Mayer veneer saw

Mayer

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 4,300 mm, cutting depth: 4,300 mm, This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information. • Main motor power: 9 kW • Optimized travel speeds of the main saw via additional frequency converter • Automatic electronic clamping detection for detecting panel corners • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment Dcedpeygw Ausfx Afyed • Label printer

Condition: new, functionality: fully functional, power: 18.02 kW (24.50 HP), Maximum precision and high cutting heights with rapid feed rates – this is only possible with an uncompromisingly stable gantry construction. This level of uncompromising stability is achieved by using a proven tubular steel framework. The thick-walled steel tubes are meticulously welded into a complex support frame by our experienced staff, requiring many hours of dedicated craftsmanship. This creates the solid foundation for the high-precision guide rails, along which the saw carriage, weighing several hundred kilograms, will later move. Perfect machine size for your workshop: 3200 x 3200 mm The machine allows the processing of workpieces up to 3200 mm in length and width. This means the saw carriage can execute cuts up to 3200 mm long. The material pusher can also be adjusted up to 3200 mm to the cutting line. Automatic cutting height adjustment up to 118 mm The powerful motor drives the saw blade through material at cutting heights up to 118 mm. For optimal cutting geometry, the blade should project about 10 mm above the workpiece. This optimizes energy consumption, noise emissions, and blade service life—a significant advantage for users. Every machine is therefore equipped as standard with automatic cutting height adjustment. The machine scans the height of the material and automatically sets the saw blade to the correct cutting height. Even when cutting multiple sheets in a stack, the saw blade drive must remain powerful. That’s why we equip our saw with a robust 18 kW (24.5 HP) main saw motor. Motorized, stepless cutting height control including grooving function A positioning drive allows the entire saw unit to be automatically raised or lowered to a set height, expanding production possibilities and ensuring precise grooves. Adjustment is made directly via the operator terminal. Motor: 18.0 kW (24.5 HP), 3x400 V / 50 Hz Optional equipment: - 14: Infinitely variable speed control, 2000–5000 rpm - 95: Pneumatic pressure device, 50–2100 mm - 24: Dust extraction pack on saw carriage for processing gypsum- and cement-bonded materials - 30: Air-cushion table, 2300 x 600 mm (2 units) - 28: Movable machine tables on linear guides and rollers - 40: Number of double-finger pack clamps, opening height 105 mm - 41: Additional double-finger pack clamp, opening height 105 mm - 38: Automatic trimming via laser measurement Dsdpfowfdiyex Afyjcd - 45: Additional double roller conveyor for sagging workpieces - 44: 24" touchscreen control unit - 90: Network connection preparation - 86: Control cabinet in special position - 700: Ardis module 1 - 710: Ardis module 2 - 714: Post-processor - 720: Ardis module 3 - 400: Helical rack for smoother operation - 401A: Saw carriage feed 0.2 m/min–60 m/min, return 80 m/min - 403: Cut length selection via switch - 404: Double pressure beam SL 3200 - 437: Technology database including controlled pressure regulation for pressure beam and pack clamps - 92: Transport preparation for crane unloading Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Subject to changes, prior sale, and errors. Dcsdpfxeylwbno Afyed

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Cutting length: 4000 mm Front and rear support tables Dedpfxeyh It Rj Afyjcd Extraction duct

Condition: good (used), Year of construction: 2000, Motorized roller table MAYER Type:RGM 770-4250 Year 2000 Roller diameter : 70 mm Roller conveyor width : 770 mm Roller height from floor : 760 mm Dcodpsu Euccofx Afyod Total length : 4250 mm Good condition .

Condition: new, Fully automatic palletizing system HYDRA cobot palletizer: 👉 up to 30 kg payload: available in versions with or without lifting axis 👉 up to 2 m palletizing height (with lifting axis up to 2.6 m) → Robot base and control elements → Pallet frame for 1 or 2 Euro pallets → FJM vacuum gripper for packages, design as requested → Innovative palletizing software → Palletizing system, firmware, and software up to date → Customized configuration according to customer requirements → Version with pallet wrapper available Depending on customer requirements, we offer various configurations of our palletizing system. The palletizing system includes: → Collaborative DOOSAN ROBOTICS robot with 6 / 20 / 30 kg payload Dcsdpfx Afsyhglhsyod → User-friendly software for creating, saving, and simulating palletizing tasks → Lifting axis depending on palletizing requirements → Optional: pallet wrapping and conveyor technology can be integrated → Optional: safety technology and camera systems ❗ For logistical reasons, we only deliver within the DACH region and countries bordering Austria. HYDRA cobot palletizer by FJ Mayer GmbH Developed and programmed by Franz Josef Mayer GmbH Austria. ©Franz Josef Mayer GmbH

Condition: used, Year of construction: 1964, 200 mm Dcodpfx Aoyacnvjfysd mechanical ja weight 1,5 t ja

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dsdpfx Aevwf Agofyscd

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg Dcedpfx Afjyc Sggoyod EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.3 kW at 2800 rpm at 50 Hz -Voltage: 380 volts Dedpfob A Rzvjx Afyscd -Receiving shaft: Ø 24 mm -Tool: Ø 118 mm -Dimensions: 380/200/H240 mm -Weight: 25 kg