Used Sand blasting equipment for sale (135)

Condition: new, Year of construction: 2025, Functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, overall weight: 8,000 kg, inner dimension height: 600 mm, workpiece weight (max.): 20 kg, turntable diameter: 400 mm, The described shot blasting machine is designed for the automatic blasting or peening with selected media shots in accordance to the final finishing result to achieve. Part to be blasted will be positioned on suitable pieces’ holders that minimized the shadowing of the contact areas parts/jigs. The parts are inserted and extracted by an automatic cycle into the blasting/peening zones, by means of a step-by-step conveyor that can also operate in continuous mode. The parts, after passing through a neutral zone, are blasted / peened in the subsequent zones, prior unloading the parts are also blown. The system is equipped with one (1) loading/unloading position to allow easier loading/unloading during the process cycle Dkslq T Iowdgrzo Dkel Once the piece has been loaded with operator or automation, the cycle starts and the conveyor process a step forward, allows the newly loaded piece to enter the cabin and the simultaneous arrival of an already processed part at the unloading station. The machine works with masked times, therefore all the positions of the satellites equipping the conveyor are occupied in the cycle time, when fully operational. In the inner positions of the cabin the satellites rotate, and the shooting guns jets the blasting/peening media with a correct impact angle as from appropiate design.

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Dkelq T Ijwc Afhs Dkol SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), Functionality: fully functional, inner dimension width: 800 mm, inner dimension length: 800 mm, inner dimension height: 600 mm, The following sandblasting machines are for sale. When making your inquiry, please indicate which machine you are interested in: 1. Micropeen Peenmatic 1000 SK with filter tower, tilting hood, and blasting guns. Tilting hood, opening angle approx. 70° with filter tower, and blasting guns. Working area (W x D x H): 800 x 800 x 840 mm Overall dimensions (without filter tower): 1800 x 1900 x 2000 mm Weight: 530 kg (blast machine), 100 kg (filter tower) 2. HGH 6040 DUO Two blast machines in one housing with foldable front panel and 90° opening hatch Working area: 560 x 350 x 250 mm Dkjlorhidxsq T I Dksl Door dimensions [mm]: 600 x 230 mm Cabin dimensions [mm]: 1300 x 720 x 1500 mm Workpiece weight [kg]: max. 100 kg 3. HGH 7050 with foldable front panel and 90° opening hatch Working area: 680 x 450 x 300 mm Cabin dimensions: 855 x 830 x 1400 mm Door dimensions: 750 x 280 mm Max. workpiece weight: 100 kg

Condition: good (used), Year of construction: 2016, operating hours: 994 h, Functionality: fully functional, Manual blasting system including integrated extraction system. Turbine type: 2 x TC 260 D Dkelq T I Djwbhmbjkjl Delivery/customs clearance available upon request. Inspection and test run available upon request.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 24,065 h, Functionality: fully functional, machine/vehicle number: 210001, total width: 3,300 mm, total height: 5,950 mm, total length: 4,900 mm, power: 77 kW (104.69 HP), Equipment: lighting, Description: OMSG LAUCO 200 NS6 shot blast machine, including filter system with roller conveyors: The LAUCO shot blast machine redefines the cleaning process with a continuous tunnel chamber fed by a horizontal inlet and outlet roller conveyor. Its versatile design adapts to different workpiece sizes and ensures cleaning in a single pass. After the treated workpieces have passed through the blast chamber on driven roller conveyors, they exit the machine free of abrasive residue thanks to integrated brushing and blow-off devices. Blasting of steel plates and profiles: Ideal for steel plates and profiles. Pipe cleaning: Ensures the internal and external cleanliness of pipes and lines. The length of the external roller conveyor can be adjusted, with variable speed control. For the external cleaning of pipes, LAUCO systems have the same technical features as for blasting sheet metal and profiles, with special profiles on external roller conveyors. Operating instructions and technical description are available. System is fully operational and dismantled. Technical specifications: Operating hours: 24,068 h Workpiece width (mm): 2,000 Workpiece height (mm): 500 Total power: 77 kW Number of turbines: 4 Turbine diameter: 380 mm Turbine motor power: 11 kW Separator type: pneumatic Delowb Akzoq T I Dkekl

Condition: used, Year of construction: 2011, operating hours: 30,300 h, Functionality: fully functional, power: 130 kW (176.75 HP), Continuous Overhead Track Blasting System with Extraction Djlq T I Dout Tv Nokjkl Name: Overhead Track Blasting System Manufacturer: Wheelabrator System Type: Schlick DHB 6/16 Circular Conveyor Type: Caldan Chain Conveyor Blasting Wheels: 8 x 11 kW Consisting of: - Complete Blasting House - Chain Conveyor - Control Cabinet - Extraction Total Width: 15,500 mm Total Height: 6,400 mm Total Depth: 10,000 mm Blasting House Internal Dimensions: - Height: 1,800 mm - Width: 700 mm - Length: 8,012 mm Maximum Part Weight: 80 kg Control Cabinet Dimensions: - Width: 3,000 mm - Height: 2,200 mm - Depth: 500 mm Available now Viewing is possible immediately!

Condition: new, Year of construction: 2025, Functionality: fully functional, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 2,400 mm, total height: 4,500 mm, total length: 3,800 mm, overall weight: 3,800 kg, inner dimension height: 600 mm, turntable diameter: 350 mm, Shotblasting machines with rotating satellites type PTR and SSR are designed to treat sensitive parts in singularly mode with any kind of shots. The nozzles are managed by a robot. The machine is equipped with a main indexed table that works as a pallet exchanger enabeling the entrance/exit of the parts into/out to the blasting chamber. The main table is equipped with 2 or 4 satellites; in accordance with production rate. One station is dedicated for loading/unloading, while another one (opposite to the loading area) is dedicated to the blasting/peening process. The nozzles are driven by a robot. The number of nozzles is defined according to the loading volume, the production rate and the geometry of the pieces. This machine is usefully for manual loading/unloading operation but it can be also equipped with an automatic handling device according to the process line request (2-axis gantry, robot…). Ventury system or Pressure type technology can be installed on such equipment. Installation of Magnetic Valves for shot flow check is also recomended. The machine can be equipped with up to three robots for peening. Dkjlq Tswdgpgj I Dkel

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 105104, compressed air connection: 6 bar, total width: 7,000 mm, total height: 8,000 mm, type of input current: AC, workpiece weight (max.): 630 kg, outer dimension width: 7,000 mm, outer dimension length: 7,000 mm, input current: 260 A, working range: 6,300 mm, Equipment: documentation/manual, front-end loader, 6 turbine steel shot blasting machine with extraction and sound proof enclosure. Dkolsv S D Speq T I Dkol

Condition: new, Model Name Djlq Teup H Anj I Dkokl SSK 4

Condition: good (used), Year of construction: 2008, Functionality: fully functional, power: 2 kW (2.72 HP), Sales: SGT Strahlmaschinen AG, Switzerland; Turbine type: 2 x TC 260 D; 2 x 4 kW Dslq T Iewbhkas Dkskl

Condition: like new (used), Year of construction: 2022, operating hours: 131 h, Functionality: fully functional, air demand: 55 m³/h, compressed air connection: 8 bar, operating pressure: 6 bar, type of input current: three-phase, inner dimension width: 1,500 mm, inner dimension length: 1,600 mm, inner dimension height: 1,300 mm, input current: 16 A, input voltage: 380 V, Equipment: cabin, documentation/manual, lighting, MHG SMG 300 S Blasting System - Injector Color: RAL 7024 Graphite Gray - Intake silencer to minimize intake noise - Two lockable side doors, double-walled construction, soundproofed for noise reduction. - Viewing window, 320 x 500 mm, made of safety glass, installed in a quick-change frame, replaceable without special tools - LED lighting (can be switched off) - Blasting media recovery system type 255 - MHG filter cabinet type DUST-EX 1703 - Manually rotatable turntable (diameter 1,040 mm), load capacity up to 1,000 kg Dkelq Tev Ux Spe I Dkjl - Only 131 operating hours - Used with glass beads

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Dkslov Idf Isq T I Dksl Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). Dolq T Ijwdgi Hj Dkokl The process can be manual or fully automated as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: used, total width: 13,500 mm, total height: 4,500 mm, total length: 30,500 mm, Processes used: Nickel Chromium Nickel-phosphorus Sulfuric acid pickling Dkslq Tov Umkyo I Dkjl Software ICOM Automation GmbH

Condition: new, Year of construction: 2025, operating hours: 1 h, Functionality: fully functional, We offer a new table blaster - high-quality Czech production, quality materials used in production. Type - TS 330/1. - Diameter of the rotary table - 1000 mm. - maximum height of the blasted part - 550 mm. - total height of the machine - 2750 mm. - 1x blasting turbine - power input - 5.5 kW. - bucket conveyor - power input - 0.75 kW. - total power input of the machine - 7 kW. If requested by the customer, the device can be supplemented with a frequency converter - speed control of the blasting turbine, for a price of + 850 Eur. Dkolq T I Djwa Ixnekjl A great advantage of the machine is the possibility of changing the direction of the turbine rotation to clockwise or anti-clockwise rotation. filter device with power input - 0.55 kW. Blasting equipment with CE certificate. Another advantage of the device is high efficiency in blasting, quiet operation, low energy consumption and also the requirement for a small space for placing the device. In its category, this table-top blasting machine, with its concept, can be considered very perfect. (Sandblaster, sandblasting, blasting, sandblasting, blasting, blaster). Blast machine

Condition: excellent (used), Functionality: fully functional, Satellite blasting system from Nicolis; 6 satellites with rotary motion; horizontal up/down motion with up to 6 nozzles, individually switchable; Djlqowbhb Ss T I Dkskl Maximum component size: height 320 mm, width 230 mm. System was used only for demonstration and testing purposes and is being sold due to disuse. Delivery/customs clearance available upon request. Inspection and test run available upon request.

Condition: good (used), Year of construction: 2022, Sandblasting cabin Elmag PAL 4 XL with suction cyclone and dust bag, year 2022, Max. workpiece size approx. 90 x 130 x 70 cm, working pressure 1,5 - 8 bar, safety foot pedal (start-stop), cyclone separator for abrasive recovery, ser.no.213533, glass pane has one crack Dkolqslfcqgj T I Dkol

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, 1,200 x 1,600 mm blast opening Electromechanical double-leaf door 3 SR 380 blast wheels, each with 7.5 kW Bucket elevator, catcher, and screening system Pendulum device for oscillating hooks S7 control system with customized recipes Dkslov S Ud Nsq T I Dksl Frequency converter for blast wheels Chain hoist with electric trolley

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, Dksleqcuvwsq T I Dkol simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2005, This is a programmable sandblasting machine with a working area of 100x100mm. Includes documentation and instructions. The machine dimensions are: WxDxH - 1300x700x1750 Dolqjv Rcyco T I Dkskl

Condition: excellent (used), Year of construction: 2014, operating hours: 550 h, Functionality: fully functional, machine/vehicle number: 1402, We offer continuous blasting equipment - TTP 1000/600, a machine with 4 Cogeim turbines. Blasting opening - width - 1050 mm height - 600 mm Power input of each turbine - 7.5 kW Bucket conveyor - 2.2 kW Longitudinal screw conveyor - 2.2 kW Transverse screw conveyor -1.5 kW Roller conveyor drive with frequency converter - left + right rotation - 2.2 kW Material blowing fan - 11 kW Blowing device lifting mechanism - 0.18 kW Cogeim automatic filtration unit - power input 7.5 kW, output - 7000 m3/hour. Roller conveyors - 24 m Number of hours worked - 540. Dkolewabd Rjq T I Dkol Equipment with complete documentation.

Condition: new, Year of construction: 2025, Functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. Dolq Toun R N Ao I Dkekl ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: ready for operation (used), We offer 4 pieces of reconditioned Schlick turbines, 320 mm, including 7.5kW motors. The price listed is for 4 pieces complete. Price for 1 piece - 3000 Eur. Dkelq T Iovphf Uj Dkol

Condition: new, Basic TWO Blasting Container – A New Standard in Sandblasting Introducing the SAPI Basic TWO Blasting Container—a true milestone in the sandblasting industry, designed with dual-container space to maximize functionality and efficiency. With its spacious layout and innovative features, this advanced sandblasting solution is perfect for professionals who need more room for their work without compromising on quality and performance. The Ideal Solution for Maximum Efficiency For companies seeking a comprehensive, practical, and high-quality sandblasting solution, the SAPI Basic TWO Blasting Container is the perfect choice. With its exceptional features and thoughtful design, it raises productivity and quality to a new level in the sandblasting industry. More Than Just a Container – A Complete Professional Solution The SAPI Basic TWO Blasting Container offers the perfect balance of space, functionality, and cutting-edge technology. Thanks to its innovative design and premium features, it is not just a simple container—it’s a fully operational solution that takes sandblasting to the next level of efficiency, effectiveness, and safety. Whether for large-scale projects with demanding requirements or precise detail work, this system provides the space, tools, and technology needed to complete the job efficiently, safely, and professionally. Key Features ✔ Spacious Blasting Area & Technical Room – The dual-container design provides ample workspace for sandblasting while ensuring a separate technical room for optimized workflow and easy equipment access. ✔ Plug-and-Play Convenience – The SAPI Basic TWO Blasting Container is designed for ease of use, requiring minimal setup so you can start blasting immediately. ✔ Enhanced Air Quality – Equipped with the SAPI Air Filter, the container ensures a cleaner and healthier work environment by effectively controlling dust and airborne particles. ✔ Dual Cleaning Modes with 5kW Abrasive Vacuum Turbo Cleaner – Efficient handling of abrasive recovery and cleaning with two modes for maximum flexibility and control during operation. ✔ Durable, Rubber-Coated Walls – The interior walls are lined with heavy-duty rubber, ensuring resistance to intensive sandblasting operations while extending the lifespan of the workspace. ✔ Bright & Well-Lit Work Areas – Three high-powered LED lights are strategically placed to provide optimal visibility, ensuring precision and safety during sandblasting. Dkelq T Isupzt Uj Dksl ✔ Robust Premium 200-Liter Sandblasting System with Cyclone Cleaning – The powerful 200-liter system enables efficient and continuous blasting, while the integrated cyclone cleaning system improves abrasive quality, reduces waste, and boosts productivity. Blasting Room Dimensions ✔ Depth: 4.40 m ✔ Total Width: 2.25 m ✔ Total Height: 2.65 m

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose Dkolq Toupyw Es I Dksl ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment