mm - blade hole diameter 70mm - table top dimensions 1850x790mm from above: - pawls - 2 sliding shafts, smooth, metal - shaft with saws - 3 sliding shafts, smooth, metal from below: - guide bar - pawls - track - pulling toothed shaft, metal - central lubrication, electric - smooth regulation of feed speed - electric lifting of the body up/down approx. 1kW - feed motor 2.2kW - main motor 75kW - overall dimensions L/W/H 2600x1800x1700mm Lelhcdetk Rw Newyohg - weight 2700kg - used multisaw - very good condition Net price: PLN 68,900 Net price: EUR 16,200 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7652 Technical data: - track width 350mm - cutting width 370mm - disc diameter from 400 to 450mm - cutting height for 350/400mm disc, 160mm - spindle diameter 70mm - table top dimensions 1850x800mm - height from base to table top 750mm - from above: - pawls/deflectors - 2 sliding shafts, smooth, metal - shaft with saws - 3 sliding shafts, smooth, metal - from below: - guide bar - pawls/deflectors - caterpillar - pulling, toothed, output shaft - electric body height adjustment - central lubrication - smooth speed regulation on the inverter - motor feed 2.2kW - main engine 55kW - diameter of the exhaust nozzle 200mm - overall dimensions length/width/height 2560x1700x1900mm - weight 2700kg ADVANTAGES - German production - DTR documentation - used multi-saw - very good condition Lelhewmfqhscdwyohg Net price: PLN 39,900 Net price: EUR 9,390 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7213 TECHNICAL DATA - max cutting height 180mm - track width 400mm - shaft width 370mm - shaft diameter 60mm - max disc diameter 300mm - disc hole diameter 80mm - min. element length 630mm Lhjlhcdoqy H Euswyog - max. element width 600mm from above: - pneumatic clamp - pawls - metal pressure shaft 2pcs - pawls - shaft with saws - smooth pressure shaft - pawls - smooth pressure shaft from below: - metal, pulling, toothed shaft 2pcs - pawls - caterpillar - shaft with saws - caterpillar - smooth feed speed regulation on the inverter - main motors 2x55kW - 4kW feed motor - hydraulic lifting of the body up/down - hydraulic adjustment of the shafts with saws - 0.37kW pump motor - central lubrication - diameter of the exhaust port 1x300mm, 1x380mm - dimensions length/width/height 3200x2350x2000mm - weight about 5500kg ADVANTAGES - Italian production - two-shaft - used multi-saw, very good condition Net price: PLN 238,900 Net price: EUR 56,190 Net price calculated according to the exchange rate of PLN 4.25/EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width 340mm - shaft width 360mm - disc hole diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - pulling shaft, toothed, pneumatically pressed - 2 rows of deflectors - 3 sliding, smooth pressing rollers Lholhcdev Ed Uwjwyeg - deflectors - shaft with saws - 3 sliding, smooth pressing rollers - deflectors * from below - pulling, toothed input shaft - caterpillar - shaft with saws - caterpillar - smooth feed speed adjustment on the inverter - 2x55kW main engine - 4kW feed engine - electric lifting of the upper body up/down - electric adjustment of the shafts with saws - central lubrication - diameter of the exhaust nozzle 2x150mm - dimensions length/width/height 2800x2400x1900mm - weight about 5000kg ADVANTAGES - Italian production - two-shaft - ideal for large elements - used multi-saw, very good condition Net price: PLN 145,900 Net price: EUR 34,300 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6650 TECHNICAL DATA - max cutting height 200mm - track width 450mm - shaft width 450mm - disc hole diameter 80mm - shaft diameter 60mm - min disc diameter 250mm - max disc diameter 350mm - max cut width 870mm - min cut length 1500mm from above: - pawls - pulling shaft, toothed, metal - pawls - pulling shaft, toothed, metal - pressure - shaft with saws - 2 pulling shafts, metal, pneumatically pressed from below: - guide - metal, sliding roller - pawls - caterpillar - shaft with saws Lslhcdslrvguowyohg - caterpillar - smooth adjustment feed speed on the inverter 4-40m/min - main motors 2x75kW - feed motor 3kW - electric lifting of the body up/down 0.55kW - electric adjustment of shafts with saws 2×0.25kW - central lubrication - diameter of the extraction nozzle 2x300mm - dimensions L/W/H 3100x2600x2000mm - weight approx. 6500kg - Centering device included - toothed pulling rollers 3pcs - smooth pulling rollers 8pcs - motor 2×1.5kW - pneumatic top pressure - side pressure - dimensions L/W/H 4850/1100/1800mm - weight approx. 1000kg ADVANTAGES - production Czech - two-shaft - centering device - DTR documentation - year of production 2010 - used multi-saw, very good condition Net price: PLN 272,900 Net price: EUR 64,200 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height 140mm - table top width with clearance 730mm - table top length 2130mm Ljlhsqzhiqscdwyshg from above: - pawls - pressure, sliding shaft - pawls - pressure, smooth shaft - shaft with saws - smooth, pressure shaft 4pcs from below: - sliding, smooth shaft - pawls - caterpillar feeding table + guide strip - roller width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm outfeed table - 8 pulling rollers - roller width 800mm - total dimensions length/width/height 4400x980x880mm - central lubrication - electric lifting of the body up/down 0.55kW - electric adjustment of the shaft with saws 0.55kW - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1kW - main motor 30kW - diameter of the exhaust nozzle 210mm - total dimensions of the multi-saw length/width/height 2520x1870x2000mm + control - total weight approx. 2500kg ADVANTAGES – German production – large cutting height – feed and receiving table – multi-saw used, very good condition Net price: PLN 99,900 Net price: EUR 23,500 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: excellent (used), Catalog number 7446 TECHNICAL DATA - track width 340mm - shaft width 400mm - max. disc diameter 350mm - disc hole diameter 80mm - max. cutting height 120mm - table top width with clearance 700mm - table top length 1720mm *from above: - pawls - metal sliding pressure shaft - pawls - metal sliding pressure shaft - shaft with saws - metal sliding, pressure shaft 2pcs *from below: - guide bar - metal sliding shaft - pawls - caterpillar - central lubrication - smooth feed speed adjustment 1.5kW - main engine 37kW - diameter of the exhaust port 240mm - total dimensions length/width/height 1900x1750x1980mm - weight about 3000kg ADVANTAGES - German production - smooth speed regulation - insert for short elements - used multi-saw, very good condition Net price: PLN 89,900 Net price: EUR 21,140 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) Lslhcoug Ulqedwyohg

Condition: excellent (used), CATALOGUE NUMBER 6524 TECHNICAL DATA - track width 360mm - shaft width 350mm - max. disc diameter 350mm - disc hole diameter 80mm - max. cutting height 120mm - table top dimensions 2040x840mm from above: Lolhcdshx N Tmewyshg - pawls - pulling, toothed shaft - pawls - smooth sliding shaft - shaft with saws - sliding, pressure shaft from below: - 2 rollers in front of the table - guide - pawls - caterpillar - central caterpillar lubrication - electric lifting of the shaft with saws 0.55kW - electric lifting of the body 0.55kW - smooth adjustment of the feed speed - diameter of the extraction nozzle 140,125mm - main engine 45kW - overall dimensions L/W/H 3530x2220x2200mm - weight approx. 4000kg ADVANTAGES - Czech production - 2 sliding rollers in the table - used multi-saw - very good condition Net price: PLN 38,500 Net price: EUR 9,050 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER 6591 TECHNICAL DATA - max cutting height 250mm - track width 450mm - shaft width 450mm - disc hole diameter 80mm - shaft diameter 60mm - min disc diameter 300mm - max disc diameter 400mm - max input material width 860mm - min length of processed material 1500mm * from above - deflectors - 2 pulling shafts, toothed, metal, pneumatically pressed - deflectors - pulling shaft, toothed, metal, pneumatically pressed - clamp - shaft with saws - clamp - 2 pulling shafts, toothed, metal, pneumatically pressed * from below - metal, sliding roller - guide - deflectors - caterpillar - shaft with saws - caterpillar - smooth regulation of feed speed on the inverter 4-40m/min - main motors 2x75kW Leljlrvgishcdwyohg - feed motor approx. 3kW - electric lifting of the body up/down 0.55kW - electric regulation of shafts with saws 2×0.18kW - central lubrication - diameter of the exhaust port 2x300mm - dimensions length/width/height 3400x2650x2200mm - weight approx. 7500kg ADVANTAGES – Czech production – two-shaft – DTR documentation – used multi-saw, very good condition Net price: PLN 285,900 Net price: EUR 67,200 Net price calculated according to the exchange rate of PLN 4.25/EUR (with larger exchange rate fluctuations price may change)

Condition: excellent (used), Catalogue number 6809 Lolhcdwslrvg Ajyehg TECHNICAL DATA - track width 350mm - shaft width 370mm - max cutting height 200mm - max disc diameter 300mm - disc hole diameter 80mm from above: - deflectors - pressure sliding shaft - deflectors - 2 smooth sliding shafts - deflectors - shaft with 75kW saws - 3 smooth sliding shafts - deflectors - smooth sliding shaft from below: - sliding roller - deflectors - track - shaft with 95kW saws - track - 1 output shaft, toothed, pulling - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the body upper top/bottom 1.1kW - automatic central lubrication - smooth regulation of feed speed 3kW - diameter of the exhaust nozzle 190mm, 200mm - feeding table with guide and pneumatic clamp rollers in the feeder: - 1 sliding, 9 pulling - dimensions of the feeder length/width/height 6520x1300x1050mm - dimensions of the machine length/width/height 2850x2410x2170mm - total weight approx. 8000kg ADVANTAGES - Italian production - DTR documentation - two-shaft - with feeder - used multi-saw, very good condition Net price: PLN 197,900 Net price: EUR 46,550 depending on the price EUR 4.25 (Prices may change with with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7532 TECHNICAL DATA - track width 340mm - shaft width 400mm - shaft diameter 65mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height (with a 400mm disc) 140mm - table top width with clearance 870mm - table top length 2140mm - from above: - pawls - 1 roller, pressure sliding - pawls - sliding, pressure roller - shaft with saws - sliding, pressure roller - sliding, pressure roller - from below: - guide bar - sliding roller - pawls - track - electric lifting of the body 0.55kW - electric lifting the shaft with saws approx. 0.55kW - central lubrication - smooth regulation of feed speed on the inverter (1.5kW) 8-48m/min - main engine 55kW - diameter of the exhaust port 300mm - overall dimensions length/width/height 2540x1480x2570mm - weight approx. 3500kg ADVANTAGES - German production - 5 pieces of 350mm blades installed - electric height adjustment - operator panel - smooth speed regulation Lolevu A Eyshcdwyohg - used multi-saw, very good condition Net price: PLN 145,900 Net price: EUR 34,300 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6911 TECHNICAL DATA - track width 350mm - shaft width 370mm - max cutting height 200mm - max disc diameter: - on the upper shaft 340mm - on the lower shaft 300mm - disc hole diameter 80mm from above: - deflectors - 2 sliding pressing shafts - pressure - shaft with 37kW saws Lolhcdskyr H Aowyshg - 2 smooth sliding shafts from below: - feeder table + guide strip - deflectors - track - shaft with 37kW saws - track - 1 sliding, smooth, output shaft - pneumatically pressed rollers - max disc diameter 300mm - electric lifting of the upper body up/down 1.1kW - automatic central lubrication - electrically adjustable smooth regulation of feed speed 3kW - diameter of exhaust port 230mm, 250mm - dimensions length/width/height 3000x2300x1900mm - weight about 5000kg ADVANTAGES - Italian production - two-shaft - used multi-saw, very good condition Net price: 178900PLN Net price: 42000 EUR Net price calculated according to the exchange rate of 4.25 PLN/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-shaft saw Catalog number 7405 Lhjlhcdwet Ht Hhoyeg TECHNICAL DATA - max cutting height 150mm - max element width 700mm - working width of the shaft with saws 530mm - max saw diameter 450mm (350mm installed) 350mm - disc hole diameter 90mm from above: - pawls - 2 pulling shafts, toothed from below: - 2 pulling shafts, smooth - shaft with saws - pulling shaft, smooth - 4 types of feed speeds - feed motor approx. 2kW - motor 30kW - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – used machine, very good condition Net price: PLN 42,900 Net price: EUR 10,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names only for informational purposes, enabling identification of the goods. We only resell goods that the manufacturer has previously introduced to the market. We do not have any business relations with the manufacturer.

Condition: excellent (used), Catalog number 7280 TECHNICAL DATA - track width 340mm - shaft width 400mm - max. disc diameter 350mm - disc hole diameter 80mm Lelsrwl Egehcdwyshg - max. cutting height 120mm - table top width with clearance 700mm - table top length 1720mm from above: - pawls - metal sliding pressure shaft - pawls - metal sliding pressure shaft - shaft with saws - metal sliding, pressure shaft 2pcs from below: - guide bar - metal sliding roller - pawls - caterpillar - electric body lifting 0.55kW - central lubrication - smooth feed speed regulation 1.5kW - main engine 37kW - diameter of the exhaust pipe 200mm - total dimensions length/width/height 1800x1670x1780mm - weight about 2500kg - German production - used multi-saw, very good condition Original photos Net price: PLN 86,900 Net price: EUR 20,460 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height 150mm - table top width with clearance 700mm - table top length 1790mm from above: - pawls - pressure, sliding shaft - pawls - pressure, smooth shaft - shaft with saws - smooth, pressure shaft 2pcs from below: - guide bar - sliding, smooth shaft - pawls - caterpillar feed table - roller width 500mm - number of rollers 3pcs - total dimensions of the feed table length/width/height 580x530x900mm outfeed table - roll width 500mm - number of rolls 6pcs - total dimensions of the outfeed table length/width/height 1210x535x900mm - central lubrication - smooth regulation of feed speed - main engine 37kW - diameter of the exhaust port 140mm - total dimensions of the multi-saw length/width/height 2000x1450x2000mm - total weight approx. 3000kg ADVANTAGES - German production - large cutting height - feed and outfeed table - used multi-saw, very good condition Net price: PLN 46900 Net price: EUR 11000 Net price calculated according to the exchange rate of PLN 4.25/EUR Lhjlhcdwjr Iildoyog (in the event of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), FOD BYDGOSZCZ* DPPA II 50 510/120 multi-shaft saw Catalog number 7307 TECHNICAL DATA - max cutting height 120mm - max element width 700mm - working width of the shaft with saws 510mm - max saw diameter 400mm - blade hole diameter 70mm from above: - pawls - 2 pulling shafts, toothed from below: - 2 pulling shafts, smooth - shaft with saws - pulling shaft, smooth - 2 types of feed speeds - feed motor approx. 2kW - 30kW motor - roller feed table - roller width 700mm - total dimensions length/width/height 3000x750x800mm - table roller receiving Lslhcdor H Hb Eewyshg - width 760mm - total dimensions L/W/H 3100x900x800mm - machine dimensions L/W/H 1800x1500x1840mm + electrical box - weight approx. 3000kg ADVANTAGES - Polish production - roller tables - used machine, very good condition Net price: 39900PLN Net price: 9380 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names only for informational purposes, enabling identification of the goods. We only resell goods that the manufacturer has previously introduced to the market. We do not have business relations with the manufacturer.

Condition: excellent (used), FOD BYDGOSZCZ* DPPA III 50 650/140 multi-shaft saw Catalog number 7318 TECHNICAL DATA - max cutting height 140mm - max element width 700mm - working width of the shaft with saws 650mm - max saw diameter 400mm Lolhstk H N Tscdwyehg - blade hole diameter 70mm from above: - pawls - 2 pulling shafts, toothed from below: - pawls - 2 pulling shafts, smooth - shaft with saws - pulling shaft, grooved - smooth feed speed adjustment on the inverter - feed motor 4.4kW - motor 30kW - machine dimensions L/W/H 2500x1400x1900mm - weight approx. 2500kg – Polish production – used machine, very good condition Net price: PLN 40,900 Net price: EUR 9,620 depending on the price of EUR 4.25 (Prices may change with higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. We use all trademarks and names only for informational purposes, enabling identification of the goods. We only resell goods that the manufacturer has previously introduced to the market. We do not have any business relations with the manufacturer.