Used cutting machines for sale (341)

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour Fobwxtbezq D Iqecopk

Condition: good (used), Year of construction: 1992, Paper cutting machine, Polar 115 EM. Manufactured in 1992. Programmable control, monitor, air table, and light barriers. Fsbwxeztqnvstbcspk

Condition: good (used), Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply Key features: Fsbozt H Tzjwxtbcopk The machine has a full EP programmer with the ability to save individual steps to memory. Hydraulic pressure beam drive, fully adjustable pressure from 200-1100N Electromechanical knife and saddle drive Automatic pressure synchronized with the knife’s cutting movement Electronically controlled saddle adjustment knob with adjustable speed Side tables Photocells „SCS” safety system, including: Electronically controlled two-handed cutting start Automatic knife return from any position Transparent cover on the rear table Laser cutting indicator Additional equipment includes: spare knife, cutting sticks, tool kit, paper stack tapping device, safe knife change device, and documentation.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Fjbwozt H Tnsxtbcspk Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Fpjbezt H S Djwxtbcsk Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: good (used), Adast Maxima MS 58S Guillotine The machine is fully operational, in excellent technical and visual condition. It has just been serviced. The set includes a spare knife, cutting stick, paper stacker, and tools. Technical specifications: Fpsbwxtbszt H Sqscek Working width: 580mm Stack height: 85mm Power supply: 380V Weight: 450kg All key components are made of cast iron, including a flywheel and adjustable pressure force – this is a professional production guillotine in a compact design. Electronic approach controller, cutting line, and safety guards.

Condition: good (used), Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable program with 99 steps each, electronic saddle position reading with 1/10 mm accuracy, and a self-diagnostic system with error messages displayed on the screen. The machine’s main work table is made of stainless steel and has a blower. A paper ejection function is included for ease of use. Technical data: Cutting length 721 mm Infeed height 80 mm Infeed depth 720 mm Fpsbwxtoztz Elsbcok Front table depth 530 mm Minimum final offcut 20 mm Minimum final offcut with beam guard in place 90 mm Power supply 400 V / 50 Hz 1.5 kW Weight 588 kg Dimensions 1335 x 1305 x 1540 mm Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator (Laser), Air table (on front and rear tables), Pedal for pre-marking the cutting line, Front table made of chrome-nickel steel, Blade made of high-quality HSS steel, Safety features ensured by: safety curtains – photocells transparent safety cover on the rear table safe drive – IDEAL patent two-handed, electronically controlled cutting start automatic knife return from any position main switch equipped with a key switch knife replacement possible with the blade permanently covered

Condition: good (used), Paper cutting guillotine Perfecta 76 TVC Device in perfect condition, very low mileage. After general renovation in 2013. Technical data: Cutting width: 760 mm Stack height: 110 mm Weight: 1650 kg Power supply: 400 V Equipment: – programmer with touch screen – photocells Fpebeztz Efewxtbcjk – air table – cutting line – chrome table surface – enlarged side tables – hydraulic clamp with smooth force regulation – instructions – full set of tools – plate for clamp – tapping block – spare knife

Condition: good (used), Year of construction: 2006, functionality: fully functional, Stack cutter IDEAL 5221-05 Digicut with hydraulic clamping Febwxtbjztrkrecjpk Year of manufacture: 2006, machine fully functional and well-maintained 52 cm cutting width 8 cm working height Hydraulic clamping pressure infinitely adjustable from 200-1100N Program function and direct dimension input Manual pre-clamping via foot pedal 1 new blade Electrical connection 230V/50Hz, 250 kg

Condition: good (used), Conveyor belt for scraps from guillotine M-Fordersysteme Production Germany Year of manufacture 2015. Fpebweztn R Iextbcsk Working width 46 cm, conveyor length approx. 250 cm. Discharge of trimmings from under the machine directly to the container. Material pressing roller, upper cover preventing spillage of the excavated material.

Condition: like new (used), Ideal 5255 paper cutting guillotine The machine is 100% operational, after a review in very good condition. Fpebwxteztn Itsbcjk This is the currently produced model, the latest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max distance between the saddle and the knife: 520mm power supply 230V Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with an accuracy of 1/10 mm electronic handwheel with stepless speed adjustment of the backgauge mm/inch switching Electromechanical drive of the knife and pressure beam Transparent safety covers laser cutting line two-hand cutting start, electronically controlled automatic return of the knife from any position Additional equipment includes: side tables, a spare knife, a split, tools for replacing the knife, including a safe grip, tapping block and documentation.

Condition: good (used), Paper guillotine EBA 5260 The machine is 100% functional, after inspection in very good condition. This is the currently produced, newest model. Technical data: working width: 520mm stack height: 80mm minimum remnant: 35mm max. distance of the saddle from the knife: 520mm 230V power supply Basic features: 99 programs, each 99 steps data entry via LCD touch screen electronic digital display with 1/10 mm accuracy electronic handwheel with graduated speed regulation of the rear limiter Fsbjztn Igowxtbcepk switching mm/inch Electromagnetic knife and pressure beam drive Photocells laser cutting line two-handed cutting start, electronically controlled automatic knife return from any position Additional equipment includes: spare knife, stick, knife replacement tools including a safe handle, tapping block and documentation.

Condition: excellent (used), Year of construction: 2006, Ref:11129 . 2006 Perfecta Seypa 92-TVC Guillotine Comprising; Central air table with blower Steel side air tables to left & right Electronically controlled 2 speed back gauge Colour display with soft key pad 8000 cut positions with 400 programmes Minimum programme step 1 mm Illuminated cutting area Infra-red light beam guard with FFM Knife change device 2 HSS knives Including tools & manuals. Fpebwxezmydystbcok Specification: Cutting width, Max: 92 cm Feed table depth, Max: 92 cm Clamp opening, Max: 13.5 cm Number of cuts : 44/min. (cont. operation).

Condition: excellent (used), Year of construction: 2006, Ref:11130 . 2006 Perfecta SL-10P Pile Lift + SA-100A Jogger. Comprising; Perfecta SL-10P Mobile pile lift with steel plate. Keeps pile at a constant height, electronic eye for automatic lifting/ lowering. Casters for mobility. Swinging control panel for left or right side use Lowering safety device, 1,5 kVA - 380 V. Lifting capacity 1000 kg, maximum size 90 x 130 cm. Perfecta SA-100A Paper Jogger with Air Removing Roller. Comprising; Fpebezmycpowxtbcok Air table and left & right side flaps for smooth pile flow Tilting table with adjustable angle for light or heavy stock Tilt action to the left or right Automatic air removing roller – various functions Including air table blower unit. N.B. In-house, 6 bar compressed air line required. Specification: Maximum Paper Size: 76 × 109 cm to 110 × 165 cm (depending on the exact sub-variant). Stack Height Capacity: Up to 160 mm Power requirements : 3pH, 380-415V, 1.5kW.

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING Fpobezmx Scswxtbcsk No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Fpebezmx Nujwxtbcsk Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: new, functionality: fully functional, With this offer, you are purchasing a used accessory option ‘SDD Belt Stacker BST6800&BST6900’. Item for sale: 1 x SDD Belt Stacker BST6900: Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally. Fjbweytcpyextbcopk

Condition: used, Year of construction: 2000, cutting width 55 cm Fpobwxtbjy Tpmtjcok feeding depth 57 cm feeding high max. 9,5 cm

Condition: used, Year of construction: 1978, cutting width 38 cm feeding depth 30 cm feeding high max. 10 cm serial no. 2949-003 Febjzt Szqjwxtbcjpk three knife trimmer

Condition: refurbished (used), Overview The IDEAL 5560 hydraulic guillotine, also available as the EBA 5560, is designed for commercial printers, digital print businesses and in-house print departments where precision, reliability and productivity are essential. Manufactured in Germany to an exceptionally high standard, the IDEAL 5560 combines powerful hydraulic cutting performance with a programmable electronic control system, delivering fast, accurate and repeatable cutting across a wide range of print finishing applications. Professionally refurbished by Glendale Presentation Solutions, this machine has been fully inspected, serviced and tested by our experienced engineers to ensure it is ready for reliable production from day one. This 5560 Guillotine also includes the optional side tables. Whether you're producing business cards, brochures, books, presentation documents or general commercial print, the IDEAL 5560 delivers the accuracy, durability and performance expected from one of the industry's most respected hydraulic guillotines. Key Features 550mm cutting width Hydraulic blade drive Hydraulic clamp Programmable electronic control system Electric backgauge with digital position display Memory functions for repeat cutting programmes Adjustable clamp pressure Optical cutting line EASY-CUT two-hand blade activation Infrared safety curtain Safe blade changing device Heavy-duty German construction Fpjbszrhyaswxtbcek Why Choose the IDEAL 5560? Proven hydraulic cutting performance Precision programmable backgauge Heavy-duty German engineering Fast, accurate and repeatable operation Built for long-term reliability Ideal for commercial, digital and in-house print departments

Condition: used, Year of construction: 2015, Technical Data (New 525,000) Working Area: ▪ Working width: 360 mm ▪ Working area: 350 × 350 mm Laser & Power: ▪ Dual laser system (Laser Class I) ▪ 2 × ROFIN SINAR laser source at 230 W ▪ Full-Cut option for dual laser operation Production Capacity: ▪ Speed up to 60 m/min Software & Control: ▪ SEI ICARO ▪ ICARO license ▪ Integrated PC with touchscreen Material Handling: ▪ Servo unwind unit with web guide (Ø 76 mm) ▪ Quick-change rewind unit ▪ Scrap grid removal with winding & web heating ▪ Roll-to-sheet station ▪ 2 × cutting unit incl. 15 knives Vision / Registration: ▪ Barcode on the fly ▪ Register & web control Extraction & Cooling: ▪ Extraction system 5.5 kW ▪ Closed cooling circuit incl. Material Handling: ▪ Servo unwind unit with web guide (Ø 76 mm) ▪ Quick-change rewind unit ▪ Scrap grid removal with winding & web heating ▪ Roll-to-sheet station ▪ 2 × cutting unit incl. 15 knives Vision / Registration: ▪ Barcode on the fly ▪ Register & web control Extraction & Cooling: ▪ Extraction system 5.5 kW ▪ Closed cooling circuit incl. Material Handling: ▪ Servo unwind unit with web guide (Ø 76 mm) ▪ Quick-change rewind unit ▪ Scrap grid removal with winding & web heating ▪ Roll-to-sheet station ▪ 2 × cutting unit incl. 15 knives Vision / Registration: ▪ Barcode on the fly ▪ Register & web control Fjbwxszhwf Rstbcjpk Extraction & Cooling: ▪ Extraction system 5.5 kW ▪ Closed cooling circuit incl. Water cooling unit

Condition: good (used), Year of construction: 2001, machine/vehicle number: 3789-001, Standart Machine Fpsbezqtk Uowxtbcjk Chrom Airtable Colour Screen Display Side-table left with Air Side-table right with Air BAUMANN NUP 650: Paper Stack Lift Jogger Heinrich Baumann BSB 3/L

Condition: excellent (used), Year of construction: 2013, Perfecta 168TS BASA fully automated cutting system year 2013 consisting of Perfecta 168TS cutting machine BASA 7 automatic jogger with automatic paper feeder ZTS 2000 paper pile loader for the rear table of the cutting machine BA6 unloader very little use very good condition located in Germany testing possible Fobwxezqtpdotbcspk

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Fsbwxszrfdietbcjpk Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Year of construction: 2005, Size untrimmed: max 320 x 490 mm; min 103 x 140 mm Size trimmed: max 307 mm; min 100 mm Cover weight: 100 - 350 g/m² Fobwxtbjtuwnqjcspk Speed: 1.000 - 6.000 Takte/min Power requirement: 10 kW Weight: 3.800 kg Equipment • 2 set of knives