Condition: excellent (used), Year of construction: 2019, Ref: 10965 . 2019 Horizon HT-1000V Variable Trimmer ONLY 2.2m books trimmed! Inline or offline variable three-knife trimmer capable of zero make-ready on book trim size and thickness changes. Perfect for short run production, and book of one production which can be achieved through barcode driven set-up. Features: Setup automatically on the fly by reading a barcode at the entrance of the trimmer. Also capable of automatic set-up from the operator panel for same size production runs. Djdpfx Afjwu Spts Djun One-to-one book production with variable sizes can be produced. Both untrimmed and trimmed sizes can be variable, for true variable format production. Can be used solo or placed in-line with Horizon perfect binders. Specification: Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm/ 13.780” x 12.600” Limitation: Maximum length from the center to top or bottom is 175 mm/ 6.889”. Min. Spine Length 148 x Fore-edge Length 105 mm/ 5.825” x 4.130” Limitation: The minimum length from the center to top or bottom is 74 mm/ 2.91”. Trim Width: Fore-edge: Max. 110 mm/ 4.330” Min. 1 mm/ 0.04” Top and bottom: Max. 80 mm/ 3.150” Min. 1 mm/ 0.04” Trim Height: 1 to 65 mm/ 0.04” to 2.560” Production Speed: 400 to 1,000 cycles per hour (Higher production can be reached with piled books)

Year of construction: 2004, condition: used, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control Duedpsyh I Smofx Af Den - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Ref:10906 . 2004 Herzog + Heymann M7 Multiple Folder. A very versatile folding machine in excellent condition. It is not only a high speed automatic B1 buckle folder for standard section and leaflet work, but also a specialist folder capable of folding maps, multiple roll folding and concertina folding. Comprising; MBO R700 'Perfection Dualfeed' round pile continuous feeder ‘Vacu-Infeed’ for mark free and smooth sheet running ‘Vacu-Alignment’ adjustable vacuum in tape roller infeed of register table Features include:- • MBO MCC Total and batch counter • Stainless steel buckle plates • Sound hoods • Frequency controlled A.C. drive motor & dual action compressor • MBO ASP 66-2 ME Presser/marker delivery unit • Complete with spares, tools & manuals. Folding sequence: 1st buckle unit - 72cm with 16 plates, perforating/scoring shafts Specification: Sheet size, Max: 72 x 104 cm (continuous feeder) Min: 15 x 20 cm Minimum fold length: 4.2 cm Speed range : 40 - 160 m/min. Dodpfxew Eu Igs Af Deun

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Dodpfx Afevtcvie Deun Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: like new (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, input voltage: 220 V, Plockmatic PBM 350-m including BookFold Module and Trimmer Module. This booklet maker is in excellent, lightly used condition! Counter readings: PBM 350-m: 84,403 BookFold Module: 75,752 Trimmer Module: 93,238 - Produces professional booklets inline or offline with stapling and folding. - Capacity: up to 35 sheets of paper (80 gsm) for folded booklets, approximately 140 pages - Supported paper sizes: width from approx. 206 mm to 320 mm, length up to approx. 457 mm - Compatible with A- and B-formats as well as many custom sizes. Looking for other options on the machine? We are flexible and can configure the machine according to your requirements! This machine has been checked and thoroughly tested by our own specialized technical team. If you require further information, please do not hesitate to contact us. Dusdpfx Aoyhnggjf Djn Worldwide shipping available.

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Djdpfshqhcisx Af Doun Machine nr: 104/1656

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Djdjt Rmhajpfx Af Doun Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station Duedpfex Ahl Dsx Af Djn - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Dedjx Dkk Sspfx Af Djun Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 1996, condition: used, Co-pilot, starfeeder, rounding & backing, gluing, gauzing, book mark suction device, gluing, head & tail banding, pressing, casing-in, case prestacking, case bending, case forming, Kolbus FE 603, Kolbus DS 391 Hard cover book line Consisting of: Kolbus BF 525 - FE 603 - DS 391 Year: 1996 - 2000 - 2002 Description: - Automatic setting - Co-Pilot with touchscreen - Book measuring table - Starfeeder - Pre-heater (hot air) Dedpsvw Al Eofx Af Doun - Rounding and backing station - Glue unit - Gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 603 Year: 2000 Description: - Pressing station - Right hand infeed - Integrated hydraulic - Straight delivery Book stacker Kolbus DS 391 Year: 2002 - Turning device - Delivery in reverse direction - Straight delivery Book production line: Compact 2000 SC Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 125 mm Book block format (max): 270 x 375 x 80 mm Book block format (min): 100 x 125 x 4 mm Max. mechanical speed: 50 cycles/min . Book forming and pressing machine: FE 603 Product size (max): 315 x 385 x 90 mm Product size (min): 70 x 100 x 6 mm Max. mechanical speed: Up to 62 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2007, condition: used, Sewing line Meccanotecnica Multiplex SA Year: 2007 Gathering machine: Raccoglitrice MX - Number of gathering stations: 18 Dujdpfx Ast Sz T Hef Don - Optical sheet control - Pump(s) - Distribution unit - Distribution section into 2 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 2007 - Colour monitor - Pre-loader - Optical sheet control - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker Sewing machine (2) Meccanotecnica Aster 2000 Year: 2005 - Pre-loader - Optical sheet control (BAK) - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus stacker

Year of construction: 2007, condition: used, Case maker Hoerauf BDM Speed Year: 2007 The BDM Speed is a high speed casemaker with an output of 85 cases per minute, specially designed to meet the requirements of medium and large size companies, for the production of book cases with rigid or flexible spine, as well as one-piece cases for ring binders and letter files. Description: - Colour monitor - Automatic setting - Board pre stacking conveyor - Board magazin - Board cutter: KS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control Dsdpovcmilofx Af Djun - Device for producing quarter-bound cases in 2 passes - Pressing station - Stacking delivery - Pump Palletiser Solema Cartesio Year: 2006 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system Hörauf (also known as Hoerauf or Horauf) Size range opened case (max): 680 x 380 mm Size range opened case (min): 190 x 130 mm Max. mechanical speed: Up to 85 cases/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2011, Case maker Dusdewdgfzspfx Af Dsn Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: Dsdpfx Aov N U U Nsf Deun - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: used, Year of construction: 2008, Saddle stitcher Müller Martini Primera A110 Year: 2008 +/- 9.400 production hours Operation / Control - Colour monitor with touch screen Feeders - Horizontal signature feeders: 6 x 1555 - Cover feeder: 1529 - Pump(s) Stitching unit Müller Martini 0380.0452 - Oblique sheet control - Thickness control - Stitching heads: 2x HK75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 0449.0430 - Sets of knives: 1 - Center cutting device - Sets of knives: 1 Delivery Dsdpfx Ajx Dkk Ejf Djun Müller Martini Perfetto (0450.0401) - Compensating stacker - Delivery to the left Description modified on 4-4-2025

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 - Hand feeding station(s) - Horizontal signature feeders: 2 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left Technical specifications: Max. mechanical speed 14.000 cycles/hour Sizes (uncut) Max. 320 x 480 mm Min. 85 x 128 mm Duedpfx Ash Ezmief Dsn Sizes (cut) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Condition: used, Year of construction: 1992, Perfect binding line Müller Martini Year: 1992 Consisting of Book block feeder Dusdpfx Afjvgt Dke Den ITM Gathering machine Müller Martini 210-E Description: - Hand feeding station - Number of gathering stations: 18 - Pump(s) - Set up element - Criss cross delivery - Book block feeder: 3606 - Transfer into the binder Perfect binder Müller Martini 3006 /30" Hour counter: +/- 14.700 Description: - Number of clamps: 30 - Main milling station - Roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared): IRT - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Probag - Base for side glue system - Hotmelt side glue unit, interchangeable - Gauzing station - Stream cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - HF High Frequency dryer - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: Dsdpfxok H Sfho Af Dsun - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Condition: used, Year of construction: 1995, Perfect binding line Wohlenberg Master 6501 Year: 1995 Consisting of Gathering machine Wohlenberg Sprinter 7010 Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST (total 4 of 24) - Excluding pump(s) - Machine was connected to a centralised air system Dusdpfx Afjtt Ug Ij Djn - Set up element - Transfer into the binder Perfect binder Wohlenberg Master 6501 Description: - Number of clamps: 18 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - Gauzing station - Rotary cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Transport system vertical, length (approx): 30 mtr - Escape delivery Description modified on 14-04-25

Condition: used, Year of construction: 2005, Perfect binding line Kolbus KM 473 Year: 2005 Gathering machine Kolbus ZU 841.A Description: - Hand feeding station - Number of gathering stations: 12 - ATC thickness control - Set up element - Pile delivery with delivery conveyor: ZA 841 - Intermediate element - Transfer into the binder - Pump(s): Becker Aircenter Perfect binder Kolbus KM 473 Year: 2005 Description: - Co-Pilot with touch screen - Number of clamps: 27 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 370 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Gauzing station - Pile cover feeder: RA 48.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Note: Solema book block feeder shown on the photos is not included in the price! Duodpfxeyhdd Ue Af Djn

Condition: used, Year of construction: 2003, Perfect binding line Muller Martini Tigra (1570) Year: 2003 Consisting of Gathering machine Muller Martini 1571 Description: - Hand feeding station - Number of gathering stations: 8 (4x twin) - Set up element - Transfer into the binder - Pump(s) Dujdpfx Aoyhdb Tef Don Perfect binder Müller Martini Tigra (1570) Year: 2003 Description: - Digital display - Number of clamps: 9 - Milling and roughening station - Dust extraction system - Hotmelt spine glue unit - Premelter for spine glue unit: Nordson KB 50 - Hotmelt side glue unit - Premelter for side glue unit - Pile cover feeder - Nipping and pressing station - Lay down device Additional elements available for extension of the gathering machine, upon request. Max. mechanical speed: 1.000 - 3.600 c/hr Book block format (max): 370 x 280 x 40 mm. Book block format (min): 120 x 100 x 3 mm. Cover size (max): 380 x 620 mm. Cover size (min): 120 x 203 mm. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: Duedpfx Afjvqbhls Djn - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot - Air table - Pallet dispenser Dedpfx Aexg Nzhjf Dsun - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production Dedpfx Afswpfv Ae Djun - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Description: - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Dusdewnbv Aspfx Af Dsn Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!