Used book binding machines for sale (357)

Condition: used, Year of construction: 2018, machine/vehicle number: BE2F 1145, Submitting a bid obligates you to collect the item by December 23, 2026! MACHINE DETAILS Voltage: 230 V Mains connection: 1 + N Gkodpfx Ae Agvr Isglsd Frequency: 50 Hz Note: Accessories are provided without warranty. The principle applies: "Item purchased as is". The prospective buyer must verify the completeness of the item on site.

Condition: like new (used), Year of construction: 2021, Unique opportunity for an absolutely like-new Schmedt hardcover production line! The line has a total of only 99 units on the overall counter. Reading taken from the PräLeg XL. It was only assembled for testing in 2021 and has not been used since, therefore the condition is absolutely excellent! ____ Schmedt PräziCoat | Type 238-20 Two-roller gluing machine for cold and hot glue. Year of manufacture: 05/2021 Roller width: 400 mm Dimensions W x D x H: 77 x 62 x 40 cm Weight: 75 kg Schmedt PräDeck | Type 2360 Covering machine Year of manufacture: 04/2021 Dimensions W x D x H: 72 x 57 x 36 cm Weight: approx. 25 kg Schmedt PräKant | Type 1600 Edge trimming and rubbing machine Year of manufacture: 04/2021 Dimensions D x W x H: 46 x 97 x 34 cm (without tables) Dimensions D x W x H: 111 x 97 x 34 cm (with tables) Weight: 65 kg Schmedt PräLeg XL | Type 18-60 Book block gluing and hanging machine Year of manufacture: 05/2021 Dimensions D x W x H: 104 x 67 x 185 cm Weight: approx. 325 kg Schmedt PräForm XS | Type 72-00 Gjdpfx Ags Ai S Inslekd Book press and spine creasing machine Year of manufacture: 12/2020 Dimensions W x D x H: 60 x 57 x 49 cm Weight: 92 kg

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, working width: 220 mm, stack height: 640 mm, type of input current: three-phase, product height (max.): 220 mm, product width (max.): 640 mm, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Gedpfxextau Es Agljkd Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm

Condition: used, Year of construction: 1979, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 2,500 kg, total height: 1,660 mm, total length: 7,000 mm, total width: 1,600 mm, input frequency: 50 Hz, Automatic Creasing and Riveting Machine by Kugler Automatic creasing and riveting machine from Kugler, designed for efficient and precise processing of binders and other cardboard products. The machine performs both creasing and riveting automatically, ensuring consistent, professional results while improving production efficiency. Gedpfxs Ah Tm Ne Aglskd The machine can handle formats ranging from 175 × 350 mm up to 340 × 600 mm, making it suitable for the production of binders and other products in various sizes.

Condition: used, Year of construction: 2000, functionality: fully functional, Smyth Sewing Machine 160 Maximum Mechanical Speed: 10,800 cycles/hour Min. Signature Size: 80 x 135 mm (off-line) Max. Signature Size: 320 x 420 mm (off-line) Gkodpfx Ajxzzruogljd Number of Sewing Stitches: 8 Sewing Stitch Length: 24 mm Power Consumption: 4 kW Standard Voltage: 400V–50Hz, 3Ph Max. Air Consumption: 200 Nl/min at 6 bar Total Weight: 2500 Kg Machine Dimensions (L x W x H): 1.7 x 2.67 x 1.7 mt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Good morning, for sale is a complete IML set, which includes: IML DA 500 – 2017, an electro-pneumatic bookbinding machine, used for mechanically gluing the book block into the cover. Gkodpfxs Afcmfj Agled IML DA 600 - 2017, used for embossing and shaping the spine in hardcover books. IML DA 2002 – 2017, a semi-automatic binding machine, used for assembling covers and endpapers in hardcover books or game boards. IML DA 175/c - 2019, a glue machine/machine for manually applying cold glue to paper and other materials with a basis weight of 80 to 500 g/m2. Price for the entire set: 63,000 PLN / 15,000 EUR.

Condition: used, Year of construction: 2009, functionality: fully functional, space requirement length: 14,000 mm, space requirement width: 2,000 mm, total height: 1,500 mm, total length: 12,000 mm, total width: 1,500 mm, year of last overhaul: 2025, Equipment: documentation/manual, Folding-Gluing machine Inramik Vesta 800 Plus 2009 - In production, 2 shifts per day, first owner - Up to 3 gluing points, Velco gluing system - Minimum box width 65mm - Maximum box width 800mm - Glue line monitoring/detection system - 1 ejector unit - Press section equipped with an acceleration/speed-up feature - Air nozzles and full tooling for CD envelopes and sleeves - Suction system at the feeder - Support rails (2 per section, 8 in total) - Central guides, including the upper assembly for packaging alignment - Glue pot converted to a conical fitting (similar to Bobst machines) – a more advanced solution - Two glue wheels, 5mm and 3mm - Belts replaced on a regular schedule Gsdpfx Age Aa I Nnjlskd The machine has been continuously maintained by our in-house maintenance team; in excellent working condition throughout its entire service life. - Price includes dismantling and loading. Price: 45,000 EUR

Condition: excellent (used), Year of construction: 2007, operating hours: 15,700 h, functionality: fully functional, Equipment: compressor, documentation/manual, Müller Martin Sammelhefter Bravo Plus T comprising: 4 x double feeders 1555.0403 incl. ASIR, 1 x folding feeder 1529.0417, 1 x Semko 0333.0435 (year 2018), 1 x stitching machine 0380.0450, 1 x three-knife trimmer 0449.0430. Includes DruVa pumps, optional PIAB. Godpsyamrljfx Aglekd

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Listing Title JMD Superbinder Challenger-5000 Perfect Binding Line with Supertrimmer-100 Three-Knife Trimmer (2013) Key Technical Data Category: Post-press / Bookbinding machinery / Perfect Binding Line Manufacturer: JMD Machinery Corporation Limited (Shenzhen, China) Binder Model: SUPERBINDER CHALLENGER-5000 Serial Number: 0Y25114 Date of Manufacture: March 2013 Three-Knife Trimmer Model: SUPERTRIMMER-100 (In-line) Total Power: 55 kW Power Supply: 3-Phase / 380 V Net Weight: 5,800 kg Machine Dimensions: 10,300 × 1,900 × 1,410 mm Certification: CE compliant Condition: Very good, fully operational, installed in production, and available for running demonstration System Configuration & Features Gkjdpj Af Hf Sjfx Aglod JMD Challenger-5000 Perfect Binder: Automated block feeding and high-precision spine preparation station with milling and notching tools. Hot-melt adhesive system with dual application units for spine gluing and side gluing. Automatic cover feeder equipped with scoring and creasing mechanisms. Integrated waste paper chip extraction and bag filtration system. Cooling & Conveying Section:Extended conveyor belt setup ensuring gradual cooling and adhesive curing prior to trimming. Automatic Three-Knife Trimmer:SUPERTRIMMER-100 synchronized in-line unit for automated three-side final book trimming.

Condition: used, Year of construction: 2011, functionality: fully functional, SEMI AUTOMATIC CASE MAKER MACHINE Godpew Inytsfx Agljkd DARIX EVOLUTION LIGHT

Condition: excellent (used), Year of construction: 2021, type of input current: three-phase, input voltage: 400 V, overall weight: 600 kg, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a ZECHINI Symphony 3 machine for creasing cardboard with a thickness of 1.5 mm to 4 mm, equipped with V-profile blades (120° angle). The machine allows for creasing in up to four different points without creating dust, and also enables kiss-cutting of the cardboard. The machine is used in the production of both rigid covers and boxes; it also allows for trimming the corners of the sheet. The machine has been used very little. Gedpj Aaynpofx Agljkd It is possible to purchase additional V-profile blades (90° angle) and U-profile blades.

Condition: excellent (used), Year of construction: 2022, Ref: 11171 . 2022 IML S74/13 Pneumatic Corner Cutting Machine Single-head pneumatic corner cutter for paper and board finishing, suitable for bookbinding and cover-making applications. Specification: Gsdo Ah D Snjpfx Aglskd Operation: Pneumatic Cutting thickness: 0–35 mm Cutting stroke: 50 mm Cutting angle: Dependent on fitted tooling Overall dimensions: 700 × 550 × 1,250 mm (L × D × H) Weight: Approximately 100 kg

Condition: excellent (used), Year of construction: 2020, Ref: 11170 . 2020 Grafmasz GC-480 PRO Semi-Automatic Case Maker Integrated gluing and case-making machine for producing hard book covers, photo albums, folders and presentation cases. Features: Vacuum-assisted positioning LED spine illumination and powered turning-in and pressing rollers Specification: Maximum open cover size: 480 × 770 mm with 20 mm turn-ins Minimum open cover size: 145 × 145 mm Maximum gluing width: 520 mm Board thickness: 2–4 mm Spine width: 1–100 mm Turn-in allowance: 10–20 mm Gluing speed: Variable, 5.6–16 m/min Output: Approximately 120–180 covers/hour, depending on materials and operator Covering material: 80–300 gsm for gluing; 80–250 gsm for turning-in Adhesives: Cold water-based or hot animal glue Glue tank capacity: 4 litres Glue temperature: Up to 90°C Power supply: 400 V, three-phase, 50 Hz Power consumption: 3.8 kW heated / 0.8 kW unheated Compressed air: Not required Dimensions: Approximately 1,600 × 1,600 × 1,120 mm Weight: Approximately 500 kg Godpfxo Ah D Rio Aglokd

Condition: excellent (used), Year of construction: 2015, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, safety light barrier, Kolbus Cantobox / Boxline – Complete rigid box line – 2015/2016 – Excellent condition Gkjdpfxezq Txle Agled For sale: Kolbus Cantobox / Boxline, a complete and fully equipped rigid box production line, built 2015–2016, recently acquired and in very good technical and optical condition. This line is designed for professional, industrial production of luxury rigid boxes, cases and covers, and represents genuine German engineering quality. ⸻ Line configuration * SW.A 500 – Automatic carton infeed (blank feeder) * SW.H 500 – Quadformer & holder * SW.E 500 – Corner cutter * SW.L 400M – Puncher * TS.L – Transfer / turning station * Complete CE safety enclosure * Integrated Kolbus control system with HMI * Fully automatic continuous operation ⸻ Production capacity * The complete line operates with individual module speeds between approx. 25 and 40 cycles per minute, depending on box size, material and machine setup. ⸻ Technical details * Manufacturer: Kolbus GmbH & Co. KG (Germany) * Year of manufacture: 2015 / 2016 * Power supply: 3 × 400 V / 50 Hz * Compressed air: approx. 6 bar * CE marked * Made in Germany ⸻ Condition * Very clean and well-maintained line * Low mechanical wear visible * Original Kolbus components throughout * No structural modifications * Includes tooling, spare parts and manuals ⸻ Applications * Rigid boxes / luxury boxes * Premium packaging * Hardcover and case production ⸻ Location & delivery * Machine located in The Netherlands * Inspection possible by appointment * Professional dismantling and loading available * Worldwide export assistance possible ⸻ Price: €125,000 (ex works / loaded on truck – strongly competitive for this configuration) Availability: immediately

Condition: good (used), The Regubinder RBS is a bookbinding machine ideal for binding books and documents. This device is perfect for small print runs or private use, allowing you to achieve professional results. Gkodpfx Age Aiwyneljd

Condition: used, Year of construction: 2023, HXCP HX360 Hardcover Casing-In Machine (2023 Model) Gkjdpfszbykqsx Aglod Note this machine new is over $70,000 USD. Asking for $39,000 or best offer for quick sale. Buyer responsible of removal and shipping. Link to YouTube video is included in the listing. Available for sale is a 2023 HXCP HX360 automatic hardcover notebook/book casing-in machine. The machine was purchased new in 2023 and has been used in our hardcover book production operation. It is designed for automatic casing-in of hardcover books, journals, notebooks, and similar products. We are selling this machine because our production requirements have grown and we are upgrading to a larger, higher-capacity binding line that better fits our current workflow. The machine is currently located in New Jersey * HXCP HX360 * Year: 2023 * Automatic hardcover casing-in machine * Suitable for hardcover books, notebooks, and The machine is being sold as-is, where-is, with Please contact us for additional photos, videos, specifications, and pricing.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) TRANSFER SYSTEM TO ROTORBINDER THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE Godpozdyx Sefx Aglskd THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. A video demonstrating the machine's operation can be sent upon request. Gkjdpfezuzxhox Aglsd

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: Gkjdpfx As Aidc Dsglod The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: refurbished (used), Year of construction: 1961, We are selling an operating Casing in Line from the Berlin location. This consists of a casing-in machine built in 1961 and a pressing unit built in 1973. An extensive modernisation took place in 2021/2022. The drive of the machine and the safety equipment were renewed. The machine can be inspected at any time. Speed 500-800 pcs/h depending on personnel. Gkedpfx Aen Nv Sdogled

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine, Type Vorwärts 1100 Fully automatic; carrier sheet and top sheet are processed automatically. Suitable for a wide range of applications: corrugated cardboard, paperboard, half cardboard, fabrics, films. Max. format: 1000 x 1400 mm Min. format: 200 x 280 mm Weight of carrier material: approx. 250 g/m2 - approx. 5 mm Weight of top sheet material: approx. 80 g/m2 - approx. 800 g/m2 Up to 2,000 lamination cycles per hour. Documentation and wiring diagrams are available. Incoterm EXW (Ex Works) The machine is in operation and can be inspected. Gkodpfey D D A Dox Aglod

Condition: good (used), Karl Krause Hot stamping press Manufactured by Karl Krause, Germany, Gksdpe Aitimofx Agljd The machine is fully operational, after modernization of the control system. Extendable work table. Timer control allows the machine to be started at a specific time to ensure it is ready for operation. 380V power supply. Heating plate size: 400x530mm. Weight: approx. 800kg.

Condition: used, Fan Gluing Machine with Drying Section, Dust Extraction Unit and Milling Station Binding method: Hot-melt adhesive binding Feeding: Manual Equipped with: Drying section Dust extraction unit Milling station Gksdpfxs Ait Tdj Aglod The machine is in working condition and can be inspected in production until January 2027.

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Gksdpsz Sm U Ajfx Aglsd Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Condition: good (used), Sumbel Herold 500 Gluing Machine This machine is like new, fully functional and ready for production. This is the most valued brand among small laminating machines. Ideal for producing covers, decorative packaging, and more. Made in Germany. The machine operates on hot glue. It features a built-in heating plate and a water bath. Brass rollers. Infinitely adjustable: glue thickness, gap width, and speed. Working width: 500mm Power supply: 380V Weight: 60kg Gksdpfx Age Aitiielsd