Used Profile bending machines - intake diameter over 71mm for sale (55)

Condition: new, Year of construction: 2025, Functionality: fully functional, Technical characteristics: Section modulus 100 cm³ Main shaft diameter 130 mm Side shaft diameter 130 mm Outside diameter of the bending rolls 410 mm Adjustable rolling speed 0-6 m/min Installed power 18.4 kW (25 hp) Length 1,900mm Width 2,200mm Height 1,900mm Weight 5,720 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls driven (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rolls, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the roller position of the side rollers Optional, installed: Siemens NC control PGS-CLASSIC Cgeb Hbod Eqg Nj U Hzjt

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9518 202-5, Offer 24361 Cgebet Nfv Tj Hb U Hzjt Technical data: - 3 individually motor-driven rollers manual + controlled operation - Max. Torque per roll 1600 Nm - Stroke of bending roller X-axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roll diameter up to approx. 260 mm - Effective length of standard shafts approx. 300 mm - Shaft rotation infinitely variable 1 - 22 rpm - Bending capacity e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Roller drive 400 V / 3 x 1.1 kW - Hydr. drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. kg - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - PC 100 control unit in separate control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bending set for flat and angled material - Steel + plastic tube roller sets

Condition: used, Roll sets for profile bending machine HERKULES WETZLAR The rollers fit on a profile bending machine HERKULES WETZLAR type BO 238 N and also come from such a machine. Cgjbjglaq Is Hb U Hzet Shaft diameter 80/60 mm Roll diameter 160/180 mm Roll width max 180 mm The machine had 2 driven rolls weight of all rolls approx. 100 kg good condition

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm I-beam section - upend 120 x 120 x 13 mm Ceb Hb Ujtt Ecdo Hzsgt L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

Condition: used, Year of construction: 1989, Functionality: fully functional, It can quickly roller bend large beams up to HE 800 B and W30 US wide flange beams. These curved elements are widely used in steel structures such as airport terminals, sports stadiums, car parks, and shopping centers. The addition of the centre pulling roll enables the beams to be curved without any distortion to the section. Cob Hb Ueuphvve Hzjgt

Year of construction: 2004, Condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . Cjbjiwa Hce Hb U Hzogt -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: new, Year of construction: 2024, electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller individually adjustable - 3x driven rollers - divided roller segments - Digital position display for bottom/side rollers * Display with TouchScree function - Hardened tool holder (42CrMo4) - Machine base frame - 2x hydraulically adjustable side guides - Horizontal and vertical operation possible - Freely movable control panel - Pressure gauge / pressure display for the rollers - CE mark / declaration of conformity I-steel - upright: Cjb Hb U Houak Axezjgt 120 x 25 (d 1600) mm Max. raw diameter: 140 x 3 (d 3000) mm Angle steel: 100x100x10 (d 1600) mm Square material: 140 x 40 x 3 (d 4000) mm I - Steel - flat: 200 x 35 (d 1000) mm Solid material - diameter: 70.0 (d 800) mm Tool holder: 100.0 mm Roller Ø: 315 mm Speed: 5.4 m/min. Total power requirement: 11.0 kW Weight: 2,240 kg Dimension L-W-H: 1500 x 1650 x 2100 mm

Condition: good (used), Year of construction: 2017, APK 81 Shaft 80MM digital hydraulic side rolls in very good condition Cob Hb U Hetddwuezjgt

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Technical specifications: Welded steel construction frame 3 rollers are driven Csb Hjh Alh Heb U Hzegt Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, I - beam section - flat steel 80 x 20 (d 1200) mm I-beam section - upend 80 x 25 (d 2100) mm L-beam 50 x 50 x 6 (d 1000) mm bar material - diameter 40,0 (d 800) mm tube diameter 70 x 2 (d 1600) mm square material 60x60x3 (d 4000) mm total power requirement 4,75 kW weight of the machine ca. 1080 kg dimensions of the machine ca. 0,95 x 1,4 x 1,45 mm - hydraulic roller drive - Planetary gear delivery of the 2 lower rollers - for extra small bending radii - hardened tool holder (42CrMo4) - Standard roller set, hardened - lateral straightening rollers Cgsb Hb Ush Uaf So Hzjt - mobile control panel - 3 powered rollers - Digital display - Machine can be used horizontally and vertically - CE mark / declaration of conformity - User manual in German

Condition: new, bending tool diameter 1" bis 3" mm wall strength max. 16 mm pressure t weight of the machine ca. 26 Kg 0,6 x 0,3 x 0.3 m Cjb Hsu Dpbqob U Hzjgt

Condition: good (used), Technical data: 2 rollers hydraulically adjustable 3 rollers driven Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Cob Hb Uot Ukqas Hzegt Digital display Dimensions (length x width x height): approx. 2000 x 1700 x 1600 mm Weight: approx. 6.5 tons The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: Angle roll 250 mm, shaft diameter: 250 mm, roller diameter: 660 mm, type of input current: three-phase, Equipment: documentation/manual, emergency stop, Profile bending machine hydraulic -output shafts size 250 mm Equipped with traction tooling for H-beam HEB IPE UPN capacity chart see enclosed model AR250 MG brand make year 2016 Configuration -pyramid dual pinch side rolls independent hydraulic Cgeb Hb Ustpc Aie Hzot -3 rolls driven hydraulic and gear units each shaft. -Rollers size 660 mm adjustable opening to seat and bend the profiles -set of rolls for HEB IPE up to 300 mm - flat bar 200 mm square bar 125 mm , angle roll 200 mm legin / legout -Lateral correctors left/right side hydraulic operated in 3 directions -Traction tool hydraulic operated tensioning for HEB-IPE – UPN bending -Set of heads for tensioning HEB – IPE - UPN beam bending on the hard side -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual operate with Digital readouts -Electric power supply 3phase Vac -60HP hydraulic power unit with high pressure multi pumps 260Bar -Working speed variable slow-fast. -Emergency and safety shut-down devices -CE quality certificate. -Service manuals and operation books along with the machine.

Condition: new, Ring-profile bending machine Akyapak APK 81 I-steel - upright 100 x 20 (d 2100) mm raw diameter max. 100 x 3 (d 3000) mm angle steel 80x80x8 (d 2000) mm square steel 50 x 25 x 2 (d 600) mm I - steel - flat 120 x 30 (d 600) max.140b mm solid material - diameter 60,0 (d 1000) mm tool holder 80,0 mm Speed 4,2 m/min. Weight 1.600 kg Cjb Hb Usd R Iquj Hzsgt Dimension L-W-H 1240 x 1375 x 1540 mm Equipment: hydr. roller drive planetary gear feed of the 2 lower rollers for extra small bending radii hardened tool holder (42CrMo4) standard roll set, hardened mobile control panel 3 driven rolls digital display machine can be used horizontally and vertically CE-sign / declaration of conformity Operating instructions in German

Condition: new, Shaft diameter: 315working speed: 7motor power: 7,5length: 2000width: 1450heigth: 1700weight approx.: 3650 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls Cjb Hboh Alicj U Hzegt - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--

Year of construction: 2014, Condition: used, plate thickness 140 x 30 mm roll diameter 540 mm bending speed 0 - 5 m/min total power requirement 22 kW weight of the machine ca. 9,8 t dimensions of the machine ca. 2600 x 2500 x 1700 m Condition: VERY GOOD - ONLY approx. 100 operating hours - 2 hydraulically adjustable guide rollers - Hydraulic infeed of the lower rollers Cjb Hbegvkkaj U Hzogt - Stepless throughput speed - Planetary gears - Universal bending roll set - hydraulic Delivery of the front roller - Colorable control panel with digital display of the actual position of the lower rollers

Condition: new, tube diameter max. 3" Zoll wall strength 3 mm Cgob Hb Usupw Uuj Hzjt pressure 16 t weight of the machine ca. 45 Kg dimensions 0,8 x 0,6 x m 0,65 x 0,60 x 0,20 m

Condition: as good as new (ex-display), Year of construction: 2023, Technische Daten / technical details: 2 rollers hydraulically adjustable 3 rollers driven shaft diameter: 120 mm roller diameter: 390 mm lateral hydraulically controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 tons Cgeb Hb U Heuyyg Nszjt The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Year of construction: 1962, Condition: good (used), Manufacturer: VEB Type: RV16 Cgjb Hb Uoltiy Tj Hzjt Machinable cross-section: 120 x 140 mm Weight: 2,7 t

Condition: new, Ostas profile ring bending machine OPK 85 Technical specifications: - tool holder, shaft: 80mm - tool: 245mm - working speed: 6m/min - Engine: 4kw - Dimensions L-W-H: 1020x1460x1350mm - Weight: 1800kg - 3 rollers driven Cgob Hb U Hsfig A Nezet - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers - Digital displays (2pcs.) - Brake motor - According to CE-Norm

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Cob Hb U Heh Alh Rszjgt Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Condition: new, Year of construction: 2023, Profile Bending Machine ZOPF - Model ZB 110/3 H TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory Cgebjdkxibo Hb U Hzst - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 80 mm - roller diameter: 260 mm - shaft rpm: 7 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 2,2 kW - motor for hydraulic: 1,5 kW - hydraulic pressure: 27 to. - adjusting way: 170 mm - weight: 1400 kg - dimensions: 980x1430x1600 mm

Condition: new, Balkaya Profile Ring Bending Machine HBM 80 Technical specifications: Tool holder, shaft: 80mm tool: 245mm Cgjb Hb U Hjh T Ulnjzst working speed: 4,5m/min Motor: 4kw Hydraulics: 30 to dimension L-W-H: 1450x1050x18000mm weight: 1400kg 3 rollers driven Hardened standard rollers Hardened and ground tool holder, shaft Mobile control panel Horizontal and vertical working position Digital display According to CE standard

Condition: new, angle iron / side length: 80 x 80 x 8double T-iron over x-axis: IPN 120 IPN 80U-iron over x-axis: UPN 140total power requirements: 4weight approx.: 1700messurements (LxWxH): 1.450 x 1.000 x 1.400 Technical specifications Cjb Hjd Ab H Tjb U Hzjgt Shaft Diameter: 80mm Roll diameter: 245 mm Driven rollers: 3 Motor power: 4 kW Speed: 6 m/min. Bending performances (cross-section / min. diameter): Flat bar upright: 100x20 mm / 2000 mm; 80x20mm / 800mm; 30x10 / 300 Flat bar lying: 125x25 mm / 600 mm; 60x5mm / 300mm Square steel: 45x45 mm / 500 mm; 15x15mm / 380mm Round steel: Ø 50 mm / 500 mm; Ø 15mm / 380mm tube: Ø 100x2.5 mm / 1,200 mm; Ø 15x1mm / 380mm; Ø 3x5.48 / 800 mm; Ø 1/2x2.77 / 380 mm Form tube upright: 80x25x3 mm / 800 mm; 25x15x2mm / 350mm Form tube square: 70x70x3 mm / 1,300 mm; 25x25x2mm / 350mm Angle iron leg outside: 80x80x8 mm / 800 mm; 30x30x3mm / 400mm Angle iron leg inside: 70x70x7 mm / 700 mm; 30x30x3mm / 450mm UPN leg outside: UPN 140 / 1600 mm; RPN 120 / 900mm; RPN 100 / 800mm UPN leg inside: UPN 140 / 1,600 mm; RPN 120 / 1000mm; RPN 100 / 800mm IPN lying: IPN 120 / 600 mm; IPN 80 / 400mm gear 3 motorized rollers stable welded steel construction hydraulic Adjustment of the two bottom rollers Digital display of the bottom roller positions on a separate control panel lateral straightening rollers adjustable in 3 axes can be used horizontally and vertically Forward and reverse drive Machine and equipment according to CE regulations Options: NC Unit 7 Screen  EURO 9.000,-- We have more than 190 references!

Condition: new, Shaft diameter: 580working speed: 2-5motor power: 30length: 3000width: 2310heigth: 3100weight approx.: 16500 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal  working position - Hardened standard rolls - Mobile control panel Cob Hb U Hjh Alh Ujzjgt - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--