Used trimming saws for sale (48)

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW operating panel, conveyors Fsdpfoz N Tfusx Ahdepn

Condition: good (used), Year of construction: 1995, Max. cutting length: 5200 mm Fsdjz H H Dwepfx Ahdspn Max. cutting width: 600 mm Max. cutting height: 170 mm Saw motor: 11 kW Drive: hydraulic, via chain Width stop with digital display With laser

Condition: good (used), Year of construction: 1987, Max. cutting length: 5.2 m Max. cutting width: 0.6 m Max. cutting height: 140 mm Fpjdez Dnppepfx Ahdon Ready for immediate use. The blades will be replaced with new ones.

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain max. cutting length 4200 mm max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop Fpedpfezq Rh Djx Ahden new strips will be supplied available at the location in working condition

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. Fpjdpfx Aszkkf Ajhdjn This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, functionality: fully functional, Maba longitudinal circular saw, 4200 mm cutting length, non-tilting. Fpodpfxszxbh Re Ahdon

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,100 mm, saw blade diameter: 600 mm, height adjustment type: electric, rotational speed (max.): 2,900 rpm, Equipment: saw blade guard, Cutting length: 6200 mm Cutting width: 1100 mm with electrically adjustable fence Cutting height: 195 mm Fjdpfxoz D Ahgo Ahdepn Motor power: 11 kW Saw blade speed: 2900 rpm Infinitely variable feed speed adjustment: 1–80 m/min Two laser guides 6-position cutting height adjustment Two pneumatic clamps Year of manufacture: 2010

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) Fodpfev Hm T Sjx Ahdjpn - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine

Condition: excellent (used), Opportunity in excellent condition from Switzerland liquidation: Irion longitudinal circular saw, 6200 mm, 15 HP, retractable saw blade, electric height adjustment, stepless hydraulic feed via foot pedal. Fpodpeyw N Ryofx Ahden

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Fjdpfxsuprqws Ahdepn Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Used, functional condition

Condition: good (used), Year of construction: 2011, beautiful rip saw with max. 8 m cutting length Fpsdswrb Rujpfx Ahdsn max. width 1.9 m max. cutting height 160 mm motor 11 kW with laser for cutting joint display with integrated pressure beam

Condition: good (used), Year of construction: 2009, Edger and panel saw in one machine. Max. cutting length: 6.2 m Max. cutting width: 2.1 m Max. cutting height: 120 mm With alignment laser for the cutting line 2 clamping devices, left and right 6 retractable cross-feed chains in the rear table Fpedsz Abpispfx Ahdon Saw motor: 11 kW

Condition: ready for operation (used), Torwegge Multi-Blade Saw Fpodoy Rqckjpfx Ahdsn Cutting width: 240 mm Chain width: 250 mm Cutting height: 100 mm Motor power: 30 kW Feed steplessly adjustable: 5–25 m/min

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Condition: absolutely very good condition. Fedpozqrrqefx Ahdopn Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: good (used), Year of construction: 2015, Double edging saw with electric adjustment via joystick or programming (manufacturer Weintek Austria). Alignment of the beam through 3 cross chains (can be controlled individually or synchronously). Max. cutting length 4.2 m. Kerf display with 2 lasers. Saw motors each 6.5 kW. Max. cutting width 0.6 m. Max. cutting height 80 mm. Max. cutting height 60 mm. Fodpjwy Hv Ejfx Ahdjpn

Condition: used, Year of construction: 1952, Double-edge trimmer / circular saw for edge trimming Manufacturer: Esterer Type: DK600 Year of manufacture: 1952 Maximum feed width: 70 cm 0-line on the left Adjustable saw blade on the right Fpedpfx Aszl N Tnohdsn Immediately available Location: Austria, near Ried im Innkreis

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 210 mm, cutting width (max.): 820 mm, saw blade diameter: 550 mm, height adjustment type: pneumatic, saw blade bore: 80 mm, actuation type: electric, total length: 8,000 mm, total width: 1,510 mm, total height: 1,850 mm, overall weight: 2,600 kg, table height: 900 mm, Equipment: CE marking, rotational speed infinitely variable, saw blade guard, Longitudinal circular saws from the market leader, with Swiss quality! Fodpfxoz A S Umo Ahdjpn Cutting lengths: 2,200 - 11,200 mm Cutting widths: 420 - 3,000 mm Saw motor: 11 kW, optional 15 kW Max. cutting height: 210 mm Saw blade diameter: 450 - 620 mm Saw feed: Infinitely variable, from 0 - 80 m/min. Compressed air connection: 1/2”, 6 bar Required air volume: approx. 3500 m³/h

Condition: excellent (used), CATALOGUE NUMBER 8019 TECHNICAL DATA - max. cutting length 3700mm - max. cutting height 1300mm - max. cutting width 700mm - main saw motor power 11kW - clamping beam - saw blade diameter 550mm - work table height 860mm - pneumatic clamping - work table width 135mm Fpedpfezw Dg Tsx Ahdjn - dust extraction nozzle diameter 2x150mm - overall dimensions L/W/H 5600x1500x1900mm - weight approx. 3000kg – for trimming boards – pneumatic clamping – hydraulic saw guidance – cutting width hydraulically adjustable – unpainted – used saw, very good condition Net price: 39900 PLN Net price: 9279 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Woodmizer EG100 double-blade edger, in good condition, 520 mm material width, 300 mm edging width, 7.5 kW, 250 mm blade diameter, 50 mm cutting height. Fpodpfszqq R Sex Ahdsn

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Fjdpst E Nw Tsfx Ahdspn Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: excellent (used), CATALOGUE NUMBER 8026 TECHNICAL DATA - max. cutting length 3100 mm - max. cutting height 80 mm - max. cutting width 570 mm - main saw motor power 10 kW - blade diameter 450 mm - work table height 850 mm - work table width 660 mm - dust extraction nozzle diameter 1x160 mm, 1x170 mm - overall dimensions (length/width/height) 5500x2100x1600 mm - weight approximately 2500 kg Fsdozw Dkfjpfx Ahdepn ADVANTAGES – for trimming boards – used saw, very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length Fpedjyudquepfx Ahden • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers • Integrated chip removal conveyor belt • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted • Hydraulic width adjustment •

Condition: used, Woodmizer EG250 double-blade sawmill, like new, maximum 80 operating hours, 15 kW, saw blades, continuously variable feed. Fsdpszqqn Djfx Ahdopn

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw Fsdpow Slwkefx Ahdspn

Condition: used, PAUL KME REWINDER 1 FIXED BLADE 1 MOVABLE BLADE Fpsdpfx Aezwwlvehdsn MULTI-BLADE SHAFT 37 KW MOTOR OVERHAULED IN 2007