Used surface grinding horiz. 400-699mm grind. length for sale (219)

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: M60I/9035, Offer Number: M60I/9035 Machinetype: surface grinding machine Make: STÖCKEL Type: FX60/30 SPS Constr. year: 2010 table size: 600 x 250m Csdjw N Dmxopfx Adusrk Location: Germany

Condition: ready for operation (used), Year of construction: 1982, Sanding length 500 mm Sanding width 350 mm Sanding height 375 mm Sanding spindle drive 3.7 kW Cedpfx Adsu Ag Aisuerk Table speed 2-28 m/min Automatic cross feed 1-60 mm/stroke Automatic vertical feed 0.002 - 0.06 mm/min Grinding wheel dimensions 300 x 76.2 x 50 mm Machine weight approx. 2,800 kg

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, grinding length: 600 mm, grinding width: 375 mm, grinding height: 400 mm, grinding wheel diameter: 300 mm, table load: 400 kg, grinding wheel width: 50 mm, overall weight: 3,600 kg, ELB Optimal 6375 SPS, year of manufacture 1995, grinding area 600 x 375 mm, grinding wheel 300 x 50 mm, spindle power 3.7 kW, automatic grinding cycle with roughing, finishing, spark-out, and lift-off. The dresser is mounted on the spindle head with compensation. The machine has been professionally overhauled by us and now meets the geometry specifications of a new machine. The grinding spindle has been newly mounted. Accessories: electro-permanent magnetic chuck 600 x 350 mm, coolant tank with automatic paper filter. All functions have been tested and the machine can be demonstrated under power at our facility. We are happy to handle installation and on-site training, as well as future service needs. Financing / leasing is not a problem, and we will be happy to provide an offer! Credpfoxdalfjx Adusk

Condition: ready for operation (used), Manufacturer: Jung Type: HF 50 Magnet table: 450x175mm Crodpfx Adjnr E Dxouok

Condition: like new (used), Year of construction: 2017, operating hours: 59 h, functionality: fully functional, grinding length: 400 mm, grinding width: 200 mm, feed length X-axis: 510 mm, feed length Z-axis: 220 mm, feed rate X-axis: 20 m/min, grinding wheel diameter: 205 mm, distance table to spindle center: 357 mm, table load: 120 kg, type of input current: three-phase, grinding wheel width: 16 mm, spindle speed (max.): 3,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 2,100 kg, grinding spindle motor power: 2,200 W, grinding wheel speed: 3,600 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 Colour touchscreen: Yes Maximum grinding lenght x width: 400 x 200 [mm] Stroke X axis (table movement): 510 [mm] Min. Stroke speed X axis: 100 [mm/min] Max. Stroke speed X axis: 20000 [mm/min] Cedpfx Aow Hf Hioduork Z axis travel (transverse movement): 220 [mm] Min. distance spindle nose / table: 22.5 [mm] Max. distance spindle nose / table: 357.5 [mm] Max. load on table: 120 [Kg] Grinding wheel min. speed: 1000 [rpm] Grinding wheel max. speed: 3600 [rpm] Grinding spindle motor power: 2.2 [kW] Max. diameter grinding wheel: 205 [mm] Max. grinding wheel width: 16 [mm] Min. grinding wheel width: 6 [mm] Grinding wheel bore: 31.75 [mm] Number of running hours: 59 [h] Supply voltage: 400 [V] Total power required: 11 [kVA] Weight : 2100 [Kg] INCLUDED EQUIPMENT: x1 150 [L] coolant tank FB1/R with papertape filtration unit FB1 x1 BRAILLON electro-permanent magnetic chuck type EPEFINE 2 x1 BRAILLON magnetic chuck remote control, microprocessor-based, type T10 x5 grinding wheel flanges x1 oil chiller x1 transformer x2 service keys x1 balancing shaft x1 set of axis-brackets for transport STANDARD CONVERSATIONAL PROGRAMMING MODE: Straight and angular dressing (standard) Surface grinding, multiple plunge grinding, and face grinding (standard) INCLUDED ISO PROFILING: Wheel profiling Contour machining of workpiece Full functionality for V-shape and freeform programming on the grinding wheel, and ISO contouring on the workpiece. Precise positioning integrated: +/- 1 [μm] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to brands like Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see cylindrical grinder, lathe, machining center, milling machine.

Condition: used, Year of construction: 1987, grinding length max. 600 mm Codpfxet Nzh So Adusrk grinding width max. 320 mm workpiece height max. 500 mm magnetic clamping plate 300 x 605 mm horiz. table movement: longitudinal hydr. max. 750 mm horizontal table movement: cross hydr. max 340 mm sanding disc diameter 350 mm grinding wheel width 40 mm bore 127 mm spindle turning speed range 1500 U/min rapid traverse vertical 400 mm/min total power requirement 3,7 kW weight of the machine ca. 2200 kg dimensions of the machine ca. 2300 x 1800 x 1850 mm

Condition: used, Year of construction: 1982, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t Cedpfx Aeu Rt Dijduork dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement.

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark Crsdpevkgvhefx Aduok - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: good (used), Year of construction: 1985, functionality: fully functional, ELB - SWN 5 VA II Surface Grinding Machine - Grinding area X/Y/Z: 525x375x255 mm - Magnetic chuck: 700x300 mm - Table clamping surface: 900x250 mm - Table longitudinal travel: 10-625 mm - Max. table load: 280 kg - Table feed: 1-30 m/min - Reciprocating grinding: 3-30 m/min - Distance, table to spindle center: 525 mm - Vertical feed speed: 2-180 mm/min Cjdpexn Szyjfx Adusrk - Adjustable infeed: 0.001-2 mm - Grinding wheel speed: 3000 rpm - Coolant system - Machine feet - Documentation - COMPLETE TECHNICAL DATA SEE PHOTOS Dimensions: LxWxH 2.7x2.2x2 m / Weight 3500 kg Subject to errors and input mistakes.

Condition: refurbished (used), grinding length: 600 mm, grinding width: 200 mm, grinding length 600 mm Crsdpfxexal Hys Adusk grinding width 200 mm electromagnetic chuck 450×175 mm X-travel 660 mm Z-travel 225 mm grinding wheel size 250x25x51 mm Control Jung TouchScreen weight approx. 3000 kg

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 7570, 1 used: JUNG Surface and Profile Grinding Machine • Model: HF 50-R(D) • Machine No.: 7570 • Year of manufacture: approx. 1977, overhauled 06-1998 • Grinding area: 500 x 200 mm • Grinding wheel: max. 250 x 25 x 51 mm EQUIPMENT: Electro-magnetic chuck 450 x 180 mm 1 straight dresser mounted on the side of the spindle head 1 grinding wheel holder with wheel 1 universal paper band filter 1 frequency converter for speed control Leveling feet Crodpfjw R Tqpsx Adujk

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: Elb Type: Smart NG STC SN: 511210608 Control: Siemens, type: Simatic Multipanel Touch Magnetic clamping table, 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle output: 4.3 kW Codpfx Adev T Rhasuerk Grinding spindle taper: 36 mm Max. vertical travel: 475 mm Max. transverse travel: 370 mm Machine weight: 3,800 kg Machine dimensions: L/W/H 2,750 x 2,050 x 2,150 mm, Electronic handwheel for Y/Z axis, Dressing unit with dressing compensation/diamond dressing, height adjustable by 22 mm, Wet grinding unit with 50 l cooling pump, 60 l automatic paper belt filter, Distance measurement in the Y/Z axis via rotary encoder

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 3806, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, grinding spindle speed: 3,000 rpm, power: 3.5 kW (4.76 HP), Equipment: rotational speed infinitely variable, JUNG JF520 - workshop overhauled Mechanically and electrically inspected and function tested by our JUNG specialists Wear parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor feed - 3-axis HEIDENHAIN digital readout - Dressing compensation - Magnetic force control Crsdpfx Aewz Hf Nsdusk - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Delivery time: short notice We are happy to accept your used JUNG grinding machine in part exchange.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* Cedpfx Adjp Dt T Nousrk * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: new, ROGI surface grinder type FSG-2050M Table size ----- 200 x 508 mm Longitudinal displacement of work table ----- 530 mm Cross displacement of worktable ----- 220 mm Unloading ----- 450 mm Max. permissible workpiece weight ----- 180 kg Grinding stone ----- 220 × 20 × 31.75 mm Motor ----- 2.2 KW Cjdpfsga T H Sjx Aduork Weight ----- 1600 kg Dimension machine ----- 2300 x 2150 mm

Year of construction: 1962, condition: good (used), machine/vehicle number: 3791, max. grinding length: 620 mm max. grinding width: 250 mm table plate chuck: 200 x 620 mm grinding plate measures: 200 x 220 x 51 mm electrical connection: 380 V, 1/1,8 kW Crsdpfx Aded Ihiisusk space needed: 1650 x 1450 x 1800 mm weight: 1350 kg

Condition: good (used), Year of construction: 1963, functionality: fully functional, machine/vehicle number: 2885, Automatic grinding wheel infeed, automatic cross adjustment, Table longitudinal movement hydraulically or manually, Wet grinding device, electromagnetic clamping plate, accessories Crsdpsrk Rcgefx Aduok Sanding length: 500 mm sanding width: 200 mm Max. workpiece height: 250 mm speed 2800 rpm Clamping surface: 600 x 200 mm Total power requirement: 3.7 kW Machine weight approx.: 1.6 t Operating instructions with circuit diagrams Machine can be demonstrated

Condition: reconditioned (used), Year of construction: 2025, grinding length: 400 mm, grinding width: 200 mm, JUNG JF415 / JF420 rebuilt mechanicaly, geometricaly und electricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes Crjdoc S Agvspfx Aduok - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel - 12 month warranty delivery time approx. 12 weeks max. grinding range: 400 x 200 m

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: Cjdpfx Aop Dt Ttodujrk - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Honing device Wet sanding device Crjdpfetu Il Tox Aduek

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 250 mm, JUNG JF520 / JF525 SPM-X rebuilt mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel - 12 month warranty max. grinding range: 600 x 250 mm Csdpfebwl Uhsx Aduerk delivery time approx. 12 weeks

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. Table load: 300 kg Motor power: 4.6 kW Connection: 400 V Crjdjd Sfd Espfx Aduek Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast parts, e.g. machine stand, table etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross lifting device - Splash guard on the rear - Grinding wheel - Grinding wheel flange - Honing device - Balancing mandrel - Balancing scale - Dressing diamond - Machine light - Leveling elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital readout, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical infeed AD 5 (NC-controlled) for model AH - mode of operation: Automatic rapid traverse vertical and automatic fine feed vertical - Automatic demagnetization control for magnetic clamping plate - Coolant system with magnetic separator - Manual dressing device - Parts enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for cross feed - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations on request.

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 250 mm, grinding wheel diameter: 225 mm, JUNG HF50 mechanicaly, geometricaly und elektricaly rebuilt according JUNG acceptance protocoll for new machines Crodpfx Adobwl Ubjuok 12 month warranty in stock max. grinding range: 600 x 250 mm

Year of construction: 2023, condition: refurbished (used), JUNG HF50 SPM mechanically and geometrically overhauled according to JUNG new machine protocol Electrical overhaul approx. 2010 / function tested and wear parts replaced (in new control cabinet) new painted - stepper motor infeed - 3 axis digital display - dressing mass compensation - adhesive force control - used magnetic clamping plate - paper band filter optional 12 months warranty on mechanics and geometry and 6 weeks parts warranty on electrical components max. magnet size: 600 x 200 mm (standard 500 x 200 mm) max. grinding area: 600 x 250 mm delivery time: by arrangement / subject to prior sale Crodpfx Aehcw U Uedujk We will gladly take your used JUNG grinding machine in payment

Condition: refurbished (used), Year of construction: 2025, grinding length: 600 mm, grinding width: 300 mm, grinding wheel diameter: 300 mm, JUNG JF625 / JF630 rebuilt mechanicaly, geometricaly und electricaly rebuilt according JUNG acceptance protocoll for new machines - retrofit with new 12“-SIEMENS-Touch-OP control - new electrical cabinet with magnetic control for chuck - plain text error codes - electro mechanical vertikal feed - dresser compensation - automatic lubrication unit - all numeric values (verical feed) und on/off functions e.g. hydraulic and und coolant unit over touch panel - all analog functions e.g. rpm, magnetic force and feed of Z-axis fpr direct access of the worker over switches on the control panel Credpfx Asdrmlnjduek - 12 month warranty grinding range: 600 x 250 mm delivery time approx. 12 weeks