Used Surface finishing machines for sale (193)

Year of construction: 1994, Condition: used, Price: On request - Year: 1994 - Documentation available: Yes - Serial number: 40640000 - Control: Conventional Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bshxev Stmvj Dnk Tewl Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Operating hours: 4,100 h, Condition: used, Functionality: fully functional, machine/vehicle number: 19562, Trough load: approx. 200 kg, trough width: approx. 800 mm, 1 turbine with 11 kW, 320 mm blast wheel diameter, operating hours: approx. 4,200, retrofit 2020, new belt, 3x pallets of blasting sand, dismantled. Bwohx Dewaai Esnk Tel

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Bwohx Djv U Raljnk Tjl Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Year of construction: 1994, Condition: ready for operation (used), Functionality: fully functional, power: 0.2 kW (0.27 HP), empty load weight: 45 kg, total length: 1,000 mm, total width: 320 mm, total height: 320 mm, nominal voltage: 220 V, machine/vehicle number: 808, Equipment: documentation/manual, Versatile, handy vibratory grinding machine. Extensive range of original accessories. Bwshx Djv U Dalenk Tel Little used, selling due to lack of use. Works perfectly.

Condition: like new (used), Year of construction: 2023, Complete machine park for rim machining and repair Machines and equipment were purchased in November 2023 and are in mint condition. Some show no signs of wear: Bshx Dnkov T Dv Ds Tewl - Alpha Omega CNC Delata 2 lathe for rims - Gema Opti Flex Pro Q powder coating machine - Romer KPO-3N paint extraction wall - Romer drying oven with SLS 30 O overhead conveyor - Alpha Omega immersion tank - Alpha Omega wash basin - MHG SMG 160 sandblasting system with Dust EX 1703 extraction system - Renner screw compressor with RSK 22 dryer, pre-filter, and tank The new price was €125,000. If you are interested and have a reasonable price, please contact us. Please feel free to call us at . All machines can be loaded by forklift. We are happy to arrange transport.

Year of construction: 2023, Condition: excellent (used), Functionality: fully functional, DyeMansion Powershot C 2.0 – Year of Manufacture 2023 – Excellent Condition For sale: A used DyeMansion Powershot C 2.0, manufactured in 2023 and first put into operation in August 2024. As a result, the machine is in excellent condition with minimal operating hours. Technical Details: ✅ Model: DyeMansion Powershot C 2.0 ✅ Year of Manufacture: 2023 ✅ Commissioning: August 2024 Bohxov T Trnj Dnk Towl ✅ Condition: Excellent, low operating hours ✅ Application: Automated blasting for cleaning 3D-printed plastic parts ✅ Features: Efficient and gentle cleaning, high throughput The Powershot C 2.0 is ideal for companies looking for a reliable and high-performance solution for depowdering additively manufactured parts. 📩 Interested? Feel free to contact us for further information or to arrange a viewing.

Year of construction: 2009, Condition: used, Price: On request Shot blasting machine, grinding cabin Manufacturer: USF Schlick Wheelabrator Model: Roto-Jet Type: 2600-601-17 Year of manufacturing: 2009 Controller: Siemens Number of blasting turbines: 4 Per blasting turbine: Power: 22kW Blasting-amount: 7kg/hour Blasting-speed: 450kg/min , 80m/s Maximum product-dimensions/feed: 1400x1000mm Diameter cabine: 2200mm Bwshovq U N Aox Dnk Tsl Vibrating shieve for grinding/blasting-materials and discharge-materials The products are hung in the blasting cabin. In the previous application the feed was by external rail-system. - Year: 2009 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: new, Year of construction: 2025, Dimensions 1140x620x600 (LxWxH) Weight of empty trolley approx. 75 kg Cart load capacity 425 kg Built-in wheels for easier handling Bohx Dov U Sn Djnk Tjwl Integrated tipping function makes emptying chips or material from the trolley much easier Transport by forklift or by pushing manually Color blue (for larger quantities, the option of choosing colors from the RAL chart)

Condition: new, Year of construction: 2024, warranty duration: 24 months, Equipment: cooling unit, Prices Pulsed laser cleaning machine Portable as a trolley 100 W 12.000,- € 200 W 18.500,- € 300 W 23.700,- € Behx Dnkoqml H Se Tjwl OPTION: GENERAL TERMS AND CONDITIONS Transportation costs: Air freight : 1200,-€ Delivery: 3 weeks working days after receipt of payment Payment : 100% before shipment List of laser cleaning parameters Parameter Function Value range Scan length (width) Change the pattern size 0-110 Scan speed (mm/s) Change the pattern scan speed from Galvo 3,000-12,000 Amplitude coefficient Changing the amplitude size 100-300 End optimization Optimize the end of a pattern 0-50 Calibration coefficient of the X-axis Increase the length of the pattern scan 0-100 Y-axis calibration coefficient Increasing the width of the pattern scan 0-100 X-axis shift coefficient Change the pattern shift in the X direction 0-100 Y-axis shift coefficient Change the pattern shift in the Y direction 0-100 Line spacing Change the line spacing in a filled pattern 0.10-1.00 Laser power Setting the laser power 10%-100% Laser pulse width Set the laser pulse width 10-500 Laser frequency Set the laser frequency 55-500

Year of construction: 2025, Condition: new, ZTV 50 Trough type vibratory machine * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. (Italian OLI Brand – 0.34 kW) * Changeable valve for the wastewater decharging * Control panel(EU Standards) included Bwehxowb Hhde Dnk Tol * Main switch and emergency stop switch. * Timer and working hours timer * CE safety standard * Dosing pump included. * The machine has noise isolation lid and metal machine cabinet - The cover is controlled by hand manually - The sound isolation cover provides significant noise reduction when the finishing process is in play. - It also curbs water or finishing compounds spillage from the vibratory finishing machine.

Condition: good (used), Small sandblasting system Bwohx Dsv Dvtvjnk Tsl Internal dimensions 1.2 x 1.2 x 0.6 m (L x W x H) Connection pressure: 8 bar with extraction, loading table and spare parts (see pictures)

Condition: used, Year of construction: 2017, Pos.1 VEN CLEAN Smart dedusting systemCompressed air dedusting for cleaning the workpieces to be painted from dust on profiled workpiece surfaces. Five rotating blowing stars are installed. These remove the dust from the surface. The loosened dust is extracted on both sides by suction shafts. on both sides. An external extraction system is required on site. Technical data: Roller transport length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h To be provided by the customer Compressed air consumption: 980 Nl/min. Ionisation as nozzle bar, not EX) with compressed air nozzles, Compressed air consumption 840LN/min. Pos. 2 Automatic spray gun VEN SPRAY Comfort- Manufacturer Venjakob - Type. VEN SPRAY Comfort CNC 7000 - Year of construction 2017 - Working height approx. 930mm+-20mm - Working width 1300 mm - Operating side left - Price for overhauled machine - Actual condition, machine not overhauled Bwehxevv Hryj Dnk Tel - Gun drive in duo version - Dry extraction system - Extraction nozzle diameter 500 mm - Exhaust air capacity 7,000 m³/h - Belt conveyor system - Infinitely variable feed speed ~ 2-6 m/min - With belt cleaning system with doctor blade in tungsten carbide design - Gun control, touch screen CNC7000 - Installed colour circles 1 pc. (optionally more possible) - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet, free-standing - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, in stock Voltage fluctuations max. +/- 5 %

Year of construction: 1995, Condition: ready for operation (used), A complete hardening line for small components is available. 1) Tempering furnace LAG 500-650/150-4000. 2) Drum washing machine DWS 450-1100. 3) Oil bath. 4) Bunker with scales and distribution chute. Total plant length: approx. 14700mm, total plant width: approx. 8500mm, total plant height: approx. 4400mm. Documentation available. On-site inspection is possible. Bwehov Sctxjx Dnk Tol

Condition: good (used), Functionality: fully functional, Sandblaster Lampugnani, working, 0.75 HP Bjhx Djv S I Stsnk Towl

Condition: as good as new (ex-display), Year of construction: 2017, UNION CM10 SP TWIN Double cabin: No. 1 washing cabin, No. 2 cooling cabin equipped with No. 3 pneumatic doors. "Pass-through" type the baskets are loaded from one side and unloaded in the opposite side performing the complete cycle. The parts are loaded with a mobile trolley on the side of the washing cabin and transit inside the cooling cabin and then unloaded from the side of the cooling cabin. - Advancement between booths automatically via sideshift. - Basket rotation with safety clutch. - Possibility of loading a basket ø1060mm useful inside 980 mm. - Internal useful height 1000 mm. / Max. load capacity. 500 kg. - Washing tank 280 lt. with level restoration and stainless steel axial washing pump. - Dosatron soap dispenser on wash tank 3-10%. - Rinsing tank 250 lt. with level restoration and axial washing pump in stainless steel. - Plant constructed of AISI 304 except for safety ground tank, external structures and external paneling (painted FE). - Safety ground tank at the base of the plant. - Total thermal insulation. - No. 2 External trolleys with drip tank + No. 2 Baskets ø1060 internal useful 980mm. Bshx Dnsr Duq Uok Tswl - Automatic doors with safety barriers. - N°3 Bag filters (N°2 on washing 25 micron - N°1 on rinsing 10 micron). - "Union DC60" oil separator. - High-pressure blower, side air blade positioned. - Drying fan with electric heating elements. - Vapor aspirator - Emptying pump. - No. 2 Cooling Fans. (Water Chiller NOT included in the quotation). - PLC SIEMENS S7-1200 with TOUCH PANEL KTP 700 BASIC + Gate Manager for remote assistance.

Year of construction: 2025, Condition: new, Functionality: fully functional, The LG200 FunktionsModule laser system is a compact and user-friendly laser class 1 marker for marking different materials. Furthermore, the device can be expanded with a wide variety of modules as required and thus adapted to individual applications. Features of the basic equipment: - All necessary components such as laser cabin, control, supply unit and extraction integrated. - Prepared for function modules that can be used at any time - Laser class 1 due to closed housing - Marking field standard 150 x 150 mm (other sizes on request) Bwehx Djctdfaenk Tsl - Generous working area (400 x 400 x 300mm) - NC-controlled Z-axis 300 mm for automatic adjustment to different workpiece heights Technical data see appendix.

Condition: like new (used), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (as good as new!!) Dyemansion Powershot C blast cabinet Surface-friendly cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of construction: 2021 The industry standard for simple and efficient powder removal Automated depowdering increases your production capacity With the Powershot C, a medium-sized installation space can be depowdered in just ten minutes. The time you need for parts cleaning, and personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts it contains. This configuration guarantees efficient powder removal. High ease of use with improved ergonomics and process control Experience a new level of process control with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of the process parameters via control panel and touchscreen. PERFORMANCE: Processing time: Variable from 1 to 40 minutes, usual throughput time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or nearly 1.5x full Bohx Dnstq E N Eok Towl Stratasys H350 build space Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space requirement in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Power 1kW Requirements 3x400V> 1kW 50Hz 2,5A PRESSURE AIR: Consumption Minimum: 1.4m³/min at 2.2bar Maximum: 1.8m³/min at 5bar NOISE EMISSION: Sound level < 80dB(A) Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: like new (used), Year of construction: 2019, operating hours: 2,650 h, Functionality: fully functional, machine/vehicle number: 85060, Wet blasting system Bshxov Saxfo Dnk Tjwl Suitable for wet blasting cutting tools or other components whose surfaces require treatment!

Year of construction: 2016, operating hours: 500 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 001606228, Gläsner sandblasting machines - Logo Speed, model: "Professional" for blasting logos, symbols and markings with a diameter of 80 mm. New price EUR 3.927. The device is a robust industrial device for industry and trade for marking large quantities. Very fine lines can be blasted to an accuracy of 1/10 mm. The machine works quietly and dust-free. Length: 800 mm Width: 700 mm Height: 850 mm Weight 70 or 120 kg Compressed air required 2 - 8 bar Sale due to closure of business. Hardly used Bwohx Deurf N Ssnk Tjl

Condition: good (used), 1 x Immersion washing machine Moc Behx Dorzt E Denk Tewl KL 60 S Year of construction: 1989 holder 610 x 440 mm with trigger

Year of construction: 2025, Condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. Behx Dneiq I Nljk Towl The handling of the machines is easy to learn.

Condition: good (used), Polishing Bock Brush width 50 mm Space required: B. 1050 x T. 540 x H 560 mm Bjhx Dnsd Am Dlok Tewl

Condition: used, Year of construction: 2011, For sale here is a double grinding and polishing machine from Buehler in good used condition! See pictures Manufacturer: Buehler Model: MetaServ 250 Item: 49-10057 Disc diameter: approx. Ø 250 mm Year of manufacture: 2011 The device is functional and was in use until the end, However, the wheel for adjusting the speed is broken and needs to be repaired. (see last picture) Shipping costs by forwarding agent: approx. 120€ You will receive an invoice with VAT shown. Inspection / collection is possible by arrangement in 42855 Remscheid. Sale ex location 42855 Remscheid, free loaded. Bohxjv I Ebqo Dnk Towl Errors in technical data and prior sale reserved.

Year of construction: 2010, Condition: used, Technical details: through-put width: 1500 mm pass through height: 600 mm Numbers of turbines: 4 Stck. workpiece length - min.: variabel mm Number of working hours: ca. 13.937 h power consumption: ca. 80 kW Continuous blast machine - roller conveyor blast machine 4 turbines, via blast wheel incl. various roller conveyors approx. 12 metres (for entry and exit) Single field approx. 6 metres long) Ex works Eisenach, system assembled, electrically connected. Inspection possible by arrangement. * Bjhx Dnsu Snpvsk Towl

Year of construction: 2001, Condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ Bwehju Nu Nkjx Dnk Tol total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *