Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm Fjhxypdsh I Ahxjijgb largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: ready for operation (used), Year of construction: 2012, operating hours: 76,609 h, Functionality: fully functional, machine/vehicle number: 85215, resolution (max.): 600 dpi, input current: 30 A, input voltage: 400 V, The machine features a machine-controlled (Siemens) roll-to-roll extension. The roll unwinder has a capacity of approximately 2000 linear meters. The rewinder features a scissor-cut slitter with six blades for separating the webs or cutting the hole edges. The entire system is open for inspection and is in immaculate condition. The machine was fully serviced until February 2025. There is no maintenance or repair backlog. Various spare and wear parts, as well as toner, are still available and included in the offer. Fgjhsv Izxxoxypdijb

Condition: used, connected load frequency 230 V Perforating/creasing machine Grafiscor Year of manufacture unknown Working width up to approx. 42 cm - Underfloor suction feeder Fgjhxyowfxlcepdisb - Alignment section with ball bar - Delivery The machine was assembled by the previous owner from various devices/parts as a self-construction.

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Fehxypswh Rvredisgb Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be further processed directly and faster.

Condition: ready for operation (used), Round pile feederM1 digital control4 plates2 knives (KTL) Fgohxyewgy Riopdieb Optional FA66 presser stacker delivery

Condition: used, Used Bäuerle spindle moulder Model ZM Fgehjwh N Efexypdieb Motor 5.5 HP / 400 Volt Right/Left rotation Speeds 3/5/6/10,000 rpm Table size approx. 1100 x 900 mm Table height approx. 825 mm Including sliding carriage Including HolzHer 3-roller feeder Weight approx. 850 kg

Condition: used, Year of construction: 2007, Format: max. 540x1000mm; min. 100x148mm Paper weight: 40-250g/sqm Loading capacity: 55mm Output: max. 45,000 cycles/h compatible with: Horizon AFC-544AKT, Horizon AFC-546AKT Fjhxypdoup Ut Ujisgb Horizon AFC-564AKT, Horizon AFC-566AKT Horizon AFC-566F, Horizon AFC-566FKT Weight: 518kg good working condition available at short notice

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 60823, cutting width (max.): 1,550 mm, insertion depth: 1,630 mm, insertion height: 165 mm, table height: 1,012 mm, cutting length (max.): 1,550 mm, overall weight: 2,000 kg, type of input current: three-phase, input current: 17 A, input voltage: 220 V, Equipment: safety light barrier, Schneider Senator 155 Guillotine Paper Cutter – Available for Quick Sale Fjhxypdswhml Nsiogb This Schneider Senator 155 guillotine cutter is still in daily use and operates without any issues. It's a reliable and robust paper cutting machine with a 1550 mm cutting width, suitable for large format materials and high-volume production environments. The machine is being replaced due to an internal equipment upgrade and is therefore available for a quick sale. Details: - Cutting width: 1550 mm (61 inches) - Fully operational and currently in daily use - Clean cuts, consistent performance - All spare parts included, such as an extra sets of knives - Well maintained and in good condition This is a solid and trustworthy machine that can continue to serve in production for many years. Ideal for companies looking for an affordable and functional industrial cutter with proven reliability.

Condition: excellent (used), Year of construction: 2009, Details: • KH-66 combination folding machine with BUH-66 first folding station • Max. sheet size: 66 × 128 cm / Min. sheet size: 14 × 18 cm • Max. folding speed: 230 m/min • Incl. FFH-66 flat pile feeder & SBP-46.H vertical stack delivery Fgshxypdjwfxw Seijb • High-performance kit & soft PU folding rollers • CUH-66 cross-fold unit with segmented sword blade • Intelligent MCT control & CE conformity kit

Condition: excellent (used), BM5139 High Qaulity paper drilling machine. Professional production equipment standing model electric operated - foot pedal triggered heavy duty construction For paper, plastic, textiles, leather - two speed drilling. Fgshxypsv Idfnsdiob With automatic lift - two button or foot pedal operated. You are welcome to test this machine with us. We can arrange transport/packaging and loading onto truck or in container. Ask for our price - but your offers are also welcomed.

Condition: excellent (used), Year of construction: 2015, Specifications: Maximum speed: 18 m/min Feeding: Automatic Feeding system: Vacuum belt Feeder loading capacity: 30 cm Overlap control: Infeed screw control Overlap accuracy: +/- 2 mm Separation: Automatic Paper weight: 115 - 500 g/m2 Main roller pressure: Pneumatic Integrated compressor: Included Min. Sheet size (W x L): 15 x 15 cm Max. sheet size (W x L): 38 x 66 cm Max. output: 2100 sheets/h Temperature control: 80 - 140 °C Warm-up time: 8 min Power supply: 230 V AC, 50-60 Hz Power: 3000 W Floor area (W x L): 82 x 198 cm Weight: 320 kg Fgshxypewh U Dasdieb Non-stick roller: Standard Jogger 400: Included

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: Fgshovqbhljxypdieb - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2016, 1 off Heidelberg VFZ-52 Mobile Knife Unit Fgshxyswab Txepdiob

Year of construction: 2012, Condition: used, UV drying tunnel MGI Fshxyewd Hcmspdiogb

Condition: good (used), Year of construction: 2006, Offer includes: Heidelberg ST400/450, built in 2006 Fgohxypjwfxvnedisb 6 ST450 feeders

Condition: excellent (used), overall weight: 170 kg, Equipment: clamp, The BookMaster and TrimMaster units are built for manually fed sets. The paper format is set manually in a few seconds. The BMS unit starts automatically as soon as a set is fed into the unit by hand; approx. 10 seconds after the last feed, the machine switches off automatically. Fjhjv A Ux Isxypdijgb Note: Wait until the booklet leaves the unit before feeding another set. Block stapling and corner stapling are possible using the 3rd stapling head. Booklet production without staples (only folding) is also possible. Machine works with staple magazines of 5000 staples each. Max. sheet format 482 x 320mm // Min. sheet format 210 x 140mm Max. stapling distance 138mm // Min. stapling distance 115mm Max. brochure thickness 22 sheets (80g/m²) Max. cutting length 25mm BookMaster (W, D, H) 546, 495, 595mm, 70kg TrimMaster (W, D, H) 546, 650, 595mm, 85kg Delivery conveyor (W, D, H) 404, 1050, 720mm*, 17kg 230 volts. The trimmer blade is new and the machine has been completely overhauled. Machine works without defects Operating instructions are of course included. Our offers are for used machines, which may show signs of use (minor scratches or yellowing).

Condition: excellent (used), Year of construction: 2009, HORIZON VAC-60Hm gathering tower with suction and blowing air, 6 stations Fgshxypdewhyzdeieb

Year of construction: 2007, Condition: used, Case maker Hoerauf BDM Speed Year: 2007 The BDM Speed is a high speed casemaker with an output of 85 cases per minute, specially designed to meet the requirements of medium and large size companies, for the production of book cases with rigid or flexible spine, as well as one-piece cases for ring binders and letter files. Description: - Colour monitor - Automatic setting - Board pre stacking conveyor - Board magazin - Board cutter: KS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Pressing station - Stacking delivery - Pump Palletiser Fehxyjvcmilopdijgb Solema Cartesio Year: 2006 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system Hörauf (also known as Hoerauf or Horauf) Size range opened case (max): 680 x 380 mm Size range opened case (min): 190 x 130 mm Max. mechanical speed: Up to 85 cases/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2006, working width: 780 mm, stack height: 1,200 mm, input voltage: 400 V, Equipment: compressor, Pallet feeder FP120 with Vaculift Vivas suction wheel Vacutable 4 folding pockets 2 knives, cross fold, three-fold on the left MWK knife shaft cassette Fgehxewhzhlsypdieb Side pocket after the cross fold Navigator standard control AS540 delivery Coupling box XB857 30-pin/24-pin Werie Rietschle KTA 80 compressor Spiral folding roller, the first folding roller is new

Condition: good (used), Year of construction: 2015, Standard equipment Fgjhxypstqcynjdiob

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter Fgohjwdgfzoxypdiob - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), A complete set of electronic parts (complete control cabinet for K800.2) (Navigator standard circuit diagram N05.040) Vaculift 2 complete Compressor Werie Rietschle KTA 80 Fgjhxypdswhx Nmeisb Images will be sent immediately

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 142.P Year: 2005 Description: - Automatic setting - Co-Pilot with touchscreen Fjhxypdjwc Txxjiogb - Right hand infeed - Automatic hopper feeder for inline production - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 1 Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 310 x 430 x 80 mm Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/hr Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2005, machine/vehicle number: 106880130801, NC/MC control 30-pin/24-pin control plug Navigator control/MC control Circuit diagram no. N05.013 Fshxypdetidavjijgb

Year of construction: 2019, Condition: used, Case maker KOLBUS DA 270 Bookjet Edition Year 2019 For fully automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Description: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation proces - Counter stacker delivery with following roller conveyor - Cloth cylinder with grippers and exchangeable plates for rubber pa (5 pieces 500 mm wide and 5 pieces 720 mm wide, incl. 10 pieces of rubber pads) - Centre strip pressing device (head / tail) - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D additional equipment - Without centre strip roll device - Board centre strip cutting device (cross centre strip) Fshxyor Aba Sopdisgb For processing digital print products of varying centre-strip. - Device for cutting rigid centre board strips to width, with possible width variation from cycle to h data coupling via AFS 702.W with input and output code reader for digital print finishing - Processing of Hotmelt with premelter LH 375.B Technical specifications: Open cover size: Max. 670 x 390 mm Min. 205 x 140 mm Joint width: 4 - 15 mm Spine width: 14 - 120 mm Turn in width closed: 8 - 15 mm Cloth: Width: 223 - 708 mm Height: 130 - 428 mm Boards: Thickness: 1 - 4 mm Width: 95 - 328 mm Height: 140 - 390 mm Board centre strip: Thickness: 1 - 4 mm Width: 6 - 90 mm Mechanical speed: up to 65 cycles/min