Surface grinding machine

Jung JF415-i

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting Giodpfx Acju Ngicofeu accessories: -alignment device for grinding wheel holder *

Condition: used, Year of construction: 1998, Surface grinding machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of manufacture: 1998 Table length: 400 mm Table width: 200 mm Maximum workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions L x W x H: 1,800 x 1,200 x 2,250 mm Giedjwcym Aopfx Acfeu 3626

Condition: good (used), Surface grinding machine GEIBEL & HOTZ FS 40 Primus SA, No. 920287, clamping surface 400 x 200 mm Gijdpeunw Iljfx Acfou

Year of construction: 2014, operating hours: 5 h, condition: like new (used), functionality: fully functional, grinding spindle speed: 16,000 rpm, IMT Spindle Type DRESS 72 - 37 - Absolutely like new For truing profile grinding wheels, incl. motor connection cable and spindle bracket. According to the manufacturer, highest precision and smooth running during the truing process of CBN grinding wheels. HF Spindle Dress 72 - 37 Spindle housing: 72 mm Speed up to 16,000 rpm (clockwise/counterclockwise) Power S1 100%: 0.5 kW from 11,500 rpm Power S6 40%: 0.8 kW from 11,500 rpm Motor type: Asynchronous, 3-phase Number of poles: 4-pole Power consumption: Voltage: 230 Volt Current S1 100%: 2.0 Ampere Current S6 40%: 3.5 Ampere Current (max): 6.0 Ampere Frequency up to 533 Hz Spindle ball bearings: Hybrid ceramic Bearing lubrication: Lifetime grease-lubricated Cooling: bracket cooling Purge air + labyrinth: 1 bar, approx. 50 l/min Temperature monitoring: PTC Tool holder: Ø 40 h2 Gsdogl Arrepfx Acfeiu Manual tool clamping Electrical connection (motor): 8-pin plug Axial supply connections Weight: approx. 4.7 kg Motor cable: 8+PE KD /-.10 Spindle bracket 72 complete Aluminum, black anodized Reducing sleeve 80 / 72 Dressing spindle for mounting dressing rolls on CNC grinding machines Profiling in grinding wheel Operating instructions available Spindle was used for trials on the machine. Price / details upon request. All technical data subject to error/typos. Sale exclusively to countries of the European Community.

Year of construction: 2015, condition: used, workpiece diameter 300 mm workpiece weight 999 kg workpiece height 145 mm Features: -Digital display vertical axis -Automatic feed -Programmable automatic end stop -Grinding spindle drive with infinitely variable electronic speed control Gisdpfx Ajxflclocfsu -Infinitely variable cross feed and table rotation -24V magnetic clamping plate 300 mm -Various occupational safety devices, e.g. protective cover monitoring, operating status display via traffic light -Lubricating oil level monitoring -The machine was completely overhauled in 2015, at which time the entire electrical system was replaced with PLC control and 24V control voltage -Paper belt filter system specially designed for this machine The following work has now been carried out: -Replacement of bellows and belts -New bearings for grinding spindle -Grinding carriage bed and rotary table bed scraped by hand to restore better and more precise running characteristics -Grinding carriage and cross table lifted from machine body and all tracks cleaned, lubrication checked -Various wear parts, such as rubber caps and switching elements, replaced -Detailed functional check -Modernisation of feed arm -Paint touch-up work, machine colour: light grey RAL 7035 and RAL 7012

Condition: used, Manufacturer: BLOHM Type: Simplex 5 Table size: 900x300mm Giodpfx Acsvtyxuofeu Working length: 600x300mm Without magnetic table!

Condition: good (used), Year of construction: 1990, Hydraulic surface grinding machine with automatic vertical feed Max. grinding length: 670 mm Max. grinding width: 280 mm Max. grinding height: 400 mm Table speed, longitudinal: 2 – 35 m/min Table speed, cross: 0.3 – 40 mm/stroke Rapid traverse: yes Grinding wheel dimensions: 300 / 76 x 40 mm Drive power: 4 kW Machine dimensions L x W x H: 2000 x 1850 x 2000 mm Machine weight: 2300 kg Hydraulic & electrical system dimensions L x W x H: 1200 x 800 x 2000 mm Hydraulic & electrical system weight: 650 kg Accessories / Special features: • Permanent magnetic chuck 630 x 200 mm • Automatic vertical feed with digital display • Manual dressing device • Coolant system • Separate hydraulic unit • Grinding wheel • Machine levelling elements Gisdpfsf Um Rasx Acfsu Note: o Hydraulic cylinder for table stroke newly sealed o New filters in hydraulic unit o Handwheel adjustment for crossfeed newly mounted Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1994, condition: used, workpiece diameter 350 mm workpiece weight 99999 kg workpiece height 240 mm total power requirement 7,5 kW weight of the machine ca. 2 t Seltene Gelegenheit: Teilüberholte Hochpräzisions-Rundtischflachschleifmaschine Mit komplett neuem Schaltschrank und neuer Steuerung mit BEMA Schleifsoftware Rundtisch-Durchmesser 380mm Magnet-Durchmesser 350mm Schleifscheibenabmaße 300x25x76,2mm Tischdrehzahl variabel max. 200U/min Schwenkwinkel des Tisches +-3 Grad Schleifspindeldrehzahl 800-4200 U/min Leistung Schleifspindelantrieb 5KW Verfahrweg quer max. 225mm Verfahrweg vertikal max. 480mm Abstand zwischen Magnetspannfutter und Spindelmitte, max. 390mm Automatischer Kopfabrichter AF65: zum zylidrischen Abrichten der Schleifscheibe im CD-Abrichtverfahren (Abrichten während des Schleifprozesses) Hierdurch werden Schleifzeiten reduziert und Abrichtzeiten eingespart. Der Abrichtbetrag wird automatisch kompensiert. Automatische Antasteinrichtung AT-R: bietet die Möglichkeit, mit der Schleifscheibe das Werkstück schnell und automatisch anzufahren. CNC-Steuerung mit höchstem Programmierkomfort Unterschiedliche Schleifprogramme für -Pendelschleifen -Kurzhubschleifen -Einstechschleifen -jeweils eine oder mehrere Flächen in gleicher oder unterschiedlicher Höhe Ins Schleifprogramm integrierte Abrichtzyklen -Tischabrichten mit Einzeldiamant -Automatisch Geradabrichten -CD-Abrichten mit AF65 Gjdpfxoxbtl Tj Acfoiu Minizyklen: -automatisches Antasten an das Werkstück -Positionieren einzelner Achsen -Abrichten Einsatzgebiet: Hochgenaue Planschleifarbeiten in der Mittel- und Großserienproduktion bzw. Einzelteilfertigung in zentrischer Aufspannung

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Gjdpswzzrkjfx Acfsiu

Condition: good (used), machine/vehicle number: 4533, GOZUA RHC 75 CF centerless grinding machine Gjdpfora A Urox Acfjiu