Used Label Systems for sale (120)

Year of construction: 2021, Condition: new, Functionality: fully functional, New automatic saw-splitting machine with electric motor drive - 400 volts - 7.5 KW - 1450 rpm - max. 6 tonnes splitting force - max. splitting length 50 cm - max. diameter 33 cm - mechanical saw operation - hydraulically driven feed belt - mechanical splitting tool adjustment - mechanical saw operation - weight 750 kg Bwobvpvjv E Hnmoypol

Condition: excellent (used), machine/vehicle number: 9056423, WITH COLOR RIBBONS Config. No.: 096-104-00404 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Bwsbvpvysvf Ifaopsl Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm

Year of construction: 2008, Condition: excellent (used), Label printer, Label Printer cab A4+ M/300 Bjbvpjvytgrovypjwl Good used condition. You will receive, as shown: printer, power cable, service manual booklet. Driver software, spare parts catalogs, operating instructions can be found on the manufacturer's website - support.

Year of construction: 2016, Condition: good (used), PRATI STARPLUS 450 – Turret Rewinder Year of Manufacture: 2016 _____ Machine Specifications and Equipment: Bjbvpvswgm Rcsypjwl  Web width: 450mm / 17-inch  4-Spindle glueless turret rewinder  automatic core loading with automatic core positioning on shafts  automatic roll closing system with label printer and applicator  fastcut automatic slitting station with lower knife positioning system and self-sharpening knives  web turner bar for inside/outside rewinding  auto-teach software for job storage  counters for standard and transparent labels _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2019, Condition: like new (used), overall weight: 947 kg, working width: 320 mm, input voltage: 400 V, roll diameter: 330 mm, machine/vehicle number: A7X5023000109, - Printing width: 320 mm - Roll width: 330 mm - Resolution: 1200x1200 dpi x 8bit 1200x3600 dpi On 07.09.2022 - after disassembly and transport to the warehouse, it was checked by the service department, which found no deficiencies, or damage. The whole set consists of an unwinder, printer and rewinder, which allows you to print most self-adhesive media. Bwebvpvyjp S N Snjpel - Media feeding speed: 19m/min, 13.5m/min, 9.45m/min. - Speed depends on the type of paper - Dimensions: 3869x1480x1138 mm - Weight: 947 kg - Power supply: 400 V/50 Hz

Condition: used, Year of construction: 2017, operating hours: 1,421 h, Functionality: fully functional, The Easymatrix 106 C or Easymatrix 106 CS is a high-quality, EC-compliant embossing and punching system that represents the state of the art. Bjbvewfdlnepvypjwl

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 773, paper width (max.): 260 mm, 8-Color Semi-Rotary UV Offset TECHNICAL DETAILS Printing process: Semi-rotary waterless offset for labels, PVC, and films Inking units: 8 (with UV) Bwsbvpvswgbq Rsypol Print type: 4+4 UV offset Print width: max. 260 mm Print format: max. 250 mm Speed: 50–180 Material flow Material feed: Roll to roll Unwind unit: included Rewind unit: included EQUIPMENT - Unwind unit - Rewind unit - UV drying

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Bwsbevf Inbovpvypol Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: used, Year of construction: 1994, Functionality: fully functional, material width: 300 mm, working width: 290 mm, Equipment: documentation/manual, Nilpeter B 3000 ,year 1994 . - 6 x UV letterpress + UV drying, 1 x UV flexo , 3 x rotary die-cutting station, 1 x unwind station, 1 x rewind station, 5 x automatic electronic register control + Corona treatment, 1 turn bar, • Max. Web Width: 300mm,min web width 110mm, • Spare uv box for screen station, Command unit for the uv station plenty of rubber rollers for uv unit... • Operating instructions and electrical diagrams in English Bsbvpvyev Rpc Ropswl

Year of construction: 2007, Condition: good (used), Machine Specifications and Equipment:  2 × Hot foil stamping stations  1 × Flatbed die-cutting station  1 × Register sensor for precise label positioning General Specifications:  Max. web width: 150 mm  Max. print area per station: Approx. 127mm × 127mm  Max. foil width: 130 mm per stamping head  Substrate types: Self-adhesive label materials (paper, PP, PE, PET)  Foil feed: Programmable, with tension control  Web feed system: Intermittent motion with precise servo control  Register system: Optical register sensor for pre-printed label alignment  Max. speed: Up to 4,000 impressions/hour (depending on job setup and material)  Control system: PLC-based, with touchscreen interface (model-dependent)  Power supply: Typically 400V / 3-phase / 50Hz Bebvewd I Dxspvypjwl  Compressed air requirement: Approx. 6 bar

Condition: used, Functionality: fully functional, total height: 2,070 mm, total width: 2,590 mm, total length: 6,535 mm, pressing force: 320 t, type of input current: AC, input voltage: 400 V, overall weight: 15,000 kg, control voltage: 230 V, pressure: 6.5 bar, frequency: 50 Hz, compressed air connection: 8 bar, punching force: 320 t, Well-used die-cutting machine from Wupa. The machine is in production and can be inspected at the customer's site! It is an A-version full-sheet delivery with a non-stop roll-on blanket and gripper edge separation. In front of the machine is a Mabeg feeder with a manual non-stop device. Machine speed: 6500 sheets/h Maximum stack height of feeder: 1500 mm Bwjbvowchbhspvypjl Maximum stack height of delivery: 1300 mm Connection values Power: 27.5 kW Current: 66 A Voltage: 400 V Material: Corrugated board, max. 5.5 mm Sheet weight: 100-1000 g/m² Largest sheet format: 800 x 1120 mm Smallest sheet format: 360 x 500 mm Gripper edge adjustable from 8-14 mm

Year of construction: 2016, Condition: used, Print Width: Up to 340 mm Maximum Print Speed: Up to 200 m/min Bsbvpvyswcc A Hopewl Material Unwinder - Front loading - Transport device with tape tension measurement - Max roll diameter: 1000 mm - Pneumatic spindle - Controlled unwind tension via adjustable dancer - Adjustable unwind tension - End of roll detection - Joining table - Ultrasonic edge control - Mobile touch screen control panel - Centralized machine infrastructure control Corona Treatment - 1.5 kW generator - Pre-treatment head - Includes exhaust fume outlets Multi-process base unit - Robust construction with granite base - Accommodates two process stations - Two base platforms for flexo printing or die-cutting groups - Manual diagonal register adjustment for each station - Includes paper path extension in the last station for varnishing - Interface for connecting cooling water and compressed air - Includes decentralized control Flexo Printing Unit - Flexo printing unit with aluminum sleeve cylinder - Refrigerated counter-print cylinder - Direct servo drive for print and counter-print cylinders Rotary Screen Printing Unit - Dual servo drive for format length adjustment and correction Upper Rails for Multi-Process Unit - Upper rail without control interface, compatible with laminating devices and waste rewinders. UV Drying System (9 positions) - Continuous power control relative to machine speed Die-cutting unit Rotary Die-Cutting with Front Loading (with cutting depth adjustment) Waste Rewinder Plus

Condition: excellent (used), Year of construction: 2003, material width: 430 mm, 8-color UV flexo printing machine with lifting crane Web width 430mm Print width 420mm Unwinding 1000 mm Printing length from 8" to 24" Web run BST web edge control Web cleaning Teknek, both sides Printing units 8x Drying 8x IST UV drying (one unit defective) On rail 1x Delam-Relam, 1x turning cross Web monitoring E+L scan Punching 3x punching modules Bebvpvyjqa A Imjpjwl 1x double module, of which punching unit 1 is equipped with Gab-Mater 1x single module, before winding Winding 700 mm max. outer diameter Materials 15my film up to 350g/m2 cardboard Drive with vertical shaft, no servo without chiller with lots of accessories

Condition: excellent (used), machine/vehicle number: 5950798, WITH EMBOSSING UNIT FROM ABOVE AND BOTTOM Equipment / Additional information: Bwebvpvjvf Iuboypjl With heating Also very interesting for the textile industry

Condition: excellent (used), Functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. Bwsbvpewck U Rjvypsl • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: good (used), Mirus Anleger printing machine, in working order. Bwobsud Awvsvpvypel

Condition: good (used), Year of construction: 2010,  6x OFFSET UNIT  2x FLEXO UNIT  9x IS BLK 200 w  double technology  1 x CORONA  Nikka 4K inspection camera + monitor  BST register camera + monitor  Crossbar unit  6x ink dust extraction  Rubber blanket mounting table  Offset plate mounting table  software with Pre Press Interface  Baldwin water control  Clear Flo water cleaning system  Hafner – Muchler cool/warm system for the inking units (rubbing rollers) Bwobvowbgzkspvypsl  Unicold cooling system for the UV units _____

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Used Labelmen PW180 DL HNC 2003 [Ref: L180]. This machine is still being sold my the manufacturer. Bwjbvpvsrqhcnjypjl If you purchase, you can receive free of charge and older version of this machine without a servo. A UV lamp is also available for sale for 1500 eur to be used with this machine, as well as a rewind unit for 3000 eur.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, - 5 printing units (UV flexo printing) - Conventional doctor blades with dip roller - 1x die-cutting unit (magnetic cylinder die-cutting) - Knife unit for side cutting (shear knife) - BST web monitoring system - 1x corona pre-treatment unit - 2x Teknek (top + bottom) Material cleaning device - Maximum web width 280 mm - Sensotec control mark - Core diameter 76 mm Bebvpvyjq Nmavjpewl - Max. Outside diameter 740 mm (infeed) - Max. Outer diameter 700 mm (outlet) Accessories: - 12 anilox rollers - Magnetic cylinder: Z96, Z98, Z118,

Condition: good (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 773, paper width (max.): 260 mm, 8-Color Semi-Rotary UV Offset TECHNICAL DETAILS Printing process: Semi-rotary waterless offset for labels, PVC, and films Bsbvpvyjwbhtbepswl Inking units: 8 (with UV) Print type: 4+4 UV offset Print width: max. 260 mm Print format: max. 250 mm Speed: 50–180 Material flow Material feed: Roll to roll Unwind unit: included Rewind unit: included EQUIPMENT - Unwind unit - Rewind unit - UV drying

Year of construction: 2003, Condition: good (used), price. GALLUS EM 280 – 8-color Year of Manufacture: 2003 _____ Product Description:  Webwidth: 280mm  8 flexo printing units, set for quick unit change  8 UV curing Is with water cooled chill roller  8 pneumatic doctor blades  Unwinding, splice table, web guide,  Rewinders  Infeed unit Spindle 3”  Diecut station for 2 diecuts with 1 diecut unit, 2nd position empty  drive unit standard  label counter  mech matrix removal unit spindle 3”  output section (pull station)  rewinding unit  pneum winding spindle 3”  tension roller  web break and 1 matrix break detector  Razor knives  Automatic register control (including diecut) Machine Specifications and Equipment: _____ Accessories Included:  3 sets of printing cylinders and anilox rollers  Manuals  Keys Bobvpvowa Aaaoypswl  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2000, Condition: good (used), 1x unwinding unit, 6x letterpress unit, 1x flexo coating unit, 1x semi-rotary die-cutting unit, Bebek N U Imjvpvypowl Rewind / web width 340 mm, Format length min 155 mm Format length max 305 mm printing width max 340 mm with many accessories, new spare parts approx. EUR 15.000,00 Machine was overhauled 2 years ago, perfect condition.

Year of construction: 2025, Condition: new, Lifting capacity up to 250 kg Roll width up to 500 mm Universal compatibility – Works with most printing and converting machines Bobvpevrci Tsvypewl Safe & maintenance-free We would be happy to provide you with a detailed offer.

Year of construction: 2025, Condition: new, Jumbo roll width max 450 mm Jumbo roll diameter max 1000 mm Rewind diameter max 500 mm o Die cutting (roll-to-roll): 120 m/min o Labeling (roll-to-sheet): 120 m/min o Printing with UV drying: 90 m/min Bjbjvq I Nijvpvypowl o Compatible with magnetic cylinders from 12" to ~24" Optional functions: o Magnetic cylinder holder: Adaptable to existing die cutting units. o iKnife Automatic knife positioning system: Available as an additional option. Ask us. We will be happy to provide you with a detailed offer.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 400 h, material width: 450 mm, working width: 450 mm, Material width 450 mm Print width 445 mm Jumbo rolls D 1000 mm Print length 228.6 mm to 609.6 mm 8 flexographic printing units 8 UV cassettes 2x hot air drying Printing speed max 150 m/min Feed printing unit +/- 4 mm Punching width 450 mm Punching length from 304.8 mm to 609.6 mm Bobvpvsqa Ax Neypewl Rewind diameter D 800 mm Materials to be printed: Self-adhesive labels (paper, PET, BOPP, PVC) Paper from 30 to 200 gsm Film from 20my (BOPP), 35 my PVC/PET, shrink 12 my PET Cardboard up to 400 gsm Accessories: 16 impression cylinders 8 anilox cylinders 1 die-cutting cylinder 1 IEEC corona treatment (one-sided) 1 Meech web cleaning unit (double-sided) 2 punching units optional 1 turning cross 1 Delam/Relam 1 Coldfoil unwinder 8 LED cassette dryer GEW We would be happy to make you an offer.