Used other post press machines for sale (377)

Year of construction: 2001, condition: used, Hard cover book line VBF / Muller Martini Diamant Year: 2001 Description: - Semi automatic setting - Book measuring table - Stand-alone pre-heating device: IR - Infeed conveyor - Starfeeder - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case infeed device - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump - Hotmelt nozzle glue system for joint gluing in casing-in section Building in machine VBF / Muller Martini EP 680 L Year: 2000 Description: - Book forming station - Delivery - Delivery to the left Book stacker VBF / Muller Martini BLSD 600 D Dodpfxsyid Nwe Ahbjuw Year: 2001 Book block format (max): 380 x 270 x 80 mm (hxwxt) Book block format (min): 100 x 100 x 4 mm (hxwxt) Size range opened case (max): 660 x 390 mm Size range opened case (min): 190 x 105 mm Max. mechanical speed: 3.600 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Dsdpfx Ahoyi Emysbeuw Description: - 2 pressing stations

Year of construction: 2004, condition: used, Conveyor tower Ambaflex SV-400-1800-HS - Kolbus XAF 660 Year: 2004 Dodpfx Aozi S Amshbouw Description: - Length of conveyor: +/- 28 mtr

Year of construction: 2018, condition: used, BECKER Air-Center VARIAIR type CS 0133.0112 year 2018 Dusdpfjzi Sc Tox Ahbsw Provides compressed air, vacuum and air blast supply for a gathering machine. Configuration: - for up to 16 stations gathering machine - with control for automatic switching on and off Technical specifications: compatible with: KOLBUS ZU 822, ZU 832, ZU 842 gathering machine

Year of construction: 2007, condition: used, Case maker Kolbus DA 260 Year: 2007 Djdpfx Ahszba Ebobjuw Description: - Board magazin for manual loading - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing quarter-bound cases in 2 passes - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 40 cycles/min Size range opened case (max): 670 x 390 mm. Size range opened case (min): 205 x 140 mm. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2015, condition: used, Renz ABL 500 automatic double wire binding system For book, skip and calendar binding Year: 2015 Equipped with: Colour monitor Manual infeed Binding section KAS calendar hanger feeder Dusdpfx Ahjzicv Dsbew Delivery Max mechanical speed: Upto 1.800 books/hour Upto 1.600 calendars/hour Pitch: 3:1 Size tools available: ¼” and 5/16” Working width: max 500 mm

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variatio from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm Dujdpfx Aozhwu Eohbew - Board centre strip width: 6 - 90 mm

Condition: used, Tabletop banding machine (bundling machine) Band/roll width: 30 mm Material: Paper from 70 g/m² or film from 80 µ (duplex film) Sealing: Heat sealing Frame size: 240 × 170 mm (WxH) Product size: Min.: 30 × 5 mm / Max.: 235 × 170 mm Dedpszim A Usfx Ahbsuw Output: approx. 26 cycles per minute Tension: infinitely adjustable (from soft to very tight) Power supply: 230 V / 50 Hz Machine dimensions: approx. 425 × 400 × 287 mm (WxHxD) Weight: approx. 28 kg

Year of construction: 2000, condition: used, Conveyor Kolbus FS.T Year: 2000 Dedpfx Ahsyt Dxiobjuw Description: - Transport system, length (approx): 350 cm.

Year of construction: 2001, condition: used, Frame dimensions: 380 x 200 mm Tape width: 30 mm Output: up to 25 cycles per minute Operating modes: Automatic (by loading) / Manual (via button) Applications: Stacks of paper, brochures, small boxes Dusdpfxsywi Hhe Ahbow Air supply: Not required Electrical specifications: 230 V, 50 Hz, single-phase, approx. 0.3 kW Available at short notice

Condition: excellent (used), Year of construction: 2023, Max. master reel width: 1000 - 1400 - 1600mm Max. master reel weight: Up to 3000kg Max. master reel diameter: 1000 to 1800mm Minimum standard slit: 20mm (other sizes on request) Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning 6 motors Dsdpfxezhwgbe Ahbeuw Automatic web tension control through loading cells APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals MATERIALS: PE, Aluminium, Papers, Laminates

Year of construction: 1998, condition: used, Horizon PJ-77 Jogger, used The Horizon PJ-77 jogger aligns paper stacks through vibration to ensure precise processing in printing and binding processes. - Compatible with the following Horizon collating towers: MC-80a, VAC-100a, VAC-60, VAC-1000, VAC-600 - Format: max. 470x318mm; min. 210x148mm - Stack height: max. 90mm - Lowering: max. 30mm Dsdpfx Aezhliqehbeuw - Dimensions: 490x400x460mm - Weight: 40kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 1998, condition: used, Horizon Stacker Receiving Tray with Right-Side Delivery, ST-20R, used The Horizon ST-20R stacker is distinguished by its special right-side delivery and provides an efficient solution for stacking and sorting printed materials. With its versatile stacking options, either flat or offset, it allows flexible handling of various print jobs. Key Features - Right-Side Delivery: The "R" in ST-20R stands for right-side delivery, which makes this model special. The right-side output allows for optimal adaptation to specific room configurations and workflows. Dodjzhlhyjpfx Ahbsuw - Works well with others: The ST-20 can be used with many Horizon machines, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600. - Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs. - Holds a lot: It can stack papers up to 320 mm high, which means fewer stops to empty it. - Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order. Technical Details - Biggest sheet size: 450 x 310 mm - Smallest sheet size: 185 x 128 mm - Stack height: Up to 320 mm - Dimensions: 652 x 550 mm - Weight: 62 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains Dusdpfx Ahezgd Enebsw - fully automated with amrys - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Year of construction: 2017, condition: used, Embossing machine Kolbus PE 312 Age: 2017 Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases. Configuration: - Copilot system with touch screen - Case pre-stacking conveyor (positioning with case overlap) - Case bending station - Case supply with 90 ° pivoting option (format-dependent) - Film feeder with two film pulling rollers Dedpfszgc Ibsx Ahbeuw - Unwinder - Film withdrawal unit - Motorised embossing head adjustment (max. 70 mm) - Divided embossing table plate - Correction rails for positioning precisely according to the register - Temperature-controlled embossing head heater with timer for pre-heating - Linear deposit belt with delivery table including overlap width setting - Automatic case counter - Servo-controlled drive technology based on Siemens technology - Counter-stacker delivery to the right with roller conveyor delivery Special equipment: - 1 embossing plate for accommodating the embossing tool (adhesive fastening) - 1 embossing plate with grid holes for accommodation (screw connection) - Case set-up outside of the machine for reducing the make-ready time - 3rd film pulling roller controlled by step motor for the 1st film feeder - 2nd film feeder with two film feed rollers controlled by step motors - 3rd film pulling roller controlled by step motor for the 2nd film feeder - Set-up for embossing time extension - Set-up for multiple embossing - Cycled feed for ideal utilisation of the film Technical specifications: - opened case (hardcover) max.: 660 x 405 mm - opened case (hardcover) min.: 155 x 100 mm - opened case (flexible embossing material) max.: 400 x 300 mm - opened case (flexible embossing material) min.: 135 x 100 mm - case pre-stacking conveyor min.: 155 mm - pressure surface max.: 460 x 355 mm - pressing force max.: 350 KN - mech. speed: up to 80 embossings/min

Condition: used, Horizon PJ-77 Jogger, used Dusdpfxsy U Hamj Ahbow The Horizon PJ-77 jogger aligns paper stacks through vibration to ensure precise processing in printing and binding processes. - Compatible with the following Horizon collating towers: MC-80a, VAC-100a, VAC-60, VAC-1000, VAC-600 - Format: max. 470x318mm; min. 210x148mm - Stack height: max. 90mm - Lowering: max. 30mm - Dimensions: 490x400x460mm - Weight: 40kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Criss Cross Delivery, used, by Stielow This Criss Cross delivery system is used in booklet production. It arranges book blocks in an alternating offset pattern, making it easier to separate and visually inspect the booklets. Dsdpsy U E Uiofx Ahbjuw This arrangement promotes efficient post-processing and improves stack stability. Although this model is older, the principle of Criss Cross delivery remains relevant in modern booklet production. All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, HORIZON Stacking Receiving Tray, ST-20, used The Horizon ST-20 is a smart and efficient tool for print shops. It helps organize and stack printed materials neatly, making work easier and faster. It takes printed sheets and stacks them in an organized way. It can stack sheets flat or slightly offset to the side, which helps manage different types of print jobs. Key Features - Works well with others: The ST-20 can be used with many Horizon machines, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600 - Flexible stacking: It can stack sheets flat or offset, adapting to different print jobs Dsdpfx Ahey U E Ipobsuw - Holds a lot: It can stack papers up to 320 mm high, which means fewer stops to empty it - Neat and tidy: The ST-20 stacks papers precisely, keeping everything in order Technical Details - Biggest sheet size: 450 x 310 mm - Smallest sheet size: 185 x 128 mm - Stack height: Up to 320 mm - Dimensions: 652 x 550 mm - Weight: 62 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2005, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2005 Consisting of Dujdpjyu Sp Sefx Ahbsw Gathering machine: Raccoglitrice MX - Hand feeding station - Number of gathering stations: 12 - Optical sheet control - Pump(s) - Distribution unit: MX Modulo - Colour monitor with touch screen - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 220 SAO - Colour monitor with touch screen - Automatic setting - Pre-loader - Feeder - 4 + 4 opening possibilities - Plus stacker - Excluding pump Sewing machine (2) Meccanotecnica Aster 220 SAO - Colour monitor with touch screen - Automatic setting - Pre-loader - Feeder - 4 + 4 opening possibilities - Book block separator - Plus stacker - Excluding pump Maximum size: 320 x 420 mm Minimum size: 100 x 150 mm Max speed MX gathering machine: 100 cycles/min Max stack height - Plus stacker: 150 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2002, condition: used, offer consists of: - horizontal conveyor ST-40 Horizon ST-40 incl. ST-CV Dodpsymxcpefx Ahbouw stacker receiving tray + horizontal conveyor - benefit: enable non-stop operation in spite of misfeed- and doublefeedcontrol - dimensions: 1.300x700x950mm - weight: 136kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2004, The SF-80 stands out particularly due to its large pre-stacking capacity of around 450 mm. The envelopes are pre-stacked upright and singulated by a special suction head. The transport occurs without deforming the material. Output conveyor Dodpfxewv S N No Ahbsuw

Condition: used, Year of construction: 1998, Format: 650 x 320 mm Equipment: 1 clamp Milling and Notching Station Spine Gluing Side Gluing Hotmelt Automatic Cover Feeder Nipping Station Up to 600 cycles/hour Dodpfx Aszkapdehbeuw Voltage: 3-phase, 400 V or 230 V 3.3 kW

Year of construction: 2004, condition: used, Conveyor Kolbus XTN 640 Year: 2004 Duodpfxozdc E Ns Ahbow Description: - Conveyor (90° to the left)

Year of construction: 2004, condition: used, Conveyor Dodpfjzdc E Aox Ahbjuw Kolbus XTN 640 Year: 2004 Description: - Conveyor (90° to the right)

Year of construction: 1999, condition: used, Computer-controlled hot foil embossing machine Schmedt Präzimark PMK 203 with a large number of type wheels, e.g: 563 / 610 697 - 2DP. / 635 564 / 667 610 / 16.. / 634 631 / 169 / 4,3 562 / 697 632 / 697 Dodpfx Aowvtqnshbouw 561 / 695 691-24P / 633 564 / 667 610-16P / 634 631 / 691 / 4,3 Technical data: Machine L x W x H: 850 x 630 x 765 mm Control cabinet L x W x H: 135 x 370 x 665 mm Space requirement L x W x H (machine only): 1200 x 890 x 1100 mm Weight, including control cabinet: 80 kg Power type: Alternating current, 1 phase Frequency: 50 Hz Voltage: 230 V Rated current: 2.0 A Output: 0.6 kW Fuse in the supply line: 10 A Cross-section of the supply cable: 1.5 mm² Length of connection cable: 2 m Pneumatic pressure: 0.6 min MPa